€304.00 + VAT

Surface planer AH 80
[27044]

Load bearing components are all made of die-cast aluminium with CNC-machined fits. These characteristics are essential for vibrationfree, clean planing of soft and hard woods.

With flat-milled table. Right table half with fine feed using a toggle screw for chip removal from 0 to 0.8mm with a planing width of maximum 80mm. With adjustable longitudinal stop, inclinable on both sides by 45° (scale available).

The heart of the machine: Large, ball-bearing planer block with exchangeable HSS blades. Low-noise drive using DC special motor with toothed belts. With practical milling protection that does not interfere during work. Main switch with emergency-stop function and restart protection. A suction connection with vacuum cleaner adapter permits clean working. Including work piece pusher.

Other technical data:
220 - 240V. 50/60Hz. Table 400 x 80mm. Planing width 80mm. Maximum depth of cut (infeed depth) 0.8mm. Blade speed 6,000rpm. Weight approx. 5.5kg. Insulated to class 1.

Reviews

Customers who bought this product also purchased

Tungsten Carbide Tipped (TCT)	Super-Cut	Table Saw FET
Crosscut 'Super-Cut' blade

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 120
3 x	Table Saw TKS 2500 SC
1 x	Independent four jaw chuck for the DB 250
1 x	Microfibre cloth
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Core box bit 3.2mm
1 x	Slot cutter 6.5mm
1 x	V-slot cutter 6.5mm
1 x	Angle cutter 45 °
2 x	Three jaw chuck for the lathe DB 250
1 x	Rounding over cutter 6.4mm
1 x	Diamond-coated cutting disc for MIC
1 x	Super-fine sanding discs grain 400
1 x	Five piece HSS chisel set
1 x	Professional polishing sponge
1 x	Grinding mop cylinder grit 240
1 x	Super-fine sanding discs grain 2000
1 x	Slot cutter 3.2mm
1 x	Three-jaw steel drill chuck
1 x	Cutting disc, with reinforcement
1 x	sanding belts for BBS/s Grit 240
3 x	14-piece parallel supports set
1 x	Flexishaft MICROMOT 110/P
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	MICROMOT drill stand MB 200
1 x	Replacement carving blades for MSG
1 x	Flexishaft MICROMOT 110/BF
1 x	surface planing and thicknessing ADH 250
2 x	Aluminium Die-Cast
2 x	MICROMOT extension cord. 300cm.
1 x	surface planing and thicknessing ADH 200
1 x	Dividing attachment TA 230 for PF 250
3 x	Footswitch FS
1 x	Protective device for hand-operated MICROMOT
1 x	Universal polishing paste
2 x	MICROMOT steel collet set
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Belt sander BBS/S
1 x	Mill/Drill Unit BFB 2000.
1 x	Wood Lathe DB450
1 x	Wood Lathe DB900
1 x	Micro Compound Table KT 70
1 x	Corundum sanding discs for LWS
1 x	Crosscut 'Super-Cut' blade
1 x	Four Jaw Chuck
1 x	Spare cutting wire
1 x	Cylinder sander WAS/E
3 x	Replacement glue sticks for HKP 220
1 x	Gear Chuck
2 x	Centre Turning Attachment
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cylinder shaped milling cutters
1 x	Cotton polishers
1 x	Cut off/mitre saw KGS 80
3 x	MICROMOT Mains Adapter NG 2/S
1 x	Cups brushes
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Corundum bound cutting disc for LWS
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cotton polishers
1 x	Corundum grinding disc for LWS
1 x	Conjunto de três brocas de ponto
2 x	Universal and oil siphoning pump AP 12
1 x	Super-fine sanding discs grain 000
1 x	MICRO Miller FF 500
1 x	Long neck angle grinder LHW
2 x	Step clamps made of steel
1 x	MICRO Miller FF 230
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Felt polishers
1 x	Replacement belts for BSL 220/E
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Warding files set, 6pcs
1 x	Multipurpose Vices Primus 75
1 x	Fluted filter for CW-matic
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Router base OFV
1 x	Felt polishers
1 x	Special Fused Alumina (Hardness N).
1 x	Machine Vice MS 4
1 x	Bench Circular Saw KS 230
1 x	MICROMOT 50/EF

€14,302.94