€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	MICROMOT 50/EF
6 x	Jig saw blades made of HSS
4 x	Router base OFV
3 x	Compact workshop vacuum cleaner CW-matic
5 x	Supercut jig saw blades of special steel
2 x	MICRO-screwdrivers
2 x	Long neck angle milling/drilling unit LWB 220/E
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	MICRO Miller FF 500
2 x	HSS boring tool set, 6 pieces
2 x	Lathe System PD 400
3 x	Sanding fleece for LWS
2 x	MICRO Miller MF 70
2 x	Corundum sanding discs for LWS
2 x	MICROFLAME burner MFB/E
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	MICROMOT glue gun HKP 220
3 x	Bench drill machine TBM 220
2 x	Precision drill grinder FBS 12/EF
4 x	Bench drill press TBH
2 x	Sanding fleece for LWS
2 x	MICROMOT 230/E
1 x	Magnetic base
1 x	Corundum grinding disc for LWS
2 x	Corundum fan sander for LWS
1 x	Mill/Drill System BFW 40/E
1 x	MICRO Heat gun MH 550
1 x	Tungstein carbide rasp - and cutting disc
1 x	Precision Drill/Grinder FBS 240/E
2 x	Precision steel vice PM 40
1 x	Replacement glue sticks for HKP 220
1 x	Polishing Set
1 x	Sanding Discs
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Cylindrical cutters
2 x	Replacement belts for BSL 220/E
1 x	MICROMOT drill stand MB 200
1 x	Belt sander BS/E
1 x	Sanding pads for OZI 220/E grit 240
1 x	Saw blade made of high-alloy special steel
1 x	Diamond Grinding Bits 1,8mm
2 x	Universal and oil siphoning pump AP 12
1 x	Corundum sanding discs for LWS
1 x	Solid carbide saw blade
4 x	Step clamps made of steel
2 x	MICROMOT Mains Adapter NG 5/E
3 x	Blade for Wood and Plastics
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Professional set for finish grinding and polishing
1 x	Lambswool polishing disc
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Corundum fan sander for LWS
2 x	Replacement belts for BSL 220/E
2 x	HSS immersion saw blades for OZI
2 x	sanding belts for BBS/s Grit 150
1 x	Hot wire cutter THERMOCUT 650
3 x	Dividing attachment TA 230 for PF 250
1 x	Super-fine sanding discs grain 000
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Replacement cutting disc for MICRO cutter MIC
2 x	Replacement belts for BSL 220/E
1 x	Collet Set for accurate use on round components
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Tungsten Carbide Tipped (TCT)
1 x	Cone shaped milling cutter
3 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	sanding belts for BBS/s Grit 240
1 x	DIL44/SSOP44 ZIF 240mil
2 x	Slot cutter 6.5mm
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Tool holder for rotary tools
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	BGA-Bottom-102
1 x	DIL28/QFN28-2 ZIF-CS
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-Bottom-118
2 x	10-piece wood router cutter set
1 x	sandpaper for PS 13 Grit 400
1 x	Blade holders for DS 460
2 x	Half round cutter 13mm
1 x	V-slot cutter 6.5mm
1 x	BGA-0246/0244
1 x	Multiform grindstone
3 x	Three-jaw steel drill chuck
1 x	Edge cutter with pin 6.4mm
1 x	Angle cutter 45 °
1 x	Fixed Steady
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Flexishaft MICROMOT 110/P
1 x	Slot cutter 3.2mm
1 x	BGA-0246/0243
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Replacement carving blades for MSG
2 x	MICROMOT tool holder
2 x	Micro Compound Table KT 70
1 x	BGA-Bottom-103
1 x	Core box bit 3.2mm
2 x	Grinding mop cylinder grit 80
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
2 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL40/TQFP64 ZIF CC-1
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Backing disc for LWS
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Fine dust paper filter for CW-matic
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Super-Cut
1 x	DIL40/TQFP44-1 ZIF MCS51
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Three jaw chuck for the lathe DB 250
1 x	Fluted filter for CW-matic
1 x	Diamond Coated
1 x	Glass fibre contact cleaner brush
1 x	Lathe tools 10mm pastilhados
1 x	Hand magnifier with LED light 3X
1 x	Super-fine sanding discs grain 400
1 x	Broca de alta duração de 1.1mm
2 x	Independent four jaw chuck for the DB 250
1 x	Ball-shaped diamond coated 1.2mm
1 x	Cutting disc, with reinforcement
1 x	Warding files set, 6pcs
4 x	Chuck for TBM 220
1 x	Super-fine sanding discs grain 2000
1 x	Machine Vice MS 4
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Band knife of hardened spring band steel (without teeth)
1 x	HSS immersion saw blades for OZI
1 x	Tungsten carbide cutters set
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Broca de alta duração de 2.4mm
1 x	Blade for Steel and brass
2 x	Diamond blade for MBS 240/E
1 x	Blade guides separately
1 x	HSS cutting blade for OZI
1 x	Diamond cutting blade for OZI
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Engraving tool GG
1 x	Footswitch FS
1 x	BeeProg2
1 x	Precision Vice FMS 75
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Diamond-coated cutting disc for MIC
1 x	Protective device for hand-operated MICROMOT
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Replacement belts for BSL 220/E
1 x	Universal polishing paste
1 x	Flexishaft MICROMOT 110/BF
1 x	IC tweezers
1 x	Centre Turning Attachment
1 x	Cups brushes
1 x	surface planing and thicknessing ADH 250
1 x
1 x	Aluminium Die-Cast
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Precision Vice FMZ
1 x	Handy 1515
1 x	Table Saw TKS 2500 SC
1 x	Grinding mop cylinder grit 120
1 x	Steel cups
1 x	Stainless steel brushes
1 x	Vacum SAA 901
1 x	Polishing paste
1 x	MICROMOT steel collet set
1 x	Beeprog2C
1 x	Belt sander BBS/S
1 x	Safety Insulated Phillips Screwdriver 14-632VDE

€28,356.39