€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Warding files set, 6pcs
1 x	Precision Vice FMS 75
1 x	Diamond-coated cutting and roughing disc
1 x	Grinding mop cylinder grit 240
1 x	Collet Set for accurate use on round components
1 x	Dial gauge
1 x	Precision caliper square
1 x	Sanding Drums
1 x	HSS drill bits 1.6mm
1 x	MICROMOT 230/E
1 x	Professional Drill/Grinder IBS/E
1 x	Long neck straight drill/grinder LB/E
1 x	MICRO-screwdrivers
1 x	14-piece parallel supports set
1 x	Three jaw chuck for the lathe DB 250
1 x	Tungsten carbide drills Ø1,5mm
1 x	Precision Drill/Grinder FBS 240/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	magnetic base 80kg
1 x	Lathe System PD 400
1 x	MICROMOT glue gun HKP 220
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Super-fine sanding discs grain 400
1 x	Inpection mirror 1-978
1 x	Super-fine sanding discs grain 2000
1 x	Broca de ponto 5.00 x 2.00
1 x	Blade holders for DS 460
1 x	Mill/Drill System BFW 40/E
1 x	MICROMOT 50/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	MICRO Heat gun MH 550
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Inspector mirror
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Backing disc for LWS
1 x	HSS drill bits 1.2mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	HSS drill bits 1.0mm
2 x	MICROFLAME burner MFB/E
1 x	Screwdriver bit set. 49-piece.
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Grinding mop cylinder grit 120
1 x	HSS drill bits 0.8mm
1 x	Three piece thread cutting set
1 x	Independent four jaw chuck for the DB 250

€3,468.45