€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Long neck angle grinder LHW
2 x	10-piece wood router cutter set
1 x	Blade holders for DS 460
2 x	Blade guides separately
1 x	Brass brushes
2 x	Angle cutter 45 °
3 x	Professional polishing sponge
1 x	Flame shaped milling cutters
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	MICRO cutter MIC
2 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Steel wheels
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Slot cutter 5.0mm
1 x	Fine dust paper filter for CW-matic
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Disc Sander TG 250/E
1 x	Diamond Cutting Discs
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Universal polishing paste
1 x	Slot cutter 3.2mm
1 x	Wolfram vanadium steel milling bits
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Pensander PS 13
2 x	Disc Sander TG 125/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Stainless steel brushes
2 x	Super-fine sanding discs grain 000
1 x	Metal Cutting Blades
1 x	Handy 1515
1 x	Side cutters 160mm
1 x	Glass fibre contact cleaner brush
1 x	Blade for Wood and Plastics
1 x	Silicon-Carbide.
1 x	MICROMOT Mains Adapter NG 5/E
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Diamond Cutting Discs
1 x	Replacement carving blades for MSG
1 x	Polishing felt, medium hard
2 x	Tungsten carbide cutters set
1 x	Ball shaped milling cutters
2 x	Insulation Resistance Tester MG500
1 x	Tungsten carbide cutter 1.0mm
1 x	Wood Lathe DB900
2 x	Cylinder sander WAS/E
1 x	Wire strippers 160mm
1 x	Glass fibre contact cleaner brush
1 x	Set of special steel cutters
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	SmartProg2
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Stainless steel cups
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Combination pliers 185mm
1 x	Disc cutters
1 x	Stainless steel wheels
2 x	Rounding over cutter 6.4mm
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Telephon pliers bent 160mm
2 x	sandpaper for PS 13 Grit 400
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	surface planing and thicknessing ADH 250
1 x	Telephon pliers bent 200mm
1 x	MICRO Band Saw MBS 240/E
1 x	Thicknesser DH 40
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Steel cups
2 x	Professional set for finish grinding and polishing
2 x	Super-fine sanding discs grain 400
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Polishing machine PM 100
2 x	Rebating cutter 6.4mm
1 x	Belt sander BS/E
1 x	Multiform grindstone
1 x	MICRO shaper MP 400
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x	Super-fine sanding discs grain 2000
2 x	Band knife of hardened spring band steel (without teeth)
2 x	Lambswool polishing disc
2 x	V-slot cutter 6.5mm
1 x	Edge cutter with pin 6.4mm
2 x	Core box bit 3.2mm
1 x	Set of precision cutters
1 x	sandpaper for PS 13 Grit 240
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Table Saw FET
1 x	Combination pliers 205mm
1 x	Replacement glue sticks for HKP 220
1 x	Fibre-Cut Discs
1 x	Diamond blade for MBS 240/E
1 x	Special Fused Alumina (Hardness N).
1 x	Backing disc for LWS
1 x	Scroll saw DS 230/E
1 x	Cone shaped milling cutter
1 x	Diamond Cutting Discs
2 x	Microfibre cloth
1 x	sandpaper for PS 13 Grot 180
1 x	Jig saw STS 12/E
1 x	TU 2404
1 x	Slot cutter 6.5mm
2 x	Half round cutter 13mm
1 x	Tungsten carbide cutter 2.0mm
1 x	Blade for Steel and brass
1 x	Three jaw chuck for the lathe DB 250
1 x	BeeProg2
2 x	Conj 5 pinças ESD
1 x	Diamond Cutting Discs
1 x	Precision lathe PD 250/E
1 x	Combination pliers 160mm
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Cups brushes
1 x	Tungsten carbide cutter 3.0mm
2 x	Insulation Resistance Tester MG125
1 x	Solid carbide stylus for engraving
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Table Sawr TKS 315 E
1 x	Delta sander OZI/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Lathe System PD 400
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Steel brushes
1 x	Cut off/mitre saw KGS 80
1 x	Telephon pliers straight 160mm
2 x	Angle polisher WP/E
1 x	Super jig saw STS/E
1 x	2-speed scroll saw DSH
1 x	Side cutters 180mm
1 x	Bench Circular Saw KS 230
1 x	MICRO Miller FF 500
1 x	Universal and oil siphoning pump AP 12
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Grinding mop cylinder grit 120
2 x	MICRO Miller FF 230
3 x	Dividing attachment TA 230 for PF 250
1 x	Broca de ponto 6.30 x 2.50
1 x	Bench drill machine TBM 220
2 x	MICROMOT drill stand MB 200
1 x	Saw blade made of high-alloy special steel
1 x	MICROMOT glue gun HKP 220
2 x	Mill/Drill System BFW 40/E
1 x	Precision drill grinder FBS 12/EF
1 x	Insert CCGT120404-AK
2 x	MICROMOT tool holder
4 x	Micro Compound Table KT 70
1 x	ESD Tweezers 5-194
3 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Screwdriver bit set. 49-piece.
2 x	Multipurpose Vices Primus100
2 x	Supercut jig saw blades of special steel
1 x	MICROMOT 50/E
1 x	PROTECTION 200ml
1 x	Tungsten tipped saw blade
1 x	MICROMOT 50/EF
1 x	Broca de ponto 5.00 x 2.00
1 x	Professional Drill/Grinder IBS/E
1 x	Machine Vice MS 4
2 x	Diamond blade
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Router base OFV
1 x	HSS immersion saw blades for OZI
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mill/Drill Unit BFB 2000.
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Precision steel vice PM 40
2 x	MICROMOT 230/E
1 x	Chuck for TBM 220
2 x	Sanding pads for OZI 220/E grit 150
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Crosscut 'Super-Cut' blade
1 x	Grinding mop cylinder grit 120
1 x	Precision caliper 500mm
1 x	ACCENT SERVICE TOOLS SET
1 x	MULTI 200ml
1 x	Broca de ponto 3.15 x 1.25
1 x	Broca de ponto 8.00 x 3.15
1 x	ESD Tweezers 5-195
1 x	EUROline-Conductive set of pliers
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Gear Chuck
1 x	Long neck straight drill/grinder LB/E
1 x	Grinding mop cylinder grit 80
1 x	MICRO Miller MF 70
1 x	Sanding pads for OZI 220/E grit 80
1 x	Jig saw blades made of HSS
2 x	14-piece parallel supports set
1 x	BIT-SET
1 x	Precision Drill/Grinder FBS 240/E
1 x	Diamond cutting blade for OZI
1 x	Footswitch FS
1 x	Three-jaw steel drill chuck
1 x	sanding belts for BBS/s Grit 150
1 x	Collet Set for accurate use on round components
1 x	Multipurpose Vices Primus 75

€23,246.48