Top » Catalog » Elnec » 60-0053

€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
4 x EUROline set of pliers
4 x Broca de alta duração de 2.2mm
3 x Drill chuck with sliding sleeve for the tailstock
5 x Broca de alta duração de 2.4mm
4 x Broca de alta duração de 1.5mm
3 x TORX-screwdrivers T6
4 x Broca de alta duração de 0.3mm
5 x Broca de alta duração de 2.5mm
5 x Broca de alta duração de 1.2mm
4 x EUROline mini side cutter
1 x Boring Bar for DCMT 10mm
3 x Glass fibre contact cleaner brush
3 x Super safety and specialty bit set, 75-piece
3 x 6-piece screwdriver and cross-recess set
3 x Broca de alta duração de 0.4mm
4 x EUROline mini side cutter
1 x SCLCR1010E06
1 x sclcr2525M12
5 x Broca de alta duração de 1.4mm
5 x Broca de alta duração de 0.9mm
1 x TORX-screwdrivers T4
1 x Boring Bar for CCMT 8mm
1 x MICROMOT drill stand MB 200
5 x Broca de alta duração de 2.1mm
4 x broca de alta duração de 0,2mm
2 x 6-piece screwdriver and cross-recess set
1 x Solid carbide saw blade
1 x Chuck for TBM 220
1 x Boring Bar for CCMT
1 x Boring Bar for CCMT 16mm
4 x Broca de alta duração de 1.0mm
4 x Broca de alta duração de 0.7mm
3 x Glass fibre contact cleaner brush
1 x 6-piece screwdriver and cross-recess set
4 x EUROline flat nose pliers
4 x EUROline top cutter
3 x End side cutters EUROline-Conductive
2 x broca de alta duração de 0,6mm
4 x EUROline-Conductive set of pliers
2 x Broca de alta duração de 0.5mm
1 x Screwdriver bit set. 49-piece.
3 x Side cutters EUROline-Conductive
1 x Broca de alta duração de 3.0mm
3 x Round nose pliers 45º EUROline-Conductive
2 x Warding files set, 6pcs
2 x Brass contact cleaner brush
3 x EUROline side cutter rounded head
3 x Side cutters 160mm
1 x TIP SPT-3
3 x EUROline mini side cutter
3 x Broca de alta duração de 2.3mm
3 x Broca de alta duração de 2.0mm
1 x Broca de alta duração de 2.6mm
3 x Flat nose pliers 45º EUROline-Conductive
1 x Broca de alta duração de 2.9mm
2 x Mini side cutters EUROline-Conductive
2 x Snipe nose pliers 45º EUROline-Conductive
4 x End side cutters 45º EUROline-Conductive
1 x Hot wire cutter THERMOCUT 650
3 x EUROline round nose pliers
2 x Five piece HSS chisel set
2 x Snipe nose pliers 45º EUROline-Conductive
2 x Broca de alta duração de 2.7mm
1 x Combination pliers 210mm
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x Independent four jaw chuck for the DB 250
2 x Side cutters 195mm
4 x Telephone pliers bent 205mm
4 x Telephone pliers straight 205mm
2 x Snipe nose pliers 45º EUROline-Conductive
2 x Three jaw chuck for the lathe DB 250
3 x EUROline end cutter
3 x Flat nose pliers 165mm
3 x Mini side cutters EUROline-Conductive
1 x Wire strippers 165mm
2 x EUROline snipe nose pliers
2 x EUROline side cutter pointed head
1 x TORX-screwdrivers T8
2 x Broca de alta duração de 2.8mm
2 x 6-piece TORX-screwdriver-set
1 x surface planing and thicknessing ADH 250
1 x Dial gauge
1 x High quality corundum grinding bits
1 x BGA-Bottom-106
1 x BGA-0245/0243
1 x Fine dust paper filter for CW-matic
3 x sanding belts for BBS/s Grit 150
1 x BGA-0246/0243
1 x Sanding pads for OZI 220/E grit 150
1 x BGA-Bottom-125
1 x Felt polishers
1 x Precision magnetic gauge stand
2 x HSS cutting blade for OZI
1 x Flexishaft MICROMOT 110/BF
1 x VIDEOCLEAN 200ml
3 x sanding belts for BBS/s Grit 80
1 x Combination pliers 185mm
1 x Flexible silicon discs
1 x Steel brushes
1 x HSS immersion saw blades for OZI
1 x BGA-0246/0244
1 x Spare cutting wire
1 x Polishing felt, medium hard
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
2 x Mini side cutters EUROline-Conductive
1 x Sanding pads for OZI 220/E grit 80
1 x 4-jaw chuck individually clamping 125mm
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Wheels brushes
1 x 3-jaw chuck centrically clamping 80mm
1 x Flexishaft MICROMOT 110/P
2 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Stainless steel cups
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x centrically clamping 125mm
1 x BGA-Bottom-115
1 x Precision quick-action drill chuck 0-10mm B16
1 x Flexible silicon discs
1 x sanding belts for BBS/s Grit 240
1 x Round nose pliers 165mm
1 x Side cutters 160mm
1 x SmartProg2
2 x BeeHive204
1 x High quality corundum grinding bits
2 x Sanding pads for OZI 220/E grit 240
1 x Combination pliers 170mm
1 x Three-jaw steel drill chuck
1 x FREEZER-BR 200ml
1 x BGA-Bottom-102
3 x BeeHive208S
1 x Diamond cutting blade for OZI
1 x Stainless steel brushes
1 x Protective device for hand-operated MICROMOT
1 x Morse taper MT3 - B16
1 x 3-jaw chuck centrically clamping 100mm
1 x Flexible polishing pad set
1 x Flexible silicon discs
1 x Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x Precision quick-action drill chuck 0-8mm B16
1 x BGA-Bottom-118
1 x Morse taper MT2 - B16
1 x Wire strippers 165mm
1 x ESD Tweezers 5-194
1 x Steel wheels
1 x POLISHER 200ml
1 x MICRO Miller FF 230
1 x Diamond Cutting Discs
1 x MICROMOT tool holder
1 x 3-jaw chuck centrically clamping 125mm
€38,232.29
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook