€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Three jaw chuck for the lathe DB 250
1 x	Rounding over cutter 6.4mm
1 x	MICRO-screwdrivers
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Flap Wheels
1 x	TIP SPT-2
1 x	Diamond-coated cutting disc for MIC
2 x	Engraving tool GG
1 x	HSS boring tool set, 6 pieces
1 x	Diamond Cutting Discs
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Diamond cutting blade for OZI
1 x	V-slot cutter 6.5mm
3 x	Centre Turning Attachment
1 x	Tungsten Carbide Tipped (TCT)
1 x	Dividing attachment TA 230 for PF 250
2 x	TIP SPT-3
1 x	Rebating cutter 6.4mm
2 x	Step clamps made of steel
1 x	HSS twist drill set with centring pin
1 x	Combi cutter 6.5/2.5mm
1 x	MICROMOT glue gun HKP 220
1 x	Independent four jaw chuck for the DB 250
1 x	Disc Sander TG 125/E
1 x	Slot cutter 5.0mm
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	MICROFLAM gas soldering set MGS
1 x	Core box bit 3.2mm
1 x	MICROMOT extension cord. 300cm.
1 x	High quality corundum grinding bits
1 x	Disc cutters
1 x	Corundum bound cutting disc for LWS
2 x	Screwdriver bit set. 49-piece.
1 x	Super-fine sanding discs grain 000
1 x	MICROMOT 50/E
2 x	Fibre-Cut Discs
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	High quality corundum grinding bits
1 x	Fixed Steady
1 x	Aluminium Die-Cast
1 x	Replacement belts for BSL 220/E
1 x	High quality corundum grinding bits
2 x	Fibre-Cut Discs
1 x	Router base OFV
2 x	Multipurpose Vices Primus 75
1 x	Tool holder for rotary tools
1 x	Sanding Drums
1 x	Edge cutter with pin 6.4mm
3 x
1 x	Diamond Cutting Discs
1 x	Supercut jig saw blades of special steel
2 x	BeeHive208S
1 x	Bench drill press TBH
1 x	MICRO Heat gun MH 550
1 x	Disc Sander TG 250/E
1 x	Sanding bands 14x13mm
1 x	Lathe System PD 400
1 x	Fibre-Cut Discs
1 x	6-piece TORX-screwdriver-set
1 x	Super safety and specialty bit set, 75-piece
1 x	Wolfram vanadium steel milling bits
1 x	10-piece wood router cutter set
2 x	TIP SPT-9
2 x	MICRO Miller FF 230
1 x	Polishing machine PM 100
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Tungsten carbide cutters set
1 x	Universal holder UHZ
1 x	Five piece HSS chisel set
1 x	Flame shaped milling cutters
1 x	Four Jaw Chuck
1 x	Grinding mop cylinder grit 240
1 x	HSS twist drill set to DIN 338
1 x	BGA-0245/0241
1 x	HSS drill bits 0.5mm
1 x	Metal Cutting Blades
1 x	Pensander PS 13
1 x	Precision Vice FMS 75
1 x	Tungsten carbide drills Ø1mm
1 x	TIP SPT-4
1 x	Sanding Drums
1 x	MICRO cutter MIC
1 x	BGA-Bottom-1
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Precision Vice FMZ
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Machine Vice MS 4
1 x	Fibre-Cut Discs
1 x	BGA-0245/0243
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICRO Miller FF 500
1 x	Diamond Twist Drills
1 x	Mill/Drill System BFW 40/E
1 x	Replacement belts for BSL 220/E
1 x	Precision lathe PD 250/E
1 x	Wolfram vanadium steel milling bits
1 x	Flexishaft MICROMOT 110/P
1 x	Flexishaft MICROMOT 110/BF
1 x	Mill/Drill Unit BFB 2000.
1 x	BGA-0245/0242
1 x	HSS drill bits 0.8mm
1 x	Felt polishers
1 x	MICRO Miller MF 70
1 x	Long neck angle grinder LHW
1 x	Glass fibre contact cleaner brush
2 x	Fine dust paper filter for CW-matic
1 x	Precision steel vice PM 40
1 x	Universal polishing paste
1 x	Felt polishers
1 x	Three piece thread cutting set
1 x	BGA-Bottom-118
1 x	Table Saw FET
1 x	Sanding Drums

€26,176.05