€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Jig saw STS 12/E
1 x	2-speed scroll saw DSH
2 x	Wood Lathe DB450
1 x	Titan Tweezers 5-035
1 x	SMD Tweezers 5-052
1 x	MICRO shaper MP 400
1 x	Mini side cutters EUROline-Conductive
1 x	Inpection mirror 1-978
1 x	TORX-screwdrivers T4
1 x	End side cutters EUROline-Conductive
1 x	MICRO Band Saw MBS 240/E
2 x	Side cutters EUROline-Conductive
1 x	Contact bracelet with spiral cord
2 x	Earth wire
1 x	Cross-recess Screwdrivers 1
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Screwdriver 1.5
1 x	Earth wire with dummy Schunko-plug
1 x	Broca de alta duração de 2.4mm
1 x	Combination pliers 190mm
1 x	Earthing module
1 x	6-piece screwdriver and cross-recess set ESD
3 x	Floor cover ESD
1 x	RT100 - Horizontal-vertical circular dividing table
2 x	Round nose pliers 45º EUROline-Conductive
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	IT 150 - Indirect dividing attachment
1 x	Handy 1515
1 x	Screwdriver 1.8
1 x	Screwdriver 2.5
1 x	Cross-recess Screwdrivers 2
1 x	RT200 - Horizontal-vertical circular dividing table
1 x	Super safety and specialty bit set, 75-piece
1 x	ACCENT SERVICE TOOLS SET
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Combination pliers 210mm
1 x	Wood Lathe DB900
1 x	6-piece screwdriver set ESD
1 x	Cutter head for copy and surface milling MT3
1 x	OPTI BF20L VARIO
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 00
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
2 x	Flat nose pliers 45º EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	End side cutters 45º EUROline-Conductive
1 x	IT 200 - Indirect dividing attachment
1 x	6-piece socket wrenches ESD
1 x	TORX-screwdrivers T7
1 x	Broca de alta duração de 2.6mm
1 x	6-piece TORX-screwdriver-set ESD
1 x	Screwdriver 1.2
1 x	broca de alta duração de 0,2mm
1 x	Screwdriver 4.0
1 x	Screwdriver 5.5
1 x	TORX-screwdrivers T8
2 x	Crocodile clip
1 x	ESD-handling ser 9-361
1 x	ESD-handling set
1 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 3.0
2 x	Earth wire
2 x	Vacum SAA 901
2 x	Mini side cutters EUROline-Conductive
1 x	Screwdriver 0.8
1 x	Broca de alta duração de 2.9mm
1 x	Screwdriver 2.0
1 x	ESD Brushe
1 x	TORX-screwdrivers T6
1 x	TIP SPT-6
1 x	BGA-Bottom-10
1 x	BGA-0245/0242

€8,905.47