Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Ball-shaped diamond coated 2.2mm
2 x Diamond Cutting Discs
1 x Diamond-coated cutting and roughing disc
1 x Tungstein carbide rasp - and cutting disc
1 x Brass brushes
1 x Backing disc for LWS
2 x Blade holders for DS 460
2 x Fibre-Cut Discs
1 x Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x sanding belts for BBS/s Grit 240
1 x Cylinder sander WAS/E
1 x Micro Compound Table KT 70
1 x sandpaper for PS 13 Grit 240
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Safety Insulated Phillips Screwdriver 14-634VDE
3 x Crimping plier for BNC
1 x Fibre-Cut Discs
1 x Stainless steel brushes
3 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x sanding belts for BBS/s Grit 150
1 x Super-fine sanding discs grain 400
1 x Coarse-toothed (10 TPI per 25mm)
1 x Insulation Resistance Tester MG125
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Safety Insulated Phillips Screwdriver 14-631VDE
2 x CRIMPING PLIERS/WIRE STRIPPER
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Ball-shaped diamond coated 1.2mm
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Grinding mop cylinder grit 80
2 x Professional set for finish grinding and polishing
2 x Replacement carving blades for MSG
1 x sandpaper for PS 13 Grot 180
2 x Super-fine sanding discs grain 000
1 x PLCC Puller
1 x Microfibre cloth
1 x Professional polishing sponge
2 x Diamond Cutting Discs
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Diamond Grinding Bits 1,8mm
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Fibre-Cut Discs
1 x Steel brushes
1 x Milling cutter set (6 - 10mm)
2 x Diamond Cutting Discs
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x Super-fine sanding discs grain 2000
1 x Diamond Grinding Bits 1,8mm
1 x Diamond Cutting Discs
1 x Fibre-Cut Discs
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x MICRO Miller FF 230
1 x Grinding mop cylinder grit 120
3 x Fibre-Cut Discs
1 x Ball-shaped diamond coated 3.2mm
1 x Inpection mirror 1-978
1 x Coarse-toothed (25 TPI per 25mm)
1 x Inspector mirror
1 x Diamond Twist Drills
1 x Polishing felt, medium hard
1 x BIT-SET
1 x IC tweezers
1 x Diamond Grinding Bits 5mm
1 x Replacement cutting disc for MICRO cutter MIC
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Steel cups
1 x Diamond-coated cutting disc for MIC
1 x Safety Insulated Phillips Screwdriver 14-633VDE
1 x MICROMOT Mains Adapter NG 2/S
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x MICROMOT Mains Adapter NG 5/E
1 x Coarse-toothed (18 TPI per 25mm)
1 x Insulation Resistance Tester MG500
1 x Diamond Grinding Bits 1mm
1 x Multiform grindstone
1 x sanding belts for BBS/s Grit 80
1 x Dividing attachment TA 230 for PF 250
1 x Professional Drill/Grinder IBS/E
1 x Broca de alta duração de 1.3mm
1 x Broca de ponto 5.00 x 2.00
1 x Delta sander OZI/E
1 x Flexible polishing pad set
1 x Cut off/mitre saw KGS 80
1 x MICRO shaper MP 400
1 x Broca de alta duração de 1.0mm
1 x Felt polishers
1 x Bench drill press TBH
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Magnetic base
1 x Digital caliper gauge 300 mm
1 x Scroll saw DS 230/E
1 x Precision magnetic gauge stand
€4,446.03
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online