Top » Catalog » Programmers and acessories » GANG programmers » 60-0053

€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Ball-shaped diamond coated 2.2mm
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x TIP SPT-3
1 x Mill/Drill Unit BFB 2000.
2 x 
1 x Sanding pads for OZI 220/E grit 240
1 x TIP SPT-6
1 x Slot cutter 3.2mm
1 x HSS cutting blade for OZI
1 x Precision caliper 500mm
1 x Universal polishing paste
2 x Screwdriver bit set. 49-piece.
1 x Slot cutter 6.5mm
1 x Tungsten tipped saw blade
1 x Dividing attachment TA 230 for PF 250
2 x Universal and oil siphoning pump AP 12
1 x HSS immersion saw blades for OZI
1 x Centre Turning Attachment
1 x Four Jaw Chuck
1 x Bench drill press TBH
1 x Collet Set for accurate use on round components
1 x Spare cutting wire
1 x Cutter head for copy and surface milling MT3
1 x Coarse-toothed (25 TPI per 25mm)
1 x Brass brushes
1 x Fixed Steady
1 x Dial gauge
1 x Coarse-toothed (10 TPI per 25mm)
1 x TIP SPT-4
1 x Angle polisher WP/E
1 x Steel tape measure
1 x sanding belts for BBS/s Grit 80
1 x IC tweezers
1 x Precision caliper square
1 x MICRO Miller FF 230
1 x 6-piece socket wrenches ESD
1 x Angle cutter 45 °
1 x Rounding over cutter 6.4mm
1 x Digital caliper gauge 300 mm
1 x Multipurpose Vices Primus100
1 x Belt sander BBS/S
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x 6-piece wrench key set ESD
1 x Aluminium Die-Cast
1 x Backing disc for LWS
1 x Rebating cutter 6.4mm
1 x V-slot cutter 6.5mm
1 x Blade for Steel and brass
1 x Cutting disc, with reinforcement
1 x Steel brushes
1 x Hot wire cutter THERMOCUT 230/E
1 x Half round cutter 13mm
2 x Super safety and specialty bit set, 75-piece
1 x Precision steel vice PM 40
1 x Tool holder for rotary tools
1 x 6-piece screwdriver and cross-recess set ESD
1 x Cups brushes
1 x Band knife of hardened spring band steel (without teeth)
1 x Edge cutter with pin 6.4mm
1 x Step clamps made of steel
1 x sanding belts for BBS/s Grit 240
1 x Sanding pads for OZI 220/E grit 80
1 x Cutter head for copy and surface milling MT2
1 x 6-piece screwdriver set ESD
1 x Glass fibre contact cleaner brush
1 x Stainless steel brushes
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Brass contact cleaner brush
1 x Tungsten Carbide Tipped (TCT)
1 x Steel wheels
1 x Solid carbide saw blade
1 x Slot cutter 5.0mm
1 x TIP SPT-2
1 x Gear Chuck
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x HSS immersion saw blades for OZI
1 x Core box bit 3.2mm
1 x Wheels brushes
1 x Lever Dial Indicator
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x TIP SPT-10
1 x Ball-shaped diamond coated 3.2mm
1 x Coarse-toothed (18 TPI per 25mm)
2 x 14-piece parallel supports set
1 x TIP SPT-9
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Footswitch FS
1 x 2-speed scroll saw DSH
1 x Felt cloth polishing disc (100 x 15mm)
1 x Bench drill machine TBM 220
1 x sanding belts for BBS/s Grit 150
1 x Radius Cutting Attachment, complete with pointed tool
1 x Diamond cutting blade for OZI
1 x Hot wire cutter THERMOCUT 650
1 x Mill/Drill System BFW 40/E
1 x 10-piece wood router cutter set
1 x Sanding Drums
1 x EUROline top cutter
1 x Combination pliers 205mm
1 x TU 2004V
1 x Diamond Grinding Bits 1,8mm
1 x TU 1503V
€8,039.24
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Corundum fan sander for LWS
Corundum fan sander for LWS
€4.45
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online