€395.00 + IVA

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Comparador de alavanca
1 x	Paquímetro digital 300 mm
1 x	Mini rebarbadora LHW
1 x	Tambor de lixa Grão 120
1 x	Base magnetica para comparador
1 x	Régua em aço
1 x	Lixadeira de tambor WAS/E
4 x	Broca de ponto 8.00 x 3.15
1 x	Tambor de lixa Grão 80
1 x	Lixadeira de disco TG 125/E
1 x	Peclise digital 500mm
1 x	Conjunto de 49 peças em 1/4", com punho de roquete tipo pistola
1 x	Chave Phillips Isolada 14-632VDE
1 x	Polidora Angular WP/E
1 x	Alicate cravar 8P/8C
1 x	Chave Phillips Isolada 14-633VDE
1 x	Caneta Lixadeira PS 13
1 x	Alicate cravar terminais
1 x	Comparador
1 x	Conjunto profissional de polimento e acabamento.
1 x	Chave Phillips Isolada 14-631VDE
2 x	Broca de ponto 3.15 x 1.25
1 x	Descarnador ajustavel
1 x	Lixadeira de cinta BS/E
1 x	Bomba para mudar óleo AP 12 de 12V
1 x	Tungstein carbide rasp - and cutting disc
1 x	Esmeriladora e polidora Machine SP/E
3 x	Broca de ponto 5.00 x 2.00
1 x	BGA-Bottom-118
1 x	BGA-Bottom-101
2 x	Conjunto de três brocas de ponto
1 x	BGA-Bottom-10
2 x	BeeHive204
2 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 2.9mm
1 x	BGA-Bottom-11
2 x	Broca de ponto 6.30 x 2.50
2 x	Broca de alta duração de 2.8mm
2 x	Broca de alta duração de 3.0mm
1 x	BGA-Bottom-125
2 x	Broca de alta duração de 2.7mm
1 x	BGA-Bottom-108
3 x	Pincel ESD
3 x	Pincel ESD
1 x	BGA-Bottom-1
1 x	Broca de ponto 3.15 x 1.00
1 x	Broca de alta duração de 2.4mm
1 x	Broca de alta duração de 2.6mm

€8,244.77