€12.67 + VAT

TOP-PIN 200ml
[1101412]

TOP-PIN 200ml

Long Term Protection of Precious Metal Contacts and Connectors.

  • TOP-PIN has been specially developed for preserving precious metal contacts.
  • It gently cleans lubricates and protects these micro-thin surfaces of contacts and connectors.
  • The high-quality synthetic active agents and inhibitors show remarkable lubricating and anti-corrosion properties, thus preventing abrasion and damaging of delicate precious metal layers and ruling out any corrosion of supporting base metals.
  • The protective film of TOP-PIN is stable, very thin, highly lubricating, and resistant to high heat

Application:

  • TOP-PIN is recommended for PCB gold fingers, computer interface connectors and guarantees a long-lasting preservation of operational reliability for contacts and connectors of all types.
  • The use of TOP-PIN is particularly recommended in high-quality electronic appliances and in the case of aggresive environments in workshops, industry, electronic motorcar equipment, EDP, telecommunications, aerospace and in the military sector.

Technical Data:

 

Colour: yellowish
Odour: that of solvents
Density: 0.67 g / cm³
Heat resistance (film): up to +300° C
Anit-corrosion protection:  4 cycles (DIN IEC 68)
Lubricating properties under pressure: excellent
Reviews
Manufacturers
1 x ESD Brushe
2 x Broca de alta duração de 2.5mm
1 x broca de alta duração de 0,6mm
4 x 3-jaw chuck centrically clamping 125mm
1 x Micro Compound Table KT 70
3 x Broca de alta duração de 2.8mm
1 x broca de alta duração de 0,2mm
1 x TU 2004V
1 x Side cutters 160mm
4 x Broca de alta duração de 2.9mm
1 x ACCENT SERVICE TOOLS SET
1 x Broca de alta duração de 2.2mm
2 x Edge cutter with pin 6.4mm
2 x Broca de alta duração de 2.4mm
4 x Milling cutter set (6 - 10mm)
4 x V-slot cutter 6.5mm
2 x Combi cutter 6.5/2.5mm
2 x Slot cutter 5.0mm
2 x Broca de alta duração de 0.9mm
1 x Footswitch FS
1 x Slot cutter 6.5mm
2 x Angle cutter 45 °
1 x lathe tools 10mm
1 x TU 2404
5 x Milling cutter set (2 - 5mm)
3 x Rounding over cutter 6.4mm
1 x lathe tools 12mm
2 x Broca de alta duração de 1.5mm
2 x OPTI BF20 VARIO
2 x Broca de alta duração de 1.0mm
3 x Turning inserts CCMT09T304
1 x Slot cutter 3.2mm
2 x Precision quick-action drill chuck 0-16mm B16
1 x Broca de alta duração de 2.3mm
2 x Broca de alta duração de 2.6mm
1 x surface planing and thicknessing ADH 200
2 x Broca de alta duração de 3.0mm
1 x TU 1503V
2 x EUROline-Conductive set of pliers
2 x Broca de alta duração de 2.0mm
3 x Precision quick-action drill chuck 0-8mm B16
1 x TORX-screwdrivers T20
1 x Broca de alta duração de 0.8mm
2 x Broca de alta duração de 1.4mm
1 x Broca de alta duração de 0.4mm
2 x Broca de alta duração de 1.2mm
2 x Turning inserts VCMT070204
1 x Broca de alta duração de 2.1mm
1 x Super-fine sanding discs grain 400
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Broca de alta duração de 0.5mm
2 x MICRO Miller MF 70
1 x Table Sawr TKS 315 E
2 x OPTI BF20L VARIO
2 x Broca de alta duração de 2.7mm
1 x 10-piece wood router cutter set
2 x HSS twist drill set with centring pin
1 x Cutting tool 16 mm
3 x Precision quick-action drill chuck 0-10mm B16
1 x Rebating cutter 6.4mm
1 x Core box bit 3.2mm
1 x Multipurpose Vices Primus 75
2 x FREEZER-TOP 200ml
1 x Broca de alta duração de 0.7mm
3 x Threading inserts 60º
1 x Broca de alta duração de 1.1mm
1 x Broca de alta duração de 0.3mm
2 x Half round cutter 13mm
2 x MICRO Miller FF 230
3 x Precision quick-action drill chuck 0-13mm B16
1 x Polishing machine PM 100
1 x BGA-Bottom-225
1 x BGA-Bottom-194
2 x Precision quick-action drill chuck 0-10mm B16
1 x BGA-Bottom-223
2 x Grinding and Polishing Machine SP/E
2 x BeeHive208S
1 x MULTI 200ml
2 x POLISHER 200ml
1 x BGA-Bottom-231
3 x DCMT070204
4 x Diamond Grinding Bits 5mm
1 x TOP-PIN 200ml
1 x Boring Bar for CCMT
1 x Morse taper MT2 - B16
1 x PLCC Extractor
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x SCREEN 200ml
3 x WCMT050308
2 x Insert LGTN-2
1 x Bottom PSOP44 NOR-1
1 x DCGT 070202F-AL
1 x CM2 - B16 - M10
3 x TCMT090204
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x Conjunto de três brocas de ponto
1 x Wire strippers 165mm
1 x Cutting tool 10 mm
2 x Threading inserts 60º
2 x Turning inserts WCMX050308F
4 x End mill for aluminium 3mm
2 x SCMT09T304
1 x HSS drill bits 1.2mm
1 x BGA-Bottom-216
1 x BGA-Bottom-115
1 x Diamond Grinding Bits 1,8mm
1 x 3-jaw chuck centrically clamping 80mm
1 x PRINTER 200ml
1 x Turning inserts SCMT09T304
1 x FREEZER-BR 200ml
1 x Professional set for finish grinding and polishing
2 x Collet chuck ER25 for D250X550
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x SPRAYOIL 200ml
1 x BIT-SET
2 x Diamond Grinding Bits 1,8mm
1 x BGA-Bottom-20
2 x TCMT110204
1 x BGA-Bottom-202
1 x TORX-screwdrivers T4
1 x BGA-Bottom-9
2 x SILICONE 200ml
1 x BGA-Bottom-229
1 x BGA-Bottom-101
1 x 3-jaw chuck centrically clamping 160mm
1 x BGA-Bottom-22
1 x Belt sander BBS/S
1 x BGA-Bottom-221
2 x Diamond Cutting Discs
1 x Diamond Cutting Discs
1 x BGA-Top-5 ZIF-CS
1 x BGA-Bottom-102
2 x Diamond Cutting Discs
1 x Insert CCGT060202-AK
1 x Lathe System PD 400
2 x Follow rest for D250X550
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x Safety Insulated Phillips Screwdriver 14-631VDE
1 x 6-piece screwdriver and cross-recess set
1 x HSS twist drill set to DIN 338
1 x End mill for aluminium 6mm
1 x BGA-Bottom-88
1 x BGA-Bottom-224
1 x VIDEOCLEAN 200ml
1 x BGA-Bottom-207
1 x Ball-shaped diamond coated 3.2mm
1 x BGA-Bottom-10
1 x BGA-Top-3 ZIF-CS
1 x HSS drill bits 0.5mm
1 x Broca de ponto 3.15 x 1.00
1 x Broca de ponto 3.15 x 1.25
1 x BGA-Bottom-125
1 x Digital caliper gauge 300 mm
1 x BGA-0245/0242
1 x BGA-Top-4 ZIF-CS
1 x Broca de ponto 8.00 x 3.15
1 x BGA-Bottom-218
1 x HSS drill bits 1.0mm
1 x HSS drill bits 0.8mm
3 x Ball-shaped diamond coated 2.2mm
1 x BGA-Bottom-8
1 x Polishing felt, medium hard
1 x BGA-Bottom-196
1 x BGA-Bottom-195
1 x VASELINE 200ml
1 x Boring Bar for DCMT 10mm
1 x sclcr2525M12
2 x Threading inserts 60º
2 x End mill for aluminium 4mm
1 x BeeHive204
2 x SCMT060204
1 x Ball-shaped diamond coated 1.2mm
1 x MICRO Miller FF 500
1 x DUSTER-BR 200ml
1 x HSS drill bits 1.6mm
1 x PLCC Puller
1 x BGA-Top-132 ZIF-CS
2 x Broca de ponto 5.00 x 2.00
1 x BGA-Bottom-215
1 x Lathe tools 10mm pastilhados
1 x Bottom PSOP44 NOR-2
2 x Lathe chuck flange for D250X550
1 x BGA-Bottom-208
1 x IC tweezers
1 x End milling cutter kit HSS 12 pcs
1 x Tungsten carbide cutters set
1 x Tungsten carbide drills Ø1,5mm
1 x SCLCR1010E06
1 x PROTECTION 200ml
1 x BGA-Bottom-108
1 x 3-jaw chuck centrically clamping 100mm
1 x BGA-0245/0241
1 x BGA-Bottom-5
2 x End milling cutter kit HSS 20 pcs
1 x BGA-Bottom-118
1 x BGA-Bottom-222
1 x 4-jaw chuck individually clamping 125mm
1 x machine base with shelves for D250X550
1 x Diamond Twist Drills
1 x BGA-Bottom-217
1 x quantum revolving center CM2
1 x Insert LGTN-3
1 x centrically clamping 125mm
1 x Diamond Cutting Discs
1 x Morse taper MT3 - B16
1 x BGA-Bottom-201
1 x BGA-Bottom-211
1 x ANTISTATIC 200ml
1 x BGA-Bottom-105
1 x BGA-0246/0243
1 x Precision magnetic gauge stand
1 x Inspector mirror
€48,764.15
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook