€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Backing disc for LWS
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Wire strippers 165mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	V-slot cutter 6.5mm
1 x	Fluted filter for CW-matic
2 x	Combi cutter 6.5/2.5mm
2 x	Blade holders for DS 460
2 x	Corundum grinding disc for LWS
3 x	Jig saw blades made of HSS
1 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Supercut jig saw blades of special steel
1 x	Corundum fan sander for LWS
1 x	Machine Vice MS 4
2 x	Grinding mop cylinder grit 240
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Half round cutter 13mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	High quality corundum grinding bits
2 x	Dividing attachment TA 230 for PF 250
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Blade for Wood and Plastics
1 x	MICROMOT steel collet set
2 x	Footswitch FS
1 x	Flexible silicon discs
1 x	MICROMOT tool holder
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Corundum grinding disc for LWS
2 x	Three jaw chuck for the lathe DB 250
1 x	Diamond-coated cutting disc for MIC
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Fibre-Cut Discs
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROMOT drill stand MB 200
2 x	sandpaper for PS 13 Grot 180
2 x	Blade guides separately
1 x	Pensander PS 13
1 x	High quality corundum grinding bits
2 x	Diamond blade for MBS 240/E
1 x	14-piece parallel supports set
1 x	MICROMOT Mains Adapter NG 2/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	High quality corundum grinding bits
1 x	Engraving tool GG
1 x	Collet Set for accurate use on round components
1 x	Aluminium Die-Cast
1 x	Crosscut 'Super-Cut' blade
1 x	Blade for Steel and brass
2 x	Tungsten Carbide Tipped (TCT)
1 x	Felt polishers
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Four Jaw Chuck
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Diamond-coated cutting and roughing disc
1 x	Complete Engraving Kit with trial glass
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	sandpaper for PS 13 Grit 240
1 x	Tungsten carbide cutters set
2 x	Replacement glue sticks for HKP 220
1 x	Sanding fleece for LWS
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Flexishaft MICROMOT 110/P
1 x	Step clamps made of steel
1 x	Gear Chuck
1 x	Sanding fleece for LWS
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Five piece HSS chisel set
2 x	Three-jaw steel drill chuck
1 x	sandpaper for PS 13 Grit 400
1 x	Cutting disc, with reinforcement
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Steel brushes
1 x	Flexishaft MICROMOT 110/BF
1 x	Bench Circular Saw KS 230
1 x	Brass brushes

€2,697.21