Top » Catalog » Lathes » Optimum Lathes » 3420330

€1,860.00 + VAT

TU 2404
[3420330]

quantum D 250 x 550 - Lathes for the demanding user

Convincing arguments: quality, efficiency and price

  • Precision-manufactured
  • Concentricity precision - lathe chuck smaller than 0.05 mm
  • Concentricity precision - spindle nose smaller than 0.009 mm
  • With saddle slide, compound slide and cross slide
  • Automatic longitudinal/leadscrew drive
  • Hardened work spindle with 2 adjustable taper roller bearings
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Massive, matured prismatic bed may of grey cast iron, matured at least for six months inductively hardened (HRC 42-52) and precision-ground
  • User-friendly automatic off-switch according to IP 54 with low-voltage release, EMERGENCY-STOP button and right-handed/left-handed rotation
  • High-grade lathe chuck protection
  • Manufactured according to DIN 8606 (toolmaker’s precision)
  • High value stability
     

Extent of supply:

  • 3-jaw chuck Ø 125 mm
  • Fixed centre MT2
  • Fixed centre MT3
  • Lathe chuck protection
  • Lathe dog
  • HSS cutting tools
  • Rear splash guard
  • Chip pan
  • Quadruple tool holde
  • Operating tools
  • Change gear kit 10 pcs. from 0.4 to 3 mm and inch-based (10-44 TPI) thread
  • Test certificate

Technical data

Centre height 125 mm
Distance between centres 450 mm
Turning diameter (max.) 250 mm
Spindle hole 21 mm
Spindle taper MT 3
Spindle speeds 125 - 2,000 rpm
Number of steps 6
Pitch - Metric 0.4 - 3.5 mm/rev
Pitch - Inch 10 - 44 TPI
Longitudinal feeds 0.1 - 0.2 mm/rev
Top slide travel 70 mm
Cross slide travel  120 mm
Tailstock taper MT 2
Tailstock-sleeve travel  70 mm
Motor power  750 W 230 V ~50 Hz
Dimensions (L x W x H) 1020 x 520 x 560 mm
Net weight 125 kg

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x TU 1503V
2 x Combination pliers 210mm
1 x Wire strippers 160mm
2 x Side cutters 170mm
1 x 4-jaw chuck individually clamping 100mm
1 x Jig saw STS 12/E
1 x Telephone pliers stright 205mm
2 x Motor-driven carving device MSG
1 x MICRO woodturning lathe DB 250
1 x Side cutters 160mm
1 x Morse taper MT3 - B16
1 x MICRO Band Saw MBS 240/E
1 x 3-jaw chuck centrically clamping 100mm
1 x Telephone pliers stright 165mm
1 x 3-jaw chuck centrically clamping 160mm
2 x Super jig saw STS/E
1 x Surface planer AH 80
1 x Table Saw FET
2 x TU 2004V
3 x 4-jaw chuck individually clamping 125mm
2 x Precision quick-action drill chuck 0-8mm B16
1 x Precision magnetic gauge stand
2 x Wire strippers 165mm
5 x Lathe System PD 400
1 x TIP SPT-2
2 x Cut off/mitre saw KGS 80
2 x Telephone pliers bent 165mm
2 x Combination pliers 185mm
2 x Thicknesser DH 40
3 x Precision lathe PD 250/E
2 x Precision steel vice PM 40
2 x Morse taper MT2 - B16
1 x Telephone pliers straight 205mm
2 x Combination pliers 170mm
1 x centrically clamping 100mm
2 x MICRO shaper MP 400
1 x Inpection mirror 1-978
2 x Telephone pliers bent 205mm
1 x Precision Vice FMZ
2 x Multipurpose Vices Primus 75
4 x BeeHive204
1 x 3-jaw chuck centrically clamping 80mm
3 x centrically clamping 125mm
1 x Combination pliers 190mm
1 x Wire strippers 165mm
1 x Round nose pliers 165mm
2 x Side cutters 195mm
1 x Dial gauge
1 x Scroll saw DS 230/E
1 x Bench Circular Saw KS 230
3 x Hot wire cutter THERMOCUT 650
1 x Flat nose pliers 165mm
3 x Machine Vice MS 4
3 x PRINTER 200ml
3 x magnifier 3.25 x Ø 45mm with additional lens
2 x MULTI 200ml
2 x PROTECTION 200ml
2 x SPRAYOIL 200ml
1 x EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x Pinça SOIC de 8 pinos
2 x Precision quick-action drill chuck 0-10mm B16
2 x PROLUB 200ml
3 x FREEZER-BR 200ml
3 x POLISHER 200ml
3 x BeeHive208S
2 x SPRAYFLON 200ml
2 x quantum revolving center CM2
3 x FREEZER-TOP 200ml
3 x BeeProg2
2 x SILICONE 200ml
4 x Hand magnifier with LED light 3X
1 x DEGRESER 200ml
2 x IC Test clip 20 pins
1 x TOP-PIN 200ml
2 x DUSTER-BR 200ml
2 x SCREEN 200ml
1 x Precision Vice FMS 75
1 x quantum revolving center CM1
1 x ANTISTATIC 200ml
1 x CD-CLEANER 200ml
1 x MICROFLAM gas soldering set MGS
3 x High quality corundum grinding bits
2 x Cotton polishers
1 x BGA-0245/0242
1 x HSS drill bits 1.0mm
2 x Collet chuck ER32 for D250X550
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
2 x broca de alta duração de 0,6mm
1 x MICRO-screwdrivers
2 x Broca de alta duração de 0.4mm
1 x Tungsten carbide cutters set
1 x Cone shaped milling cutter
3 x Broca de alta duração de 2.4mm
1 x Tungsten carbide drills Ø1mm
3 x Bench drill press TBH
2 x Quick-action tool holder kit SWH AA
3 x Conjunto de três brocas de ponto
1 x Long neck angle grinder LHW
2 x Broca de alta duração de 0.7mm
1 x Polishing paste
1 x Broca de alta duração de 1.2mm
1 x Flexishaft MICROMOT 110/P
1 x Flap Wheels
1 x Replacement glue sticks for HKP 220
3 x broca de alta duração de 0,2mm
2 x Precision quick-action drill chuck 0-13mm B16
2 x Tool holder type H for SWH 1-A
1 x Grinding mop cylinder grit 240
1 x BGA-0245/0243
1 x Delta sander OZI/E
2 x Fibre-Cut Discs
2 x Milling cutter set (2 - 5mm)
1 x BGA-Bottom-102
2 x Hot wire cutter THERMOCUT 230/E
2 x Collet chuck ER25 for D250X550
2 x Broca de alta duração de 1.0mm
3 x Broca de alta duração de 0.5mm
1 x BGA-Bottom-101
2 x Broca de alta duração de 1.3mm
1 x BGA-Bottom-10
1 x Sanding bands 14x13mm
3 x Broca de alta duração de 1.5mm
3 x Broca de alta duração de 2.2mm
3 x Cutting tool 10 mm
3 x Broca de ponto 3.15 x 1.00
2 x Cutting tools of high quality cobalt HSS steel, ground
3 x Broca de ponto 8.00 x 3.15
2 x Broca de alta duração de 1.1mm
2 x Super safety and specialty bit set, 75-piece
2 x Universal and oil siphoning pump AP 12
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Milling cutter set (6 - 10mm)
1 x Broca de alta duração de 2.8mm
2 x Face clamping disc for D250X550
1 x BGA-Bottom-11
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x MICROMOT Mains Adapter NG 2/E
1 x Angle polisher WP/E
1 x Precision drill grinder FBS 12/EF
1 x Sanding Discs
1 x Precision quick-action drill chuck 0-16mm B16
3 x Broca de alta duração de 2.5mm
2 x HSS boring tool set, 6 pieces
2 x Corundum bound cutting disc for LWS
1 x Coarse-toothed (10 TPI per 25mm)
3 x High quality corundum grinding bits
1 x Collet Set for accurate use on round components
1 x Disc Sander TG 250/E
4 x Cutting tools of high quality cobalt HSS steel, ground
2 x Broca de ponto 3.15 x 1.25
2 x Flexible polishing pad set
2 x Flexible silicon discs
2 x Five piece HSS chisel set
1 x MICROMOT glue gun HKP 220
3 x Broca de alta duração de 2.3mm
2 x machine base with shelves for D250X550
1 x Super-fine sanding discs grain 400
3 x Fibre-Cut Discs
3 x Broca de alta duração de 0.9mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x 3-jaw chuck centrically clamping 125mm
2 x Long neck angle milling/drilling unit LWB 220/E
1 x Cotton polishers
3 x Flap Wheels
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Blade holders for DS 460
1 x Sanding bands 14x13mm
3 x Compact workshop vacuum cleaner CW-matic
3 x Felt polishers
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x TIP SPT-3
1 x Follow rest for D250X550
2 x Broca de alta duração de 0.8mm
1 x MICROMOT Mains Adapter NG 2/S
1 x Sanding Discs
1 x Multipurpose Vices Primus100
1 x MICROMOT Mains Adapter NG 5/E
2 x Beeprog2C
1 x Broca de alta duração de 3.0mm
1 x Super-fine sanding discs grain 2000
2 x HSS twist drill set with centring pin
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Long neck straight drill/grinder LB/E
1 x Cutting disc, with reinforcement
1 x TU 2404
2 x Fibre-Cut Discs
1 x Replacement carving blades for MSG
2 x MICRO Miller FF 230
1 x Corundum grinding disc for LWS
1 x lathe tools 10mm
2 x Professional Drill/Grinder IBS/E
2 x Flexible polishing pad set
1 x Lambswool polishing disc
1 x Sanding Drums
2 x MICRO Miller FF 500
1 x HSS drill bits 0.8mm
1 x Diamond Cutting Discs
1 x Corundum grinding disc for LWS
1 x BGA-Bottom-108
3 x Universal holder UHZ
3 x Tool holder type D for SWH 1-A
1 x Combi cutter 6.5/2.5mm
3 x MICROMOT 50/E
1 x Broca de ponto 5.00 x 2.00
1 x High quality corundum grinding bits
1 x Polishing machine PM 100
1 x HSS twist drill set to DIN 338
1 x Sanding Drums
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Steady rest for D250X550
1 x BGA-0246/0244
1 x Fibre-Cut Discs
2 x Complete Engraving Kit with trial glass
1 x High quality corundum grinding bits
1 x Chuck for TBM 220
1 x Screwdriver bit set. 49-piece.
1 x MICROMOT 50/EF
1 x BGA-0245/0241
2 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x Hand Magnifier 2-293
1 x Precision Drill/Grinder FBS 240/E
2 x Broca de alta duração de 2.1mm
1 x Disc Sander TG 125/E
1 x Tungsten carbide drills Ø1,5mm
1 x Grinding mop cylinder grit 120
1 x Broca de alta duração de 2.9mm
1 x Sanding fleece for LWS
1 x BGA-Bottom-106
1 x Plastic magnifying glass
2 x Belt sander BBS/S
1 x Broca de alta duração de 1.4mm
1 x Sanding Drums
1 x Tungsten Carbide Tipped (TCT)
1 x High quality corundum grinding bits
1 x Crimping plier for BNC
1 x Belt sander BS/E
1 x Lathe tools 10mm pastilhados
1 x MICROMOT 50
1 x Lathe chuck flange for D250X550
1 x Broca de ponto 6.30 x 2.50
1 x Flexible silicon discs
1 x Metal Cutting Blades
1 x BGA-0246/0243
1 x Sanding Drums
1 x MICROMOT 230/E
1 x Grinding mop cylinder grit 80
1 x Tungsten carbide drills Ø2mm
2 x Felt polishers
1 x BGA-Bottom-125
1 x Cylinder sander WAS/E
1 x High quality corundum grinding bits
1 x 10-piece wood router cutter set
1 x Steel wheels
1 x Bench drill machine TBM 220
2 x Engraving tool GG
1 x Set of precision cutters
1 x Corundum fan sander for LWS
1 x SmartProg2
2 x Corundum fan sander for LWS
1 x Set of special steel cutters
1 x Dividing attachment TA 230 for PF 250
1 x Solid carbide stylus for engraving
1 x Gear Chuck
1 x Drill chuck with sliding sleeve for the tailstock
1 x Stainless steel cups
1 x Slot cutter 6.5mm
1 x V-slot cutter 6.5mm
2 x Three piece thread cutting set
1 x 2-speed scroll saw DSH
1 x Corundum sanding discs for LWS
1 x Band knife of hardened spring band steel (without teeth)
1 x Felt cloth polishing disc (100 x 15mm)
1 x Three jaw chuck for the lathe DB 250
1 x Rounding over cutter 6.4mm
1 x Four Jaw Chuck
1 x Solid carbide stylus for engraving
1 x Backing disc for LWS
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x MICRO Miller MF 70
1 x Blade for Steel and brass
1 x Crosscut 'Super-Cut' blade
1 x 14-piece parallel supports set
1 x Tool holder for rotary tools
1 x Cups brushes
1 x Slot cutter 5.0mm
€82,520.73
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Super-fine sanding discs grain 000
Super-fine sanding discs grain 000
€3.82
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online