€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Conj. de 6 limas cabo de madeira
1 x	Alicate de corte ESD
1 x	Chave de fendas 0.8
1 x	Garlopa-Desengrossadeira ADH 200
1 x	Alicate pontas redondas ESD
1 x	Alicate de corte com pontas ESD
1 x	Chave de fendas 1.5
1 x	Ponta SPT-9
1 x	Alicate de pontas chatas
1 x	Chave de fendas 4.0
1 x	Ponta SPT-4
1 x	Fio de ligação a terra
1 x	Modulo de ligação a Terra
2 x	Pinça ESD 5-193
1 x	Pinça ESD 5-195
1 x	Pasta ACCENT 2270
1 x	Chave de fendas 1.8
2 x	Conj 5 pinças ESD
1 x	Chave de fendas 1.2
1 x	conjunto de 6 sextavadas interior ESD
1 x	Teste de resistência de Isolamento MG500
1 x	Alicate de corte mini ESD
1 x	Ponta SPT-3
1 x	Chave de fendas 2.5
1 x	descarnador 165mm
1 x	Conj 6 pinças ESD
1 x	Alicate de corte pontiagudo
1 x	Teste de resistência de Isolamento MG125
2 x	Pinça com pontas cerâmicas e ESD 5-096
1 x	Descarnador de precisão ESD
1 x	MICRO Miller FF 500
2 x	Alicate de pontas redondas
1 x	MICRO Miller FF 230
1 x	Alicate de corte mini ponteagudo
1 x	Aspirador SAA 901
1 x	conjunto de 6 chaves fendas ESD
1 x	conjunto de 6 sextavadas exterior ESD
1 x	Pinça ESD 5-191
1 x	Alicate de corte mini ESD
1 x	Alicate de pontas de corte
1 x	Ponta SPT-2
1 x	Fresa de facejar MT2
1 x	Alicate pontas chatas ESD
2 x	Conjunto de 6 pinças ESD/EGB
1 x	Pinça ESD 5-192
1 x	Pincel ESD
1 x	Alicate de pontas
1 x	Alicate de corte mini com retenção
1 x	Alicate de corte mini
1 x	Pincel de latão 4mm
1 x	BGA-Bottom-102
1 x	Paquímetro digital 300 mm
1 x	BGA-0246/0244

€6,250.93