€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Precision quick-action drill chuck 0-16mm B16
2 x	Broca de alta duração de 2.3mm
1 x	Steel tape measure
4 x	Broca de alta duração de 0.4mm
2 x	Broca de alta duração de 1.2mm
2 x	Precision magnetic gauge stand
2 x	Broca de alta duração de 2.2mm
1 x	surface planing and thicknessing ADH 250
2 x	Inpection mirror 1-978
2 x	Broca de alta duração de 1.0mm
2 x	broca de alta duração de 0,2mm
2 x	broca de alta duração de 0,6mm
1 x	magnetic base 80kg
2 x	Broca de alta duração de 1.1mm
1 x	Broca de alta duração de 2.4mm
1 x	3-jaw chuck centrically clamping 100mm
3 x	Mill/Drill System BFW 40/E
2 x	Broca de alta duração de 0.5mm
2 x	PLCC Extractor
1 x	Morse taper MT2 - B16
1 x	Insert CCGT120404-AK
1 x	Broca de alta duração de 2.1mm
1 x	sclcr2525M12
1 x	Broca de alta duração de 0.9mm
2 x	lathe tools 10mm
4 x	TIP SPT-9
5 x	MICRO Miller MF 70
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
2 x	Broca de alta duração de 1.4mm
3 x	IC tweezers
2 x	Bench drill press TBH
1 x	Glass fibre contact cleaner brush
1 x	Blade guides separately
1 x	Solid carbide saw blade
1 x	Slot cutter 3.2mm
5 x	TIP SPT-4
5 x	TIP SPT-3
1 x	Professional set for finish grinding and polishing
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	3-jaw chuck centrically clamping 160mm
1 x	10-piece wood router cutter set
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Precision quick-action drill chuck 0-10mm B16
4 x	TIP SPT-6
1 x	sandpaper for PS 13 Grit 400
1 x	HSS immersion saw blades for OZI
1 x	Replacement glue sticks for HKP 220
4 x	Bench drill machine TBM 220
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Parting tool 10mm
1 x	Sanding pads for OZI 220/E grit 150
1 x	DCGT 070202F-AL
1 x	Rebating cutter 6.4mm
4 x	TIP SPT-10
1 x	centrically clamping 100mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	CM2 - B16 - M10
1 x	Diamond blade
2 x	Boring Bar for CCMT
2 x	Polishing felt, medium hard
1 x	Lambswool polishing disc
2 x	Warding files set, 6pcs
1 x	Diamond cutting blade for OZI
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Telephone pliers straight 205mm
1 x	Broca de alta duração de 0.7mm
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Boring Bar for DCMT 10mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Diamond Coated
1 x	Morse taper MT3 - B16
1 x	sandpaper for PS 13 Grit 240
1 x	Broca de alta duração de 1.5mm
3 x	MICROMOT 50/EF
1 x	Sanding pads for OZI 220/E grit 80
1 x	Diamond blade for MBS 240/E
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Broca de alta duração de 0.8mm
1 x	Side cutters 195mm
1 x	Side cutters 160mm
1 x	Multiform grindstone
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT Mains Adapter NG 2/E
2 x	PLCC Puller
1 x	Insert CCGT060202-AK
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Boring Bar for CCMT 8mm
3 x	Professional Drill/Grinder IBS/E
1 x	Super-fine sanding discs grain 400
1 x	Blade holders for DS 460
1 x	Telephone pliers bent 205mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Flat nose pliers 165mm
1 x	Blade for Steel and brass
4 x	Precision drill grinder FBS 12/EF
2 x	lathe tools 8mm
4 x	TIP SPT-2
3 x	MICROMOT 230/E
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Saw blade made of high-alloy special steel
1 x	Combination pliers 190mm
1 x	Wire strippers 165mm
1 x	Microfibre cloth
3 x	Cutting tool HM 20 mm
1 x	Dial gauge
3 x	MICRO Miller FF 230
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Tungsten Carbide Tipped (TCT)
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	centrically clamping 125mm
1 x	Combination pliers 210mm
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Super-fine sanding discs grain 2000
1 x	Tungsten tipped saw blade
1 x	HSS immersion saw blades for OZI
1 x	3-jaw chuck centrically clamping 125mm
1 x	Super-fine sanding discs grain 000
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	SCLCR1010E06
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Lathe tools 8mm pastilhados
2 x	Precision Drill/Grinder FBS 240/E
1 x	Rounding over cutter 6.4mm
1 x	4-jaw chuck individually clamping 100mm
1 x	Super-Cut
1 x	Lathe tools 10mm pastilhados
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	4-jaw chuck individually clamping 80mm
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	V-slot cutter 6.5mm
1 x	Round nose pliers 165mm
1 x	Professional polishing sponge
1 x	Broca de alta duração de 0.3mm
1 x	Replacement carving blades for MSG
1 x	Broca de alta duração de 1.3mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Backing disc for LWS
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	sandpaper for PS 13 Grot 180
1 x	HSS cutting blade for OZI
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Broca de alta duração de 2.5mm
1 x	Crosscut 'Super-Cut' blade
2 x	Angle cutter 45 °
1 x	Boring Bar for CCMT 16mm
1 x	Cutting tool 10 mm
1 x	MICROMOT 50/E
1 x	Magnetic base
1 x	Wire strippers 160mm
1 x	Beeprog2C
1 x	Four Jaw Chuck
1 x	Half round cutter 13mm
1 x	Corundum fan sander for LWS
1 x	Combination pliers 170mm
1 x	Step clamps made of steel
1 x	Cutting disc, with reinforcement
1 x	Sanding fleece for LWS
1 x	Core box bit 3.2mm
1 x	MICROMOT steel collet set
1 x	Wire strippers 165mm
1 x	Combi cutter 6.5/2.5mm
1 x	Replacement belts for BSL 220/E
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-105
1 x	TORX-screwdrivers T7
1 x	Chuck for TBM 220
1 x	BGA-Bottom-111
1 x	Side cutters 160mm
1 x	Tungsten carbide cutters set
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Machine Vice MS 4

€14,153.39