€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Multiform grindstone
1 x	MICROMOT Mains Adapter NG 5/E
1 x	MICROMOT tool holder
1 x	Jig saw blades made of HSS
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Fine dust paper filter for CW-matic
1 x	MICROMOT Mains Adapter NG 2/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Gear Chuck
1 x	Sanding pads for OZI 220/E grit 240
1 x	sanding belts for BBS/s Grit 150
1 x	Independent four jaw chuck for the DB 250
1 x	HSS immersion saw blades for OZI
1 x	Blade holders for DS 460
1 x	Sanding pads for OZI 220/E grit 150
1 x	sanding belts for BBS/s Grit 240
1 x	Flexishaft MICROMOT 110/BF
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 80
1 x	Protective device for hand-operated MICROMOT
1 x	HSS immersion saw blades for OZI
1 x	Footswitch FS
1 x	Diamond cutting blade for OZI
1 x	MICROMOT extension cord. 300cm.
1 x	Supercut jig saw blades of special steel
1 x	HSS cutting blade for OZI
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Spare cutting wire
1 x	Tungsten Carbide Tipped (TCT)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Corundum grinding disc for LWS
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Edge cutter with pin 6.4mm
1 x	Corundum sanding discs for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	10-piece wood router cutter set
1 x	Blade for Steel and brass
1 x	Three jaw chuck for the lathe DB 250
1 x	Diamond blade for MBS 240/E
1 x	Sanding fleece for LWS
1 x	V-slot cutter 6.5mm
1 x	CRIMPING PLIERS/WIRE STRIPPER

€885.31