€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Torno de bancada para madeira DB450
2 x	Collet Set for accurate use on round components
1 x	MICRO Miller FF 230
1 x	Aspirador SAA 901
1 x	Lamina super-cut
1 x	Lâmina de imersão em HSS para OZI
2 x	Fresa de facejar MT2
1 x	Lâmina diamantada
1 x	Laminas sem pinos 17TPI
2 x	Equipamento de corte radial para tornos mecânicos
1 x	Extractor PLCC simples
1 x	Chave sextavada exterior 3.2
2 x	Suporte para mini berbequins.
1 x	Chave sextavada exterior 5.5
1 x	Base de bacada ESD 9-361
1 x	Folhas de lixa para OZI 220/E Grão 80
1 x	Cortador fio térmico THERMOCUT 650
1 x	Extractor PLCC
1 x	Boina de Polir em Musselina branqueada
1 x	Cintas de lixa grão 180 para BSL220/E
1 x	Cintas de lixa grão 120 para BSL220/E
1 x	MICRO Miller MF 70
1 x	Cortador de fio térmico THERMOCUT 230/E
1 x	Laminas sem pinos 36TPI
1 x	Transformador NG 2/E 12V-2A
1 x	Bucha de 3 garras autocentrantes para DB 250
1 x	Bucha de 4 garras independentes para DB 250
1 x	Folhas de lixa para OZI 220/E Grão 240
1 x	OPTI BF20 VARIO
1 x	Transformador NG 5/E 12V-5A
1 x	OPTI BF16 Vario
1 x	Boina de Polir em Microfibra
2 x	Centre Turning Attachment
1 x	MICRO Miller FF 500
1 x	Disco de corte em HSS para OZI
1 x	Lâmina em espiral 130mm pontas planas sem pinos
1 x	Gear Chuck
1 x	Disco de corte diamantado
1 x	Torno de bancada para madeira DB900
1 x	Lâminas com pinos 10 TPI
1 x	Fixed Steady
1 x	Fresa de facejar MT3
1 x	Lâminas com pinos 25 TPI
1 x	Chave sextavada exterior 4.0

€9,122.91