€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Broca de alta duração de 1.1mm
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Broca de alta duração de 2.0mm
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 1.3mm
1 x	BGA-0245/0241
1 x	BGA-Bottom-108
4 x	MICRO Miller FF 500
3 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x	Glass fibre contact cleaner brush
1 x	Pensander PS 13
1 x	BGA-0245/0242
2 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	BGA-Bottom-111
1 x	BGA-Bottom-102
2 x	Brass contact cleaner brush
1 x	Flap Wheels
1 x	BGA-Bottom-103
2 x	MICRO Miller MF 70
1 x	Replacement glue sticks for HKP 220
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Three-jaw steel drill chuck
1 x	Broca de alta duração de 1.0mm
1 x	Flat nose pliers 165mm
2 x	MICRO Miller FF 230
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	IC Test clip 20 pins
1 x	BGA-Bottom-11
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Engraving tool GG
1 x	Crimping plier for BNC
1 x
1 x	Broca de alta duração de 3.0mm
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	BGA-Bottom-106
1 x	Side cutters 160mm
1 x	BGA-Bottom-115
1 x	PLCC Puller
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	BeeHive208S
1 x	Universal and oil siphoning pump AP 12
1 x	Precision magnetic gauge stand
1 x	BGA-Bottom-1
1 x	Dividing attachment TA 230 for PF 250
1 x	BGA-Bottom-101
1 x	Warding files set, 6pcs
1 x	BGA-Bottom-10
1 x	Glass fibre contact cleaner brush
1 x	Step clamps made of steel
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	BeeHive204
1 x	ESD-handling set

€22,044.06