€3.27 + VAT

ANTISTATIC 200ml
[1331612]

ANTISTATIC 200ml

Neutralizes and Eliminates Static Electricity.

  • ANTISTATIC is a clear and safe agent that instantly eliminates static build-up caused by friction and low humidity conditions.
  • It prevents static electricity that can damage microelectronic components, semi-conductors and other high sensitive devices.
  • ANTISTATIC considerably and durably reduces the attraction of dust and dirt.
  • It eliminates electrostatic discharges that can lead to equipment failure and loss of stored data.
  • Its thin, invisible film is harmless to people and materials.
  • A test acc. DIN IEC 93 showed a reduction of surface resistance down to values below 109 ohm.

Application:

  • Data processing, electronic equipment, photographic processing equipment, computer housing and offices equipment.
  • Eliminates the attraction of dust and dirt on:
    • plastic parts
    • records
    • cabinets
    • floors
    • walls
    • ceilings
    • carpets
    • work surfaces
    • seat covers, etc.

Technical Data:

 

Colour: colourless
Density: 0.79 g / cm³
Drying: quick
Surface
resistance:(Polyethylene treated with Antistatik)
Reviews

Manufacturers
1 x Precision lathe PD 250/E
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Three piece thread cutting set
1 x Boring Bar for CCMT
1 x Boring Bar for CCMT 16mm
1 x SCLCR1010E06
1 x HSS boring tool set, 6 pieces
1 x Multiform grindstone
1 x Drill chuck with sliding sleeve for the tailstock
1 x Five piece HSS chisel set
1 x Boring Bar for CCMT 8mm
1 x Independent four jaw chuck for the DB 250
1 x Parting tool 10mm
1 x Replacement carving blades for MSG
1 x Lathe System PD 400
2 x Professional set for finish grinding and polishing
1 x EUROline side cutter rounded head
1 x Professional polishing sponge
1 x EUROline end cutter
1 x PLCC Extractor
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Band knife of hardened spring band steel (without teeth)
1 x Diamond blade
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Step clamps made of steel
1 x Replacement cutting disc for MICRO cutter MIC
1 x Disc Sander TG 125/E
1 x EUROline mini side cutter
1 x EUROline mini side cutter
1 x Crosscut 'Super-Cut' blade
1 x Aluminium Die-Cast
1 x Angle cutter 45 °
1 x Corundum grinding disc for LWS
1 x 14-piece parallel supports set
1 x Edge cutter with pin 6.4mm
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Replacement belts for BSL 220/E
1 x Spare cutting wire
1 x Core box bit 3.2mm
2 x Corundum fan sander for LWS
1 x Grinding mop cylinder grit 120
1 x Blade for Steel and brass
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Replacement belts for BSL 220/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Blade for Wood and Plastics
1 x Corundum sanding discs for LWS
1 x Belt sander BS/E
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x MICROMOT Mains Adapter NG 2/E
1 x V-slot cutter 6.5mm
1 x Jig saw STS 12/E
1 x Router base OFV
1 x Polishing machine PM 100
1 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 240
1 x Coarse-toothed (25 TPI per 25mm)
1 x Dividing attachment TA 230 for PF 250
2 x Cylinder sander WAS/E
2 x Footswitch FS
1 x Complete Engraving Kit with trial glass
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Super jig saw STS/E
2 x Tungstein carbide rasp - and cutting disc
1 x Saw blade made of high-alloy special steel
1 x Three-jaw steel drill chuck
1 x Corundum grinding disc for LWS
3 x Cutting tool HM 20 mm
1 x Cut off/mitre saw KGS 80
1 x 6-piece screwdriver and cross-recess set
1 x Screwdriver bit set. 49-piece.
1 x Protective device for hand-operated MICROMOT
1 x Table Saw FET
1 x EUROline mini side cutter
1 x EUROline round nose pliers
1 x Corundum sanding discs for LWS
1 x Blade guides separately
1 x Replacement belts for BSL 220/E
1 x Coarse-toothed (18 TPI per 25mm)
1 x Long neck angle grinder LHW
1 x Corundum bound cutting disc for LWS
1 x EUROline set of pliers
1 x Half round cutter 13mm
1 x EUROline snipe nose pliers
1 x MICRO cutter MIC
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x MICRO Heat gun MH 550
1 x Slot cutter 5.0mm
1 x Corundum fan sander for LWS
1 x Sanding fleece for LWS
1 x MICROMOT extension cord. 300cm.
1 x Precision steel vice PM 40
1 x Bench Circular Saw KS 230
1 x Supercut jig saw blades of special steel
1 x Grinding mop cylinder grit 80
1 x 6-piece screwdriver and cross-recess set
1 x PLCC Puller
1 x Jig saw blades made of HSS
1 x Diamond-coated cutting and roughing disc
1 x Flexishaft MICROMOT 110/BF
1 x MICROMOT steel collet set
1 x Super-fine sanding discs grain 400
1 x Pensander PS 13
1 x MICRO-screwdrivers
1 x OPTI BF20L VARIO
2 x centrically clamping 125mm
1 x 4-jaw chuck individually clamping 125mm
1 x OPTI BF16 Vario
1 x Wire strippers 165mm
1 x Follow rest for D250X550
1 x Telephone pliers straight 205mm
1 x Precision magnetic gauge stand
1 x Insulation Resistance Tester MG500
2 x quantum revolving center CM2
1 x DUSTER-BR 200ml
1 x DCMT070204
1 x lathe tools 10mm
1 x precision machine vices FMS100
2 x Precision quick-action drill chuck 0-13mm B16
1 x SCMT09T304
1 x precision machine vices FMS125
1 x centrically clamping 100mm
1 x Side cutters 160mm
1 x Cutter head for copy and surface milling MT3
1 x FLUX DISPENSING PEN, LEAD FREE
1 x Chuck for TBM 220
1 x Quick-action tool holder kit SWH AA
1 x Combination pliers 210mm
1 x Steady rest for D250X550
1 x Revolving center with replacement lathe centers
1 x Tool holder type H for SWH 1-A
1 x Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x TCMT110204
1 x Turning inserts SCMT09T304
1 x 4-jaw chuck individually clamping 80mm
1 x CM2 - B16 - M10
1 x Combination pliers 190mm
1 x Round nose pliers 165mm
1 x Threading inserts 60º
1 x 3-jaw chuck centrically clamping 125mm
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x 3-jaw chuck centrically clamping 80mm
1 x lathe tools 8mm
1 x Cutting tool 16 mm
1 x Insulation Resistance Tester MG125
1 x IT 200 - Indirect dividing attachment
1 x Morse taper MT2 - B16
1 x Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x SCMT060204
1 x Telephone pliers bent 205mm
1 x Cutter head for copy and surface milling MT2
1 x POLISHER 200ml
1 x Collet chuck ER25 for D250X550
€15,480.59
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook