€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Mini side cutters EUROline-Conductive
1 x	Cylinder sander WAS/E
1 x	BGA-Bottom-108
1 x	Mini side cutters EUROline-Conductive
1 x	Flexible silicon discs
1 x	Felt polishers
2 x	High quality corundum grinding bits
1 x	Broca de ponto 8.00 x 3.15
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Lathe tools 10mm pastilhados
1 x	BGA-Bottom-102
1 x	BGA-Bottom-106
1 x	Disc Sander TG 125/E
1 x	Core box bit 3.2mm
1 x	Side cutters EUROline-Conductive
1 x	BGA-0245/0241
2 x	Crosscut 'Super-Cut' blade
1 x	Flexible silicon discs
1 x	Steady rest for D250X550
1 x	BGA-Bottom-115
1 x	Boring Bar for CCMT 8mm
1 x	Delta sander OZI/E
1 x	BeeHive204
1 x	Independent four jaw chuck for the DB 250
1 x	centrically clamping 125mm
1 x	Diamond Grinding Bits 5mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Corundum grinding disc for LWS
1 x	Fibre-Cut Discs
1 x	quantum revolving center CM1
1 x	Ball-shaped diamond coated 3.2mm
1 x	MICRO shaper MP 400
1 x	High quality corundum grinding bits
1 x	Corundum grinding disc for LWS
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Flap Wheels
1 x	SCLCR1010E06
1 x	quantum revolving center CM2
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	Grinding mop cylinder grit 80
1 x	Collet Set for accurate use on round components
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BeeHive208S
1 x	Cotton polishers
1 x	Grinding mop cylinder grit 240
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	BGA-Bottom-111
1 x	Sanding Discs
1 x	Tungsten tipped saw blade
1 x	Quick-action tool holder kit SWH AA
1 x	Titan Tweezers 5-037
1 x	Precision Vice FMS 75
1 x	High quality corundum grinding bits
2 x	Half round cutter 13mm
1 x	Bench drill press TBH
1 x	BGA-Bottom-118
1 x	MICROMOT Mains Adapter NG 2/E
1 x	BGA-Bottom-125
1 x	BGA-0246/0244
1 x	10-piece wood router cutter set
1 x	Multipurpose Vices Primus 75
1 x	sanding belts for BBS/s Grit 80
1 x	Angle cutter 45 °
1 x	Polishing machine PM 100
1 x	Cylinder shaped milling cutters
1 x	sanding belts for BBS/s Grit 240
1 x	Wolfram vanadium steel milling bits
1 x	lathe tools 10mm
1 x	Parting tool 10mm
1 x	Universal holder UHZ
1 x	Table Saw FET
2 x	Slot cutter 6.5mm
1 x	BGA-Bottom-1
1 x	Belt sander BBS/S
1 x	Professional set for finish grinding and polishing
1 x	MICRO Band Saw MBS 240/E
1 x	Wrench Keys 0.9
1 x	Backing disc for LWS
1 x	14-piece parallel supports set
1 x	Cotton polishers
1 x	Edge cutter with pin 6.4mm
1 x	Ball shaped milling cutters
2 x	Flap Wheels
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Felt polishers
1 x	V-slot cutter 6.5mm
2 x	Flexishaft MICROMOT 110/P
1 x	Fibre-Cut Discs
1 x	TU 2004V
1 x	Grinding mop cylinder grit 120
1 x	TIP SPT-4
1 x	Lathe System PD 400
1 x	Diamond blade
1 x	High quality corundum grinding bits
1 x	Dividing attachment TA 230 for PF 250
1 x	BGA-Bottom-11
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Replacement glue sticks for HKP 220
1 x	Four Jaw Chuck
1 x	Titan Tweezers 5-031
1 x	High quality corundum grinding bits
1 x	Multipurpose Vices Primus100
1 x	Corundum bound cutting disc for LWS
1 x	Protective device for hand-operated MICROMOT
1 x	Diamond Grinding Bits 1,8mm
1 x	BGA-Bottom-105
1 x	Ball-shaped diamond coated 2.2mm
1 x	Cut off/mitre saw KGS 80
1 x	Replacement belts for BSL 220/E
1 x	Gear Chuck
1 x	Morse taper MT2 - B16
1 x	Mill/Drill Unit BFB 2000.
1 x	High quality corundum grinding bits
1 x	End side cutters EUROline-Conductive
1 x	Wrench Keys 1.5
1 x	Grinding and Polishing Machine SP/E
1 x	HSS twist drill set to DIN 338
1 x	End side cutters 45º EUROline-Conductive
1 x	2-speed scroll saw DSH
1 x	Corundum sanding discs for LWS
1 x	Boring Bar for CCMT
1 x	Bench drill machine TBM 220

€22,383.77