€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Conj 5 pinças ESD
1 x	Hand magnifier with LED light 3X
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Professional set for finish grinding and polishing
2 x	Replacement belts for BSL 220/E
2 x	Bench drill machine TBM 220
1 x	Polishing felt, medium hard
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Flexible polishing pad set
1 x	sanding belts for BBS/s Grit 240
3 x	Backing disc for LWS
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Half round cutter 13mm
2 x	Spare cutting wire
1 x	Belt sander BS/E
1 x	Cylinder sander WAS/E
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Super-fine sanding discs grain 2000
1 x	BGA-Bottom-111
1 x	Aluminium Die-Cast
1 x	Diamond blade
2 x	Micro Compound Table KT 70
2 x	Corundum fan sander for LWS
1 x	BGA-Bottom-115
1 x	Ball-shaped diamond coated 1.2mm
1 x	Crosscut 'Super-Cut' blade
3 x	Replacement cutting disc for MICRO cutter MIC
1 x	Fibre-Cut Discs
1 x	MICRO Miller FF 500
1 x	BGA-Bottom-103
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	V-slot cutter 6.5mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Corundum sanding discs for LWS
1 x	Replacement glue sticks for HKP 220
3 x	Core box bit 3.2mm
1 x	BGA-Bottom-11
2 x	Replacement belts for BSL 220/E
2 x	Corundum grinding disc for LWS
1 x	Professional Drill/Grinder IBS/E
1 x	Beeprog2C
1 x	Corundum grinding disc for LWS
1 x	Lambswool polishing disc
2 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Rebating cutter 6.4mm
1 x	BGA-Bottom-105
1 x	BGA-Bottom-10
2 x	10-piece wood router cutter set
2 x	Blade for Wood and Plastics
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Universal and oil siphoning pump AP 12
1 x	14-piece parallel supports set
2 x	Professional polishing sponge
1 x	sanding belts for BBS/s Grit 80
1 x	6pcs Double Open End wrench set
1 x	Microfibre cloth
1 x	Gear Chuck
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	HSS twist drill set with centring pin
1 x	Collet Set for accurate use on round components
1 x	Replacement carving blades for MSG
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Three-jaw steel drill chuck
1 x	Tool holder for rotary tools
2 x
1 x	2-speed scroll saw DSH
1 x	Sanding fleece for LWS
1 x	Router base OFV
1 x	Cups brushes
2 x	MICRO Miller FF 230
2 x	Band knife of hardened spring band steel (without teeth)
1 x	High quality corundum grinding bits
1 x	BeeHive208S
1 x	High quality corundum grinding bits
1 x	MICROMOT tool holder
1 x	BGA-Bottom-106
1 x	Cutting disc, with reinforcement
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Corundum bound cutting disc for LWS
2 x	Blade guides separately
2 x	Replacement belts for BSL 220/E
1 x	Footswitch FS
1 x	High quality corundum grinding bits
2 x	Blade for Steel and brass
1 x	Flexishaft MICROMOT 110/BF
1 x	Sanding fleece for LWS
1 x	Super-fine sanding discs grain 400
1 x	Rounding over cutter 6.4mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Four Jaw Chuck
1 x	Cotton polishers
3 x	Bench drill press TBH
1 x	Milling cutter set (2 - 5mm)
1 x	sanding belts for BBS/s Grit 150
1 x	Warding files set, 6pcs
1 x	Chuck for TBM 220
1 x	Slot cutter 6.5mm
1 x	MICROMOT extension cord. 300cm.
1 x	Angle cutter 45 °
1 x	MICROMOT 50/EF
1 x	HSS boring tool set, 6 pieces
1 x	Grinding mop cylinder grit 120
1 x	Replacement belts for BSL 220/E
1 x	Three jaw chuck for the lathe DB 250
1 x	MICRO Miller MF 70
1 x	Diamond Coated
1 x	Ball-shaped diamond coated 3.2mm
1 x	Super-fine sanding discs grain 000
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Milling cutter set (6 - 10mm)
1 x	Centre Turning Attachment
1 x	MICROFLAM gas soldering set MGS
1 x	Self-adhesive white corundum sanding discs for TG 125/E

€17,282.93