€395.00 + IVA

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	BGA-Bottom-20
1 x	BGA-Bottom-125
1 x	Broca de alta duração de 0.8mm
1 x	Tambor de lixa Grão 120
1 x	Fresa de perfilar 5.0mm
2 x	BGA-0245/0242
2 x	Alicate de pontas chatas 185mm
1 x	Discos de lixa grão 400
1 x	Fresa de arredondar raio 3.2mm
1 x	Interreptor de pé FS
1 x	BGA-Bottom-212
2 x	Porta Pinça ER25 para D250X550
1 x	Fresa de ranhurar em V 6.5mm
1 x	Prato para bucha para D250X550
1 x	conjunto de 6 chaves fendas ESD
1 x	Cintas de lixa grão 180 para BSL220/E
1 x	Fresa de barra combinada 6.5/2.5mm
1 x	Cone morse CM2 - B16
1 x	Fresa de Ranhurar 3.2mm
1 x	Professional Drill/Grinder IBS/E
2 x	Alicate de pontas direitas 205mm
1 x	Fresa de ensamblar 6.4mm
1 x	Disco de polir em feltro, medio
1 x	Espelho de inspeção 1-909
1 x	BGA-Bottom-166
1 x	Alicate Universal 170mm
1 x	Conjunto de 3 ferros para roscas métricas, rectificados em HSS C
1 x	Broca de alta duração de 2.5mm
1 x	Alicate de pontas direitas 165mm
1 x	Four Jaw Chuck
1 x	Laminas sem pinos 50TPI
1 x	Espelho de Inspeção 1-978
1 x	Descarnador 160mm
1 x	Lixa para BBS/S grão 150
1 x	Serra de Fita MBS 240/E
1 x	BGA-Bottom-154
1 x	Broca de alta duração de 2.0mm
1 x	Alicate Universal 185mm
1 x	Broca de alta duração de 0.9mm
1 x	Suporte para mini berbequins.
1 x	BGA-Bottom-191
1 x	BGA-Bottom-157
1 x	Jogo de ferros HM 10mm
1 x	Conj. de 6 limas cabo de madeira
1 x	Tambor de lixa Grão 240
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Fixed Steady
1 x	Laminas sem pinos 17TPI
1 x	DIL32/PLCC32 ZIF
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL20W/SOIC20 ZIF 300mil

€3,621.75