€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Inspector mirror
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Flexible silicon discs
2 x	MICRO Miller FF 230
1 x	High quality corundum grinding bits
1 x	Steady rest for D250X550
1 x	surface planing and thicknessing ADH 200
1 x	Flexible polishing pad set
1 x	Fluted filter for CW-matic
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Titan Tweezers 5-031
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Morse taper MT2 - B16
1 x	Vacum SAA 901
1 x	quantum revolving center CM2
1 x	Broca de alta duração de 2.9mm
1 x	Quick-action tool holder kit SWH AA
1 x	Diamond Cutting Discs
1 x	Flexible silicon discs
1 x	Broca de alta duração de 2.6mm
2 x	Wood Lathe DB900
1 x	TU 1503V
1 x	Titan Tweezers 5-035
1 x	machine base with shelves for D250X550
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
1 x	Tweezer teflon-coated 5-107-9
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	OPTI BF16 Vario
1 x	BeeHive204
1 x	ESD-handling set
1 x	Wire strippers 160mm
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	ACCENT SERVICE TOOLS SET
1 x	TIP SPT-10
1 x	Wire strippers 160mm
1 x	Side cutters 195mm
1 x	ESD-handling ser 9-361
1 x	PLCC Extractor
1 x	Combination pliers 160mm
1 x	PLCC Puller
1 x	Side cutters 160mm
1 x	Round nose pliers 160mm
1 x	Lathe System PD 400
1 x	Lever Dial Indicator
1 x	EUROline-Conductive set of pliers
1 x	BGA-0246/0243
1 x	Digital caliper gauge 300 mm
1 x	BGA-0245/0241
1 x	Precision caliper 500mm

€13,956.04