€395.00 + IVA

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Pincel ESD
1 x	Ponto rotativo CM2
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Cone morse CM2 - B16
1 x	Chave de Estrela 0
1 x	conjunto de 6 chaves fendas e philips
2 x	Folhas de lixa para OZI 220/E Grão 80
1 x	Jogo de ferros HM de 8mm
1 x	Pinça cerâmica 5-081
1 x	BIT-SET
1 x	Alicate de corte 160mm
1 x	Porta ferro Tipo H para SWH 1-A
1 x	Conjunto de 6 pinças ESD/EGB
1 x	Alicate Universal 170mm
1 x	Descarnador 160mm
1 x	Conj. Ferros 10mm pastilhados
1 x	Alicate de corte pontiagudo
1 x	Chave Pozidriv Isolada 14-643VDE
1 x	Prato para bucha para D250X550
1 x	Jogo de ferros 10 mm
1 x	Base de bancada ESD
1 x	Bucha 4 grampos independentes 100mm
2 x	Lâmina de imersão em HSS para OZI
1 x	Boina de Polir em Feltro
1 x	Pinça anti-alérgica 5-117-1
1 x	Disco de corte em HSS para OZI
1 x	Pasta de Polir Universal
1 x	Alicate de corte ESD
1 x	Luneta Fixa para D250X550
1 x	Alicate universal 160mm
1 x	Con. chaves bocas finas
1 x	Pinça anti-alérgica 5-125-1
1 x	conjunto de 6 chaves TORX ESD
1 x	Alicate Universal 185mm
1 x	conjunto de 6 chaves fendas e philips
1 x	Bucha de aperto rápido 0-13mm B16
1 x	conjunto de 6 chaves fendas ESD
1 x	Base de bacada ESD 9-361
1 x	Alicate de pontas redondas 160mm
1 x	Porta ferrametas aperto rápido SWH 1-A
1 x	Boina de Polir em Microfibra
1 x	Prato de rasgos para D250x550
1 x	conjunto de 6 sextavadas interior ESD
1 x	Pinça anti-alérgica 5-107-1
1 x	Folhas de lixa para OZI 220/E Grão 240
1 x	Bucha 3 grampos 125mm
1 x	descarnador 165mm
1 x	Alicate de pontas curvas 205mm
1 x	Alicate universal 190mm

€2,518.21