Top » Catalog » BERNSTEIN » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ANTISTATIC 200ml

TORX-screwdrivers T9

ESD Tweezers 5-194

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum grinding disc for LWS
1 x	Cotton polishers
1 x	Rebating cutter 6.4mm
1 x	Brass brushes
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Tungsten carbide cutter 1.0mm
1 x	Diamond blade
1 x	Tungsten carbide cutters set
2 x	Cotton polishers
1 x	Angle cutter 45 °
1 x	Flap Wheels
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Crosscut 'Super-Cut' blade
2 x	Super-Cut
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	Corundum bound cutting disc for LWS
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Tungsten carbide cutter 3.0mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cut off/mitre saw KGS 80
1 x	Edge cutter with pin 6.4mm
1 x	High quality corundum grinding bits
2 x	Tungsten Carbide Tipped (TCT)
1 x	Cylinder shaped milling cutters
1 x	6pcs Double Open End wrench set
2 x	V-slot cutter 6.5mm
1 x	Grinding mop cylinder grit 120
1 x	Felt polishers
1 x	Diamond Grinding Bits 1,8mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Cotton polishers
1 x	Diamond Coated
1 x	Three-jaw steel drill chuck
3 x	Cutting disc, with reinforcement
1 x	6-piece screwdriver and cross-recess set
1 x	ESD Brushe
1 x	Tungsten tipped saw blade
1 x	High quality corundum grinding bits
1 x	Felt polishers
1 x	ACCENT SERVICE TOOLS SET
1 x	FREEZER-BR 200ml
2 x	Diamond-coated cutting and roughing disc
1 x	Step clamps made of steel
1 x	Universal polishing paste
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Cross-recess Screwdrivers 2
1 x	Fluted filter for CW-matic
1 x	Corundum fan sander for LWS
1 x	MICRO Miller FF 230
1 x	Super-fine sanding discs grain 400
1 x	Screwdriver 3.0
1 x	Super-fine sanding discs grain 2000
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Cross-recess Screwdrivers 2
1 x	Precision lathe PD 250/E
1 x	Professional set for finish grinding and polishing
1 x	Screwdriver 5.5
1 x	Flat nose pliers 165mm
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Backing disc for LWS

€3,234.02