€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Revolving center with replacement lathe centers
1 x	Broca de alta duração de 2.6mm
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 2.1mm
1 x	broca de alta duração de 0,6mm
1 x	6-piece screwdriver and cross-recess set
1 x	Broca de alta duração de 2.3mm
2 x	Broca de alta duração de 3.0mm
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 1.4mm
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	broca de alta duração de 0,2mm
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
2 x	6-piece screwdriver and cross-recess set
1 x	Broca de alta duração de 2.7mm
1 x	Broca de alta duração de 1.3mm
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Broca de alta duração de 2.8mm
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 3.2mm
1 x	Bench drill press TBH
1 x	Precision Drill/Grinder FBS 240/E
1 x	Felt polishers
3 x	Diamond Grinding Bits 1,8mm
1 x	Morse taper MT2 - B16
1 x	Cups brushes
1 x	MICRO Miller FF 230
1 x	Screwdriver 2.5
1 x	Universal and oil siphoning pump AP 12
1 x	MICRO woodturning lathe DB 250
1 x	Screwdriver 1.0
1 x	Diamond Twist Drills
1 x	Diamond Grinding Bits 1,8mm
1 x	MICROMOT 50/E
2 x	Super jig saw STS/E
1 x	Surface planer AH 80
1 x	2-speed scroll saw DSH
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Felt polishers
1 x	Thicknesser DH 40
1 x	Bench Circular Saw KS 230
1 x	BGA-Bottom-103
1 x	6pcs Double Open End wrench set
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	TORX-screwdrivers T7

€3,424.46