Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Diamond Grinding Bits 5mm
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	Engraving tool GG
2 x	Collet Set for accurate use on round components
1 x	Flexishaft MICROMOT 110/P
1 x	Diamond Cutting Discs
2 x	Micro Compound Table KT 70
2 x	Corundum grinding disc for LWS
2 x	Three-jaw steel drill chuck
1 x	Complete Engraving Kit with trial glass
1 x	Replacement carving blades for MSG
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Diamond Cutting Discs
3 x	BGA-Bottom-103
1 x	BGA-Bottom-21
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
4 x	BeeHive208S
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Screwdriver 2.5
2 x	Dividing attachment TA 230 for PF 250
2 x	sanding belts for BBS/s Grit 240
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	BGA-Bottom-1
1 x	Crimping plier for BNC
1 x	Screwdriver bit set. 49-piece.
1 x	BGA-Bottom-105
1 x	Diamond Cutting Discs
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/BF
1 x	Diamond Grinding Bits 1mm
2 x	Corundum sanding discs for LWS
1 x	Flap Wheels
1 x	Tungstein carbide rasp - and cutting disc
2 x	Corundum sanding discs for LWS
1 x	BGA-Bottom-202
1 x	Mill/Drill System BFW 40/E
2 x	Centre Turning Attachment
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Cutting disc, with reinforcement
2 x	sanding belts for BBS/s Grit 80
1 x	BeeProg2
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Sanding fleece for LWS
2 x	Diamond-coated cutting disc for MIC
1 x	IC Test clip 20 pins
1 x	Sanding fleece for LWS
2 x	BGA-Bottom-10
2 x	SmartProg2
1 x	Screwdriver 1.5
1 x	BGA-Bottom-199
1 x	Cross-recess Screwdrivers 1
3 x	BGA-0245/0241
2 x	Crosscut 'Super-Cut' blade
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	BGA-Bottom-20
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Core box bit 3.2mm
3 x	Step clamps made of steel
4 x	Chuck for TBM 220
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Screwdriver 2.5
3 x	BGA-Bottom-11
2 x	Diamond-coated cutting and roughing disc
1 x	Cylinder shaped milling cutters
1 x	Screwdriver 1.0
1 x	Screwdriver 2.0
1 x	Corundum bound cutting disc for LWS
1 x	Cross-recess Screwdrivers 0
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Cups brushes
2 x	BGA-Bottom-111
1 x	Replacement belts for BSL 220/E
1 x	Corundum grinding disc for LWS
1 x	Cross-recess Screwdrivers 1
2 x	Diamond Coated
1 x	Diamond Twist Drills
1 x	Pensander PS 13
2 x	Replacement glue sticks for HKP 220
1 x	Cotton polishers
1 x	BGA-0245/0243
1 x	BGA-Bottom-201
2 x	BGA-Bottom-125
2 x	BGA-0245/0242
3 x	Beeprog2C
2 x	BGA-Bottom-106
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	BGA-Bottom-212
2 x	Aluminium Die-Cast
1 x	BGA-Bottom-216
2 x	Gear Chuck
2 x	Diamond cutting blade for OZI
3 x	Pinça SOIC de 8 pinos
1 x	Cutting tools of high quality cobalt HSS steel, ground
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	BGA-Bottom-198
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x
1 x	BGA-Bottom-211
2 x	Diamond blade
1 x	Multipurpose Vices Primus 75
3 x	BGA-0246/0243
1 x	BGA-Bottom-209
3 x	BeeHive204
2 x	Blade holders for DS 460
1 x	Corundum fan sander for LWS
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Cylindrical cutters
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Disc cutters
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Four Jaw Chuck
2 x	BGA-0246/0244
1 x	BGA-Bottom-196
1 x	BGA-Bottom-208
1 x	Diamond Cutting Discs
2 x	Tool holder for rotary tools
1 x	MICROMOT tool holder
1 x	Lever Dial Indicator
1 x	Cotton polishers
1 x	BGA-Bottom-115
1 x	Disc Sander TG 125/E
1 x	Super safety and specialty bit set, 75-piece
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Conjunto de três brocas de ponto
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	sanding belts for BBS/s Grit 150
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT drill stand MB 200
1 x	Router base OFV
1 x	BGA-Bottom-217
1 x	Corundum fan sander for LWS
1 x	Blade for Wood and Plastics
2 x	Three jaw chuck for the lathe DB 250
3 x	Combi cutter 6.5/2.5mm
3 x	Precision steel vice PM 40
1 x	MICRO Miller FF 230
1 x	Multipurpose Vices Primus100
1 x	Fixed Steady
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	BGA-Bottom-101
1 x	BGA-Bottom-195
1 x	Screwdriver 3.0
1 x	14-piece parallel supports set
2 x	BGA-Bottom-108
1 x	DIL48/QFP100 ZIF PLD-3
2 x	Sanding pads for OZI 220/E grit 80
1 x	Grinding mop cylinder grit 120
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL32/MLF32-1 ZIF
1 x	DIL28/QFP52 ZIF-CS SX52
2 x	Half round cutter 13mm
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	sandpaper for PS 13 Grit 240
2 x	Fluted filter for CW-matic
1 x	DIL48/QFP100 ZIF MSP430-1
2 x	Tungsten Carbide Tipped (TCT)
1 x	Silicon-Carbide.
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	Slot cutter 5.0mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	TIP SPT-4
1 x	DIL48/QFP100 ZIF PLD-4
1 x	Tungsten carbide cutters set
3 x	HSS immersion saw blades for OZI
1 x	Sanding pads for OZI 220/E grit 150
2 x	Edge cutter with pin 6.4mm
2 x	HSS immersion saw blades for OZI
1 x	Slot cutter 3.2mm
1 x	Supercut jig saw blades of special steel
1 x	DIL32/QFP64 ZIF H8-1
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
2 x	Rebating cutter 6.4mm
2 x	HSS cutting blade for OZI
1 x	BGA-Bottom-118
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	Rounding over cutter 6.4mm
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	DIL48/TSOP48 ZIF 15.4mm
2 x	V-slot cutter 6.5mm
1 x	Machine Vice MS 4
1 x	Super-Cut
1 x	Jig saw blades made of HSS
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	BGA-Bottom-126
1 x	DIL40/QFP64-4 ZIF NEC-1
2 x	10-piece wood router cutter set
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Tungsten tipped saw blade
1 x	DIL48/QFP100 ZIF PLD-1
1 x	Five piece HSS chisel set
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL40/QFP64 ZIF LPC-1
3 x	Sanding pads for OZI 220/E grit 240
2 x	Fine dust paper filter for CW-matic
1 x	DIL40/QFP144 ZIF H8S-1
1 x	Independent four jaw chuck for the DB 250
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Bottom PSOP44 NOR-2
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Bottom PSOP44 NOR-1
1 x	DIL48/QFP100 ZIF PLD-2
1 x	DIL28/TSOP28 ZIF 11.8 mm
2 x	Slot cutter 6.5mm
1 x	sandpaper for PS 13 Grot 180
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	Bottom PSOP44 NOR-3
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	High quality corundum grinding bits
1 x	Saw blade made of high-alloy special steel
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	BGA-Bottom-102
1 x	DIL40/QFP80 ZIF M37702
1 x	Angle cutter 45 °
1 x	Top PSOP44 ZIF 600mil
1 x	Solid carbide saw blade

€63,735.56