Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Spare cutting wire
Replacement cutting wire for the THERMOCUT 12/E	Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Chuck for TBM 220
1 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Broca de alta duração de 2.7mm
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	ANTISTATIC 200ml
1 x	Independent four jaw chuck for the DB 250
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Table Sawr TKS 315 E
3 x	Earth wire
2 x	Backing disc for LWS
1 x	Broca de alta duração de 0.7mm
1 x	Sanding pads for OZI 220/E grit 240
2 x	Fixed Steady
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Blade for Steel and brass
1 x	Tungstein carbide rasp - and cutting disc
1 x	Broca de alta duração de 2.9mm
2 x	6-piece socket wrenches ESD
4 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Sanding pads for OZI 220/E grit 150
1 x	Lambswool polishing disc
3 x	Vacum SAA 901
1 x	Rounding over cutter 6.4mm
2 x	Broca de alta duração de 0.5mm
1 x	Replacement belts for BSL 220/E
2 x	Mini side cutters EUROline-Conductive
2 x	Centre Turning Attachment
3 x	V-slot cutter 6.5mm
1 x	Blade holders for DS 460
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	Angle cutter 45 °
1 x	Tungsten tipped saw blade
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Fluted filter for CW-matic
2 x	ESD Brushe
1 x	Saw blade made of high-alloy special steel
1 x	Diamond blade
2 x	Professional set for finish grinding and polishing
1 x	Tool holder for rotary tools
1 x	Fine dust paper filter for CW-matic
2 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	End side cutters EUROline-Conductive
3 x	Slot cutter 6.5mm
1 x	Sanding pads for OZI 220/E grit 80
2 x	Blade for Wood and Plastics
2 x	Core box bit 3.2mm
4 x	Mini side cutters EUROline-Conductive
1 x	Corundum sanding discs for LWS
2 x	6-piece TORX-screwdriver-set ESD
2 x	Radius Cutting Attachment, complete with pointed tool
3 x	Slot cutter 5.0mm
3 x	MICRO Miller FF 230
1 x	Four Jaw Chuck
3 x	Edge cutter with pin 6.4mm
3 x	Combi cutter 6.5/2.5mm
3 x	Half round cutter 13mm
2 x	Broca de alta duração de 0.3mm
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	sandpaper for PS 13 Grot 180
3 x	Crocodile clip
3 x	Flat nose pliers 45º EUROline-Conductive
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	precision machine vices FMS150
1 x	HSS immersion saw blades for OZI
1 x	Corundum bound cutting disc for LWS
1 x	Super-fine sanding discs grain 2000
1 x	sandpaper for PS 13 Grit 240
2 x	broca de alta duração de 0,2mm
1 x	Blade guides separately
2 x	Broca de alta duração de 0.4mm
1 x	Replacement belts for BSL 220/E
1 x	Multiform grindstone
1 x	Three jaw chuck for the lathe DB 250
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Insulation Resistance Tester MG125
1 x	Solid carbide saw blade
2 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	DIL8/SOIC8-1 ZIF 170mil
2 x	6-piece screwdriver set ESD
3 x	End side cutters 45º EUROline-Conductive
1 x	Broca de alta duração de 2.6mm
3 x	Round nose pliers 45º EUROline-Conductive
1 x	Microfibre cloth
1 x	Diamond blade for MBS 240/E
1 x	SCMT060204
4 x	Screwdriver 2.5
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICROMOT drill stand MB 200
1 x	Diamond Grinding Bits 5mm
2 x	Cups brushes
3 x	Wrench Keys 0.9
1 x	High quality corundum grinding bits
2 x	Safety Insulated Phillips Screwdriver 14-634VDE
2 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	Cross-recess Screwdrivers 1
2 x	Cutting tool 16 mm
2 x	Antiallergical Tweezers 5-125-1
2 x	PLCC Puller
3 x	EUROline mini side cutter
2 x	Footswitch FS
1 x	Top PSOP44 ZIF 600mil
2 x	Safety insulated screwdrivers 14-601 VDE
2 x	Stainless steel wheels
1 x	sanding belts for BBS/s Grit 80
1 x	Ball-shaped diamond coated 3.2mm
1 x	sanding belts for BBS/s Grit 240
1 x	RT200 - Horizontal-vertical circular dividing table
2 x	Screwdriver 2.5
3 x	Screwdriver 4.0
2 x	Stainless steel brushes
2 x	Safety insulated screwdrivers 14-602 VDE
1 x	Grinding mop cylinder grit 240
3 x	Screwdriver 1.5
2 x	Ceramic-tipped tweezers and ESD 5-096
1 x	EUROline-Conductive set of pliers
2 x	Wheels brushes
3 x	Steel brushes
2 x	TORX-screwdrivers T5
2 x	Cutting tool 10 mm
2 x	Cutting tool HM 20 mm
2 x	sanding belts for BBS/s Grit 150
2 x	Rebating cutter 6.4mm
4 x	Wrench Keys 2.0
1 x	Diamond Twist Drills
1 x	Flat nose pliers 185mm
1 x	Combination pliers 210mm
1 x	Sanding bands 14x13mm
2 x	Safety Insulated Phillips Screwdriver 14-632VDE
3 x	Lathe tools 8mm pastilhados
2 x	Steel wheels
2 x	Special Fused Alumina (Hardness N).
1 x	Protective device for hand-operated MICROMOT
1 x	TORX-screwdrivers T9
1 x	Wrench Keys 1.5
1 x	BGA-Bottom-88
4 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	TORX-screwdrivers T8
1 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	Screwdriver 5.5
1 x	IC Test clip 20 pins
3 x	EUROline flat nose pliers
3 x	Stainless steel cups
1 x	Precision caliper 500mm
1 x	Sanding Drums
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
2 x	Cross-recess Screwdrivers 0
1 x	Metal Cutting Blades
3 x	6-piece screwdriver and cross-recess set
2 x	lathe tools 8mm
3 x	Screwdriver 1.8
2 x	Cross-recess Screwdrivers Pozidriv 2
2 x	Screwdriver 2.0
2 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Fibre-Cut Discs
1 x	Sanding Drums
2 x	Cross-recess Screwdrivers 1
1 x	High quality corundum grinding bits
1 x	Diamond Grinding Bits 1,8mm
2 x	Conj 5 pinças ESD
1 x	Screwdriver 1.2
2 x	High quality corundum grinding bits
2 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Combination pliers 190mm
4 x	Wrench Keys 2.5
1 x	OPTI BF20 VARIO
2 x	Socket Wrenches 5.0
2 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1,5mm
2 x	Screwdriver 5.5
1 x	Fibre-Cut Discs
1 x	Earth wire with dummy Schunko-plug
1 x	Flap Wheels
2 x	Brass brushes
1 x	OPTI BF20L VARIO
1 x	IT 150 - Indirect dividing attachment
1 x	Cross-recess Screwdrivers 00
2 x	EUROline snipe nose pliers
1 x	Contact bracelet with spiral cord
1 x	Screwdriver 3.0
1 x	Grinding mop cylinder grit 80
1 x	Tungsten Carbide Tipped (TCT)
2 x	Diamond Cutting Discs
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	Dividing attachment TA 230 for PF 250
2 x	Pinça SOIC de 8 pinos
1 x	Cotton polishers
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	HSS drill bits 0.8mm
1 x	TOP-PIN 200ml
2 x	High quality corundum grinding bits
2 x	Screwdriver 0.8
1 x	Cutting tool 8 mm
2 x	Antiallergical Tweezers 5-121-1
2 x	Cross-recess Screwdrivers 2
1 x	Ball-shaped diamond coated 1.2mm
1 x	Socket Wrenches 3.5
2 x	Wrench Keys 0.7
1 x	Diamond Cutting Discs
2 x	Socket Wrenches 4.0
2 x	Wrench Keys 1.3
1 x	BIT-SET
1 x	Diamond-coated cutting disc for MIC
1 x	Combination pliers 205mm
1 x	Component tweezers 5-007
1 x	PROTECTION 200ml
1 x	Felt polishers
1 x	Broca de alta duração de 1.4mm
1 x	Ceramic tweezers 5-082
2 x	Screwdriver 2.5
1 x	Fibre-Cut Discs
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	Socket Wrenches 5.5
2 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
1 x	Socket Wrenches 4.5
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Cross-recess Screwdrivers 1
1 x	Fibre-Cut Discs
1 x	BeeHive204
1 x	HSS drill bits 1.2mm
1 x	TORX-screwdrivers T7
1 x	TORX-screwdrivers T4
1 x	precision machine vices FMS200
1 x	Combination pliers 185mm
1 x	Diamond Cutting Discs
2 x	Socket Wrenches 3.0
1 x	Screwdriver 2.0
2 x	PROLUB 200ml
3 x	EUROline side cutter pointed head
1 x	HSS drill bits 1.6mm
1 x	Sanding Drums
2 x	SPRAYOIL 200ml
1 x	14-piece parallel supports set
2 x	Screwdriver 3.0
1 x	Side cutters EUROline-Conductive
1 x	Tungsten carbide drills Ø2mm
1 x	lathe tools 10mm
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Grinding mop cylinder grit 120
2 x	Spare cutting wire
1 x	Crimping plier for BNC
1 x	TORX-screwdrivers T7
1 x	Cross-recess Screwdrivers 00
1 x	HSS twist drill set with centring pin
1 x	OPTI BF16 Vario
1 x	Hand Magnifier 2-293
1 x	Grinding mop cylinder grit 120
2 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	surface planing and thicknessing ADH 250
2 x	6-piece screwdriver and cross-recess set
1 x	MULTI 200ml
1 x	Fibre-Cut Discs
1 x	Super-fine sanding discs grain 000
1 x	Steel cups
1 x	Super-Cut
1 x	Diamond Grinding Bits 1,8mm
1 x	High quality corundum grinding bits
1 x	Socket Wrenches 3.2
2 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Sanding Discs
1 x	Side cutters 160mm
1 x	Inpection mirror 1-978
1 x	Lever Dial Indicator
1 x	Table Saw TKS 2500 SC
2 x	Precision drill grinder FBS 12/EF
1 x	ESD Brushe
1 x	TIP SPT-4
2 x	TIP SPT-3
1 x	TIP SPT-2
1 x	Super-fine sanding discs grain 400
2 x	Broca de alta duração de 1.5mm
1 x	MICROMOT 230/E
1 x	Side cutters 170mm
1 x	Tweezer teflon-coated 5-107-9
1 x	6-piece TORX-screwdriver-set
2 x	Mill/Drill System BFW 40/E
1 x	Multipurpose Vices Primus 75
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Earth wire
2 x	Milling cutter set (2 - 5mm)
1 x	Milling cutter set (6 - 10mm)
1 x	6-piece screwdriver and cross-recess set
2 x	MICROMOT 50
1 x	Belt sander BBS/S
2 x	EUROline mini side cutter
1 x	MICRO Miller FF 500
2 x	Precision Vice FMZ
1 x	SMD Tweezers 5-052
1 x	SMD Tweezers 5-054
2 x	SMD Tweezers 5-062
1 x	Boring Bar for CCMT 16mm
1 x	ESD-handling set
2 x	ESD Tweezers 5-193
1 x	Insert CCGT060202-AK
1 x	MICROMOT 50/E
1 x	TORX-screwdrivers T6
1 x	Boring Bar for CCMT 8mm
1 x	ESD Tweezers 5-195
1 x	MICROMOT 50/EF
1 x	Digital caliper gauge 300 mm
2 x	magnetic base 80kg
1 x	Broca de alta duração de 2.0mm
2 x	PLCC Extractor
1 x	IC tweezers
1 x	IT 200 - Indirect dividing attachment
1 x	SMD Tweezers 5-075
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Bench drill machine TBM 220
1 x	Brass contact cleaner brush
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	MICRO Miller MF 70
1 x	EUROline set of pliers
1 x	TORX-screwdrivers T10
1 x	Glass fibre contact cleaner brush
1 x	TORX-screwdrivers T10
1 x	Precision magnetic gauge stand
1 x	SMD Tweezers 5-051
1 x	POLISHER 200ml
2 x	ESD Tweezers 5-192
1 x	Machine Vice MS 4
2 x	SMD Tweezers 5-061
1 x	TORX-screwdrivers T6
1 x	Long neck straight drill/grinder LB/E
1 x	TORX-screwdrivers T20
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Ceramic tweezers 5-081
1 x	Precision Drill/Grinder FBS 240/E
1 x	ESD Tweezers 5-194

€29,616.65