Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	6-piece screwdriver set ESD
1 x	IT 150 - Indirect dividing attachment
1 x	Combination pliers 185mm
1 x
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Turning inserts WCMX050308F
1 x	precision machine vices FMS200
1 x	Telephon pliers straight 200mm
1 x	MICRO Miller MF 70
2 x	MICRO Miller FF 230
1 x	Microfibre cloth
1 x	Grinding mop cylinder grit 120
1 x	Cylinder sander WAS/E
1 x	Polishing felt, medium hard
1 x	Lever Dial Indicator
1 x	MICROMOT 230/E
1 x	Wire strippers 160mm
1 x	Broca de alta duração de 2.4mm
1 x	Super-fine sanding discs grain 000
1 x	Round nose pliers 185mm
1 x	Super-fine sanding discs grain 2000
1 x	Grinding and Polishing Machine SP/E
1 x	EUROline mini side cutter
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Cross-recess Screwdrivers 1
1 x	ESD Tweezers 5-194
1 x	Cross-recess Screwdrivers 000
2 x	Protective device for hand-operated MICROMOT
2 x	TIP SPT-2
1 x	EUROline side cutter pointed head
1 x	VASELINE 200ml
2 x	Cross-recess Screwdrivers 00
2 x	DUSTER-BR 200ml
2 x	Component tweezers 5-006
1 x	Precision caliper square
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	MICROMOT tool holder
2 x	Cross-recess Screwdrivers 1
2 x	Earth wire with dummy Schunko-plug
1 x	SILICONE 200ml
2 x	Footswitch FS
1 x	TIP SPT-3
1 x	ESD Brushe
1 x	TOP-PIN 200ml
2 x	End side cutters 45º EUROline-Conductive
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mini side cutters EUROline-Conductive
1 x	Telephone pliers stright 205mm
1 x	Crocodile clip
1 x	Screwdriver 2.0
1 x	Handy 1515
1 x	Flat nose pliers 165mm
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	TORX-screwdrivers T8
1 x	Flexishaft MICROMOT 110/BF
3 x	MICROMOT drill stand MB 200
1 x	Combination pliers 210mm
1 x	Combination pliers 190mm
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Cross-recess Screwdrivers 1
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	TORX-screwdrivers T9
1 x	IC Test clip 20 pins
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	surface planing and thicknessing ADH 200
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Contact bracelet with spiral cord
1 x	TORX-screwdrivers T5
1 x	Cross-recess Screwdrivers 0
1 x	Screwdriver 3.0
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Telephone pliers bent 165mm
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Sanding Drums
1 x	14-piece parallel supports set
1 x	ESD-handling ser 9-361
1 x	Steel tape measure
1 x	SMD Tweezers 5-051
1 x	Screwdriver 3.0
2 x	Tweezer teflon-coated 5-107-9
2 x	Edge cutter with pin 6.4mm
1 x	Fibre-Cut Discs
1 x	ESD Brushe
1 x	Wire strippers 165mm
1 x	Telephone pliers bent 205mm
2 x	6-piece screwdriver and cross-recess set
1 x	Polishing Set
1 x	Sanding fleece for LWS
2 x	Lathe System PD 400
2 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Slot cutter 6.5mm
1 x	Solid carbide stylus for engraving
1 x	TIP SPT-6
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	SMD Tweezers 5-062
1 x	Fibre-Cut Discs
1 x	Diamond Twist Drills
1 x	Wire strippers 160mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Saw blade made of high-alloy special steel
1 x	Set of special steel cutters
1 x	Round nose pliers 165mm
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Flat nose pliers 160mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Tweezer teflon-coated 5-021-9
1 x	HSS boring tool set, 6 pieces
1 x	Conj 5 pinças ESD
1 x	Broca de alta duração de 0.3mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Felt polishers
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Sanding bands 14x13mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Four Jaw Chuck
1 x	sanding belts for BBS/s Grit 150
1 x	Wolfram vanadium steel milling bits
1 x	Broca de alta duração de 0.9mm
3 x	TORX-screwdrivers T10
1 x	Hand magnifier with LED light 3X
1 x	Corundum sanding discs for LWS
1 x	Broca de alta duração de 1.2mm
1 x	Replacement belts for BSL 220/E
1 x	Broca de alta duração de 2.1mm
1 x	Cross-recess Screwdrivers 2
1 x	MICROMOT glue gun HKP 220
1 x	Flexible polishing pad set
1 x	Surface planer AH 80
1 x	Tungsten tipped saw blade
1 x	Tungsten carbide drills Ø1mm
2 x	Corundum fan sander for LWS
1 x	Nylon Fleece Brushes
1 x	Corundum grinding disc for LWS
1 x	Corundum grinding disc for LWS
1 x	Half round cutter 13mm
2 x	Micro Compound Table KT 70
1 x	TORX-screwdrivers T6
1 x	Aluminium Die-Cast
1 x	Broca de alta duração de 0.4mm
2 x	Backing disc for LWS
1 x	Broca de alta duração de 1.5mm
1 x	Diamond Grinding Bits 1mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Felt polishers
1 x	Thicknesser DH 40
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 0.8mm
1 x	6-piece TORX-screwdriver-set
1 x	TORX-screwdrivers T4
1 x	Angle cutter 45 °
1 x	Socket Wrenches 4.0
1 x	Bench drill press TBH
1 x	Solid carbide saw blade
1 x	TORX-screwdrivers T5
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	High quality corundum grinding bits
1 x	Spare cutting wire
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	TORX-screwdrivers T8
1 x	Supercut jig saw blades of special steel
1 x	Socket Wrenches 5.5
1 x	Three-jaw steel drill chuck
1 x	Wolfram vanadium steel milling bits
1 x	DIL8/SOIC8-1 ZIF 170mil
1 x	Grinding mop cylinder grit 120
1 x	EUROline top cutter
1 x	DIL28/PLCC28 ZIF-CS
1 x	BGA-Bottom-18
1 x	BGA-Bottom-166
1 x	Telephone pliers bent 205mm
1 x	Sanding Drums
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	BGA-Top-3 ZIF-CS
1 x	Bottom PSOP44 NOR-2
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	BGA-Bottom-223
1 x	BGA-Bottom-191
1 x	High quality corundum grinding bits
1 x	EUROline flat nose pliers
1 x	BGA-Bottom-154
1 x	TORX-screwdrivers T10
1 x	Core box bit 3.2mm
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	High quality corundum grinding bits
2 x	Sanding Discs
1 x	Hot wire cutter THERMOCUT 650
1 x	Milling cutter set (2 - 5mm)
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	BGA-Bottom-165
1 x	BGA-Bottom-187
1 x	BGA-Bottom-16
1 x	High quality corundum grinding bits
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4

€13,909.25