€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	TIP SPT-2
1 x	TIP SPT-4
3 x	EUROline snipe nose pliers
1 x	3-jaw chuck centrically clamping 80mm
1 x	TORX-screwdrivers T9
1 x	High quality corundum grinding bits
3 x	VIDEOCLEAN 200ml
1 x	CM2 - B16 - M10
1 x	3-jaw chuck centrically clamping 100mm
1 x	CD-CLEANER 200ml
2 x	TUNER 200ml
1 x	4-jaw chuck individually clamping 80mm
2 x	6-piece screwdriver set ESD
1 x	High quality corundum grinding bits
1 x	Morse taper MT3 - B16
1 x	High quality corundum grinding bits
2 x	MICROMOT 50
1 x	Cotton polishers
1 x	3-jaw chuck centrically clamping 160mm
1 x	High quality corundum grinding bits
1 x	Set of precision cutters
2 x	6-piece socket wrenches ESD
1 x	Insulation Resistance Tester MG500
1 x	ESD Brushe
1 x	Insulation Resistance Tester MG125
2 x	MICRO Miller FF 230
1 x	Cylinder sander WAS/E
1 x	Wolfram vanadium steel milling bits
1 x	Grinding mop cylinder grit 120
1 x	Hot wire cutter THERMOCUT 650
1 x	DEGRESER 200ml
2 x	EUROline top cutter
1 x	Fibre-Cut Discs
2 x	ESD Brushe
2 x	Cylinder shaped milling cutters
1 x	Tungsten carbide cutters set
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	MICRO Miller FF 500
1 x	Grinding mop cylinder grit 80
1 x	Router base OFV
1 x	Table Sawr TKS 315 E
1 x	Super-fine sanding discs grain 000
1 x	Solid carbide stylus for engraving
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Solid carbide stylus for engraving
1 x	High quality corundum grinding bits
1 x	Diamond-coated cutting and roughing disc
1 x	Tungsten carbide cutter 3.0mm
1 x	High quality corundum grinding bits
1 x	Dial gauge
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Grinding mop cylinder grit 240
1 x	Tungstein carbide rasp - and cutting disc
1 x	Milling cutter set (2 - 5mm)
1 x	Disc cutters
1 x	MICRO Miller MF 70
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Precision magnetic gauge stand
1 x	FLUX-OFF 400ml
1 x	Turning inserts CCMT09T304
1 x	Wrench Keys 1.5
1 x	Cross-recess Screwdrivers 0
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	TU 2404
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Threading inserts 60º
1 x	Replacement carving blades for MSG
1 x	Hand Magnifier 2-293
1 x	Telephone pliers straight 205mm
1 x	Steel brushes
1 x	Tweezer teflon-coated 5-021-9
1 x	Insert CCGT060202-AK
1 x	Centre Turning Attachment
1 x	Cylindrical cutters
1 x	Tungsten carbide drills Ø2mm
1 x	Steel tape measure
1 x	SCMT060204
1 x	Tweezer teflon-coated 5-117-9
1 x	Precision Vice FMZ
1 x	TORX-screwdrivers T7
1 x	Sanding Drums
1 x	Screwdriver 2.0
2 x	Screwdriver 2.5
1 x	BGA-0246/0244
1 x	6-piece wrench key set ESD
1 x	Cross-recess Screwdrivers 00
1 x	Flap Wheels
1 x	Precision steel vice PM 40
1 x	Felt polishers
1 x	Cutter head for copy and surface milling MT2
1 x	IC Test clip 20 pins
1 x	DCMT070204
1 x	SMD Tweezers 5-075
1 x	EUROline mini side cutter
1 x	EUROline round nose pliers
1 x	Cotton polishers
1 x	Glass fibre contact cleaner brush
1 x	Steel cups
1 x	Cross-recess Screwdrivers 000
1 x	Stainless steel brushes
1 x	Stainless steel wheels
1 x	Inpection mirror 1-978
1 x	Insert LGTN-3
1 x	Boring Bar for CCMT 8mm
1 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 5.5
1 x	TCMT090204
1 x	TCMT110204
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Diamond Cutting Discs
1 x	sclcr2525M12
1 x	Lathe chuck flange for D250X550
1 x	Screwdriver 1.5
1 x	Diamond Grinding Bits 1mm
1 x	Wire strippers 165mm
1 x	SMD Tweezers 5-071
1 x	Threading inserts 60º
1 x	Combination pliers 185mm
1 x	Earth wire with dummy Schunko-plug
1 x	BGA-Bottom-108
1 x	Steel wheels
1 x	Sanding bands 14x13mm
1 x	Table Saw TKS 2500 SC
1 x	Turning inserts CCMT060204

€12,522.56