€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	High quality corundum grinding bits
1 x	Grinding and Polishing Machine SP/E
1 x	Flexible silicon discs
1 x	Ball-shaped diamond coated 3.2mm
1 x	3-jaw chuck centrically clamping 80mm
2 x	4-jaw chuck individually clamping 125mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	TIP SPT-2
2 x	Wood Lathe DB900
1 x	ANTISTATIC 200ml
1 x	sclcr2525M12
1 x	TIP SPT-9
1 x	PROTECTION 200ml
5 x	Threading inserts 60º
3 x	2-speed scroll saw DSH
5 x	MICRO Miller MF 70
3 x	Table Saw FET
4 x	MICRO Band Saw MBS 240/E
1 x	Magnetic base
2 x	Wood Lathe DB450
1 x	Flame shaped milling cutters
1 x	POLISHER 200ml
1 x	Steady rest for D250X550
4 x	Threading inserts 60º
1 x	Crimping plier for BNC
1 x	Cutting tool 8 mm
2 x	Broca de alta duração de 2.4mm
1 x	DEGRESER 200ml
3 x	Broca de alta duração de 3.0mm
3 x	TCMT090204
2 x	Cutting tool 10 mm
1 x	Set of special steel cutters
2 x	ESD Tweezers 5-193
1 x	CD-CLEANER 200ml
1 x	Table Sawr TKS 315 E
2 x	surface planing and thicknessing ADH 200
1 x	VASELINE 200ml
2 x	3-jaw chuck centrically clamping 125mm
1 x	TIP SPT-6
2 x	ESD Tweezers 5-195
1 x	centrically clamping 100mm
3 x	Insert LGTN-2
1 x	Quick-action tool holder kit SWH AA
5 x	MICRO cutter MIC
1 x	Cutting tool HM 20 mm
4 x	Turning inserts CCMT09T304
1 x	SPRAYOIL 200ml
2 x	Table Saw TKS 2500 SC
4 x	MICRO woodturning lathe DB 250
1 x	Cutter head for copy and surface milling MT2
4 x	Jig saw STS 12/E
1 x	Disc cutters
3 x	Cut off/mitre saw KGS 80
2 x	Broca de alta duração de 2.9mm
1 x	SILICONE 200ml
2 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Warding files set, 6pcs
1 x	Ball shaped milling cutters
3 x	Super jig saw STS/E
1 x	Follow rest for D250X550
1 x	Wolfram vanadium steel milling bits
1 x	machine base with shelves for D250X550
1 x	Tungsten carbide cutters set
2 x	TIP SPT-3
1 x	Morse taper MT2 - B16
1 x	MULTI 200ml
1 x	Cutting tool 16 mm
1 x	Tungsten carbide cutter 2.0mm
1 x	ESD Tweezers 5-194
1 x	4-jaw chuck individually clamping 80mm
1 x	Dial gauge
4 x	TCMT110204
1 x	Solid carbide stylus for engraving
2 x	Conj 5 pinças ESD
1 x	4-jaw chuck individually clamping 100mm
2 x	Broca de alta duração de 2.1mm
2 x	MICRO Miller FF 500
4 x	ESD Brushe
1 x	TUNER 200ml
4 x	Turning inserts WCMX050308F
2 x	surface planing and thicknessing ADH 250
1 x	3-jaw chuck centrically clamping 100mm
1 x	CM2 - B16 - M10
4 x	Threading inserts 60º
2 x	Insert LGTN-3
1 x	Broca de alta duração de 2.2mm
1 x	Scroll saw DS 230/E
4 x	6-piece set of ESD/EGB tweezers
1 x	Tungsten carbide cutter 1.0mm
2 x	Broca de alta duração de 2.7mm
3 x	MICRO Miller FF 230
1 x	Cutter head for copy and surface milling MT3
1 x	PRINTER 200ml
1 x	Broca de alta duração de 2.6mm
4 x	WCMT050308
1 x	Cylindrical cutters
1 x	SCREEN 200ml
1 x	End milling cutter kit HSS 12 pcs
2 x	centrically clamping 125mm
3 x	Thicknesser DH 40
1 x	lathe tools 10mm
1 x	Collet chuck ER32 for D250X550
1 x	Collet chuck ER25 for D250X550
1 x	VIDEOCLEAN 200ml
2 x	ESD Tweezers 5-191
1 x	Lathe tools 10mm pastilhados
1 x	TIP SPT-10
1 x	TOP-PIN 200ml
1 x	Lathe chuck flange for D250X550
1 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 3.0mm
1 x	Wolfram vanadium steel milling bits
1 x	MICRO shaper MP 400
1 x	FREEZER-BR 200ml
1 x	PROLUB 200ml
1 x	SPRAYFLON 200ml
1 x	SCMT060204
1 x	DUSTER-BR 200ml
2 x	Floor cover ESD
1 x	Beeprog2C
1 x	Cone shaped milling cutter
1 x	Tool holder type D for SWH 1-A
1 x	Digital caliper gauge 300 mm
1 x	FLUX-OFF 400ml
1 x	TIP SPT-4
2 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Cylinder shaped milling cutters
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Vacum SAA 901
1 x	Broca de alta duração de 2.3mm
1 x	Face clamping disc for D250X550
1 x	Cross-recess Screwdrivers 0
1 x	BIT-SET
1 x	Screwdriver 2.5
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	PLCC Extractor
1 x	Step clamps made of steel
1 x	BGA-Bottom-105
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Screwdriver 3.0
1 x	IC tweezers
1 x	SMD Tweezers 5-062
1 x	Replacement glue sticks for HKP 220
1 x	Cross-recess Screwdrivers 0
1 x	SMD Tweezers 5-052
1 x	SMD Tweezers 5-053
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Screwdriver 3.0
1 x	Grinding mop cylinder grit 120
1 x	Contact bracelet with spiral cord
1 x	BGA-Bottom-111
1 x	Corundum fan sander for LWS
1 x	Brass contact cleaner brush
1 x	ESD-handling ser 9-361
1 x	SMD Tweezers 5-061
1 x	BGA-0245/0242
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	BGA-Bottom-102
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Flap Wheels
1 x	Surface planer AH 80
1 x	Glass fibre contact cleaner brush
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Combination pliers 160mm

€32,894.79