€4.75 + VAT

FREEZER-BR 200ml
[1461412]

FREEZER-BR 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-BR is CFC-free.
  • It ensures reliable cooling down to -50°C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, flammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 0.54 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: flammable
ODP: 0.00

Reviews

Customers who bought this product also purchased
DUSTER-BR 200ml
DUSTER-BR 200ml
DEGRESER 200ml
DEGRESER 200ml
Glass fibre contact cleaner brush
Glass fibre contact cleaner brush
Manufacturers
1 x Mill/Drill System BFW 40/E
1 x Belt sander BBS/S
1 x Hot wire cutter THERMOCUT 650
1 x Flexible silicon discs
1 x Polishing machine PM 100
1 x Super-fine sanding discs grain 000
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x broca de alta duração de 0,2mm
2 x Combi cutter 6.5/2.5mm
1 x Earth wire with dummy Schunko-plug
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x 
1 x Safety insulated screwdrivers 14-604 VDE
1 x 6-piece screwdriver and cross-recess set
1 x Tungsten tipped saw blade
2 x HSS boring tool set, 6 pieces
1 x Collet Set for accurate use on round components
1 x Angle polisher WP/E
1 x Precision Vice FMZ
1 x Flap Wheels
1 x Diamond Cutting Discs
1 x Supercut jig saw blades of special steel
1 x Table Saw TKS 2500 SC
1 x MICROMOT Mains Adapter NG 5/E
1 x ESD Tweezers 5-194
1 x Stainless steel wheels
2 x Centre Turning Attachment
1 x Cups brushes
1 x MICRO cutter MIC
1 x 6-piece TORX-screwdriver-set
1 x Tungsten carbide cutters set
1 x Universal and oil siphoning pump AP 12
1 x High quality corundum grinding bits
1 x Polishing felt, medium hard
1 x Flap Wheels
1 x sclcr2525M12
1 x BIT-SET
1 x Solid carbide stylus for engraving
1 x Morse taper MT2 - B16
1 x Tungsten Carbide Tipped (TCT)
1 x Earth wire
2 x Five piece HSS chisel set
1 x Coarse-toothed (18 TPI per 25mm)
1 x Super-Cut
1 x Disc Sander TG 125/E
1 x Wolfram vanadium steel milling bits
1 x IC tweezers
1 x Professional Drill/Grinder IBS/E
1 x Slot cutter 6.5mm
1 x Super-fine sanding discs grain 400
2 x Tungsten carbide drills Ø1mm
1 x Cutting tool 10 mm
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Lambswool polishing disc
1 x Machine Vice MS 4
1 x Four Jaw Chuck
1 x 6-piece screwdriver and cross-recess set
1 x Table Sawr TKS 315 E
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x MICROFLAM gas soldering set MGS
1 x MICROMOT tool holder
1 x TIP SPT-10
2 x Bench Circular Saw KS 230
1 x Broca de alta duração de 2.7mm
1 x Router base OFV
2 x Bench drill press TBH
2 x Diamond Coated
1 x Ball-shaped diamond coated 3.2mm
2 x MICROMOT 50/EF
1 x Replacement glue sticks for HKP 220
1 x Crosscut 'Super-Cut' blade
1 x Sanding Drums
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Felt cloth polishing disc (100 x 15mm)
1 x Edge cutter with pin 6.4mm
1 x Corundum sanding discs for LWS
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x 6-piece set of ESD/EGB tweezers
1 x Long neck straight drill/grinder LB/E
1 x Earthing module
1 x Brass brushes
1 x SCLCR1010E06
1 x MICROFLAME burner MFB/E
1 x 6-piece screwdriver and cross-recess set
1 x Band knife of hardened spring band steel (without teeth)
1 x Step clamps made of steel
1 x Corundum bound cutting disc for LWS
1 x OPTI BF20L VARIO
1 x Ceramic-tipped tweezers and ESD 5-096
1 x Ball-shaped diamond coated 1.2mm
1 x Sanding pads for OZI 220/E grit 240
1 x Milling cutter set (2 - 5mm)
1 x V-slot cutter 6.5mm
1 x Conjunto de três brocas de ponto
1 x Tungsten carbide drills Ø2mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Slot cutter 3.2mm
1 x Diamond Twist Drills
1 x MICROMOT 50
1 x Corundum sanding discs for LWS
€9,002.84
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook