€65.44 + VAT

MICROMOT 230/E
[28440]

MICROMOT 230/E
For drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing of glass-fibre reinforced POLYAMIDE with a soft component grip area enables the unit to be handled with two fingers (pen grip). Balanced, low noise special DC motor with high life expectancy. The maximum speed of 21,500rpm can be continuously reduced to 6,500rpm through full-wave electronics. Offering nearly the same torque also in the lower speed range. This is especially important for micro drilling, brushing and polishing. Ground, ball-bearing spindle. High quality MICROMOT steel collets: Even the smallest shafts are accurately clamped. No rattling or vibrating of bits and cutters. Spindle for tool exchange can be locked at the push of a button. 20mm collar for use in MICROMOT drill stands and horizontal stands. Includes MICROMOT steel collets (1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm). Technical data: 220 - 240 V. 50Hz. 80W. 6,500 - 21,500rpm. Weight 270g. Class 2 insulation.
Reviews

Manufacturers
1 x High quality corundum grinding bits
1 x Flexible silicon discs
2 x Diamond Coated
1 x Tungsten carbide drills Ø1,5mm
1 x High quality corundum grinding bits
2 x Flexible polishing pad set
1 x Cotton polishers
1 x Felt polishers
1 x HSS drill bits 0.5mm
2 x Conjunto de três brocas de ponto
1 x PROTECTION 200ml
1 x High quality corundum grinding bits
2 x Felt polishers
1 x Polishing paste
1 x PROLUB 200ml
2 x Metal Cutting Blades
1 x Felt polishers
1 x HSS drill bits 1.0mm
1 x Felt polishers
1 x High quality corundum grinding bits
1 x SPRAYOIL 200ml
1 x Flexible polishing pad set
1 x Cotton polishers
2 x Super-Cut
1 x Flexible silicon discs
1 x Tungsten carbide drills Ø1mm
1 x SPRAYFLON 200ml
1 x Cutting disc, with reinforcement
1 x Socket Wrenches 3.5
1 x Socket Wrenches 3.0
1 x Socket Wrenches 2.5
1 x Brass contact cleaner brush
2 x Sanding pads for OZI 220/E grit 240
1 x Corundum sanding discs for LWS
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
2 x Diamond Cutting Discs
1 x Polishing felt, medium hard
1 x Drill chuck with sliding sleeve for the tailstock
1 x Side cutters 160mm
1 x FLUX DISPENSING PEN, LEAD FREE
1 x Microfibre cloth
1 x Professional set for finish grinding and polishing
1 x Diamond cutting blade for OZI
2 x HSS cutting blade for OZI
1 x HSS immersion saw blades for OZI
1 x Machine Vice MS 4
1 x Fibre-Cut Discs
1 x Sanding pads for OZI 220/E grit 80
1 x Tungsten carbide cutters set
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Coarse-toothed (25 TPI per 25mm)
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x BGA-0246/0244
1 x DIL28/QFP64 ZIF H8/3644
1 x DIL44/SOIC44 ZIF-CS
3 x Fixed Steady
1 x IC tweezers
1 x Corundum grinding disc for LWS
1 x BGA-Bottom-108
1 x DIL48/QFP100 ZIF PLD-3
1 x DIL48/PQFP100 ZIF ST92Fxxx
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Replacement cutting disc for MICRO cutter MIC
1 x DIL48/PQFP80 ZIF M58BW-1
1 x BGA-0245/0242
1 x sandpaper for PS 13 Grit 400
1 x DIL40/QFP64 ZIF LPC-1
1 x Slot cutter 5.0mm
1 x Fluted filter for CW-matic
1 x DIL48/QFP100 ZIF MSP430-1
1 x BGA-Bottom-126
1 x DIL40/TSOP40 ZIF 18.4mm
1 x DIL28/TSOP28 ZIF 11,8mm Flash
1 x DIL18W/SOIC18 ZIF 300mil
1 x Core box bit 3.2mm
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x MICROMOT Mains Adapter NG 2/S
1 x DIL48/QFP100 ZIF MB90F-1
1 x Step clamps made of steel
1 x Cups brushes
1 x DIL16W/SOIC16 ZIF 300mil
1 x Four Jaw Chuck
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Diamond Twist Drills
1 x Combi cutter 6.5/2.5mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Diamond Grinding Bits 1,8mm
1 x Centre Turning Attachment
1 x TIP SPT-10
1 x Diamond blade for MBS 240/E
1 x Bottom PSOP44 NOR-3
1 x 10-piece wood router cutter set
1 x Diamond Grinding Bits 5mm
1 x Band knife of hardened spring band steel (without teeth)
1 x Diamond Cutting Discs
1 x Gear Chuck
1 x TIP SPT-2
1 x TIP SPT-3
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Diamond Cutting Discs
1 x Tungsten Carbide Tipped (TCT)
1 x Ball-shaped diamond coated 1.2mm
€5,354.03
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook