€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	6-piece set of ESD/EGB tweezers
1 x	Tweezer teflon-coated 5-107-9
1 x	Telephone pliers bent 205mm
1 x	Earth wire with dummy Schunko-plug
2 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Combination pliers 185mm
1 x	Telephon pliers bent 200mm
1 x	Round nose pliers 165mm
2 x	BIT-SET
1 x	Side cutters 160mm
2 x	Warding files set, 6pcs
3 x	EUROline-Conductive set of pliers
1 x	Plastic magnifying glass
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	ESD Tweezers 5-191
1 x	Cross-recess Screwdrivers 000
1 x	Flat nose pliers 160mm
1 x	SMD Tweezers 5-075
1 x	ESD Brushe
2 x	ESD Tweezers 5-192
1 x	6-piece socket wrenches ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	ESD Tweezers 5-193
1 x	Component tweezers 5-009
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	End side cutters 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 2
2 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Round nose pliers 160mm
1 x	Earth wire
1 x	6-piece TORX-screwdriver-set ESD
1 x	Antiallergical Tweezers 5-107-1
1 x	Component tweezers 5-013
1 x	Earthing module
1 x	SMD Tweezers 5-071
1 x	Tweezer teflon-coated 5-117-9
1 x	ESD Brushe
1 x	Telephon pliers straight 200mm
1 x	End side cutters EUROline-Conductive
1 x	SMD Tweezers 5-062
1 x	Antiallergical Tweezers 5-121-1
1 x	Component tweezers 5-006
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	SMD Tweezers 5-052
1 x	6-piece screwdriver set ESD
1 x	Combination pliers 160mm
1 x	Antiallergical Tweezers 5-117-1
1 x	ACCENT SERVICE TOOLS SET
1 x	Mini side cutters EUROline-Conductive
1 x	Cross-recess Screwdrivers 1
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 2
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Wire strippers 160mm
1 x	ESD Tweezers 5-195
1 x	Combination pliers 210mm
1 x	Component tweezers 5-008
1 x	Cross-recess Screwdrivers 1
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	ESD Tweezers 5-194
1 x	SMD Tweezers 5-058
1 x	Telephon pliers bent 160mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Broca de alta duração de 1.1mm
1 x	BGA-Bottom-101
1 x	BGA-Bottom-111
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 2.0mm
1 x	Table Sawr TKS 315 E
1 x	BGA-Bottom-115
1 x	Compact workshop vacuum cleaner CW-matic
1 x	BGA-Bottom-103
1 x	BGA-0246/0244
2 x	Inspector mirror
1 x	Broca de alta duração de 1.2mm
1 x	Broca de alta duração de 2.3mm
1 x	End mill for aluminium 3mm
1 x	Broca de alta duração de 1.5mm
1 x	BGA-Bottom-106
1 x	Inpection mirror 1-978
1 x	BGA-Bottom-11
1 x	MICRO-screwdrivers
1 x	SmartProg2
1 x	Wood Lathe DB450
1 x	BGA-0245/0243
1 x	BGA-0245/0241
1 x	BeeProg2
1 x	Universal holder UHZ
1 x	Broca de alta duração de 1.3mm
1 x	Broca de alta duração de 0.8mm

€6,667.30