€7.30 + VAT

FREEZER-TOP 200ml
[1301412]

FREEZER-TOP 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-TOP is CFC-free.
  • It ensures reliable cooling down to -50° C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, nonflammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 1.08 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: none
ODP: 0.00
Reviews

Customers who bought this product also purchased
BeeProg2
BeeProg2
Manufacturers
2 x BIT-SET
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x Coarse-toothed (25 TPI per 25mm)
1 x Cross-recess Screwdrivers 0
1 x Table Saw TKS 2500 SC
1 x Replacement carving blades for MSG
3 x 6-piece screwdriver and cross-recess set
1 x Round nose pliers 185mm
3 x 6-piece socket wrenches ESD
1 x Combination pliers 190mm
1 x Combination pliers 205mm
1 x Safety insulated screwdrivers 14-606 VDE
1 x EUROline end cutter
1 x Cross-recess Screwdrivers 0
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Flat nose pliers 165mm
1 x EUROline flat nose pliers
1 x EUROline snipe nose pliers
1 x PLCC Extractor
2 x Safety Insulated Phillips Screwdriver 14-632VDE
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Mini side cutters EUROline-Conductive
1 x Coarse-toothed (18 TPI per 25mm)
1 x Safety Insulated Phillips Screwdriver 14-633VDE
1 x Telephone pliers bent 205mm
1 x Telephon pliers straight 200mm
2 x 6-piece TORX-screwdriver-set
2 x 3-jaw chuck centrically clamping 125mm
3 x 6-piece set of ESD/EGB tweezers
1 x Screwdriver 4.0
1 x Telephon pliers straight 160mm
3 x Quick-action tool holder kit SWH AA
1 x Round nose pliers 160mm
3 x 6-piece screwdriver and cross-recess set
3 x 6pcs Double Open End wrench set
3 x ACCENT SERVICE TOOLS SET
1 x Combination pliers 185mm
3 x Antiallergical Tweezers 5-121-1
1 x Blade holders for DS 460
1 x Snipe nose pliers 45º EUROline-Conductive
1 x 3-jaw chuck centrically clamping 80mm
1 x 6-piece wrench key set ESD
1 x Screwdriver 5.5
1 x ESD-handling ser 9-361
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Safety insulated screwdrivers 14-608 VDE
1 x Safety Insulated Phillips Screwdriver 14-634VDE
1 x EUROline round nose pliers
1 x Safety Insulated Phillips Screwdriver 14-631VDE
1 x PVC-insulated tweezers 5-117-6
1 x Telephon pliers bent 200mm
1 x Combination pliers 170mm
1 x 3-jaw chuck centrically clamping 160mm
2 x 6-piece TORX-screwdriver-set ESD
1 x Coarse-toothed (10 TPI per 25mm)
3 x Tungsten Carbide Tipped (TCT)
3 x Lathe chuck flange for D250X550
1 x Super-Cut
1 x Ceramic tweezers 5-081
1 x Replacement belts for BSL 220/E
3 x Follow rest for D250X550
2 x Collet chuck ER25 for D250X550
1 x Cutting tool 10 mm
2 x 6-piece screwdriver and cross-recess set
1 x Supercut jig saw blades of special steel
1 x Multiform grindstone
2 x Lathe tools 10mm pastilhados
2 x Tool holder type H for SWH 1-A
2 x Morse taper MT2 - B16
1 x 6-piece screwdriver and cross-recess set ESD
2 x Diamond Coated
3 x Steady rest for D250X550
3 x Tool holder type D for SWH 1-A
1 x Replacement belts for BSL 220/E
1 x Brass contact cleaner brush
2 x Face clamping disc for D250X550
2 x centrically clamping 125mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Cylinder sander WAS/E
1 x 6-piece screwdriver set ESD
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Antiallergical Tweezers 5-117-1
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x quantum revolving center CM2
1 x Replacement belts for BSL 220/E
1 x Precision quick-action drill chuck 0-13mm B16
1 x SILICONE 200ml
1 x Precision lathe PD 250/E
1 x Precision quick-action drill chuck 0-10mm B16
2 x Lathe System PD 400
1 x SPRAYOIL 200ml
1 x DUSTER-BR 200ml
1 x TUNER 200ml
1 x 4-jaw chuck individually clamping 125mm
1 x VASELINE 200ml
1 x FLUX-OFF 400ml
1 x lathe tools 10mm
1 x Inspector mirror
1 x TOP-PIN 200ml
1 x SCREEN 200ml
1 x CD-CLEANER 200ml
1 x Collet chuck ER32 for D250X550
€14,048.81
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook