€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Grinding mop cylinder grit 120
1 x	High quality corundum grinding bits
1 x	HSS immersion saw blades for OZI
2 x	Independent four jaw chuck for the DB 250
2 x	Lathe System PD 400
1 x	HSS cutting blade for OZI
2 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	Sanding Drums
1 x	Ball shaped milling cutters
2 x	Three-jaw steel drill chuck
2 x	Replacement belts for BSL 220/E
1 x	Sanding Discs
3 x	10-piece wood router cutter set
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Machine Vice MS 4
1 x	High quality corundum grinding bits
1 x	Felt polishers
1 x	Precision Vice FMZ
1 x	Corundum fan sander for LWS
3 x	Mill/Drill Unit BFB 2000.
2 x	Four Jaw Chuck
2 x	Professional set for finish grinding and polishing
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Fixed Steady
1 x	Micro Compound Table KT 70
1 x	Diamond Cutting Discs
2 x	Gear Chuck
1 x	Belt sander BS/E
3 x	Collet Set for accurate use on round components
2 x	Replacement belts for BSL 220/E
2 x	Tool holder for rotary tools
1 x	Fine dust paper filter for CW-matic
3 x	Backing disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Grinding mop cylinder grit 120
1 x	MICROMOT tool holder
1 x	Belt sander BBS/S
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	MICROMOT drill stand MB 200
3 x	Precision steel vice PM 40
1 x	HSS immersion saw blades for OZI
3 x	Precision lathe PD 250/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	2-speed scroll saw DSH
1 x	Crimping plier for BNC
1 x	Sanding Drums
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Tungsten carbide cutters set
1 x	High quality corundum grinding bits
1 x	Super-fine sanding discs grain 000
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Grinding mop cylinder grit 80
1 x	MICRO Miller FF 230
1 x	High quality corundum grinding bits
2 x	Corundum grinding disc for LWS
3 x	Aluminium Die-Cast
1 x	V-slot cutter 6.5mm
1 x	Edge cutter with pin 6.4mm
1 x	HSS twist drill set to DIN 338
1 x	Blade for Steel and brass
1 x	Corundum fan sander for LWS
3 x	Dividing attachment TA 230 for PF 250
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Ball-shaped diamond coated 2.2mm
1 x	MICROMOT extension cord. 300cm.
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Fibre-Cut Discs
2 x	Flexishaft MICROMOT 110/BF
1 x	Ball-shaped diamond coated 1.2mm
1 x	Blade holders for DS 460
2 x	Cutting disc, with reinforcement
2 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Universal and oil siphoning pump AP 12
3 x	Centre Turning Attachment
1 x	Slot cutter 6.5mm
1 x	Sanding pads for OZI 220/E grit 150
2 x	Flexishaft MICROMOT 110/P
2 x	Protective device for hand-operated MICROMOT
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond Cutting Discs
1 x	Fluted filter for CW-matic
1 x	Slot cutter 5.0mm
1 x	Corundum sanding discs for LWS
1 x	Combi cutter 6.5/2.5mm
1 x	High quality corundum grinding bits
1 x	Three piece thread cutting set
2 x	Angle cutter 45 °
1 x	Five piece HSS chisel set
2 x	Corundum grinding disc for LWS
1 x	Half round cutter 13mm
2 x	Multipurpose Vices Primus 75
1 x	Wolfram vanadium steel milling bits
1 x	Flap Wheels
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Rounding over cutter 6.4mm
1 x	Mill/Drill System BFW 40/E
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Sanding pads for OZI 220/E grit 240
1 x	Felt polishers
1 x	MICROMOT Mains Adapter NG 2/E
2 x	Chuck for TBM 220
1 x	MICROMOT steel collet set
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	Lambswool polishing disc
2 x	14-piece parallel supports set
1 x	Diamond Coated
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x
1 x	Diamond-coated cutting and roughing disc
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Angle polisher WP/E
2 x	Replacement belts for BSL 220/E
1 x	BeeHive208S
1 x	Special Fused Alumina (Hardness N).
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Multipurpose Vices Primus100
1 x	Router base OFV
1 x	MICRO shaper MP 400
1 x	Diamond Cutting Discs
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Hot wire cutter THERMOCUT 650
1 x	Sanding pads for OZI 220/E grit 80
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Bench drill press TBH
2 x	Fibre-Cut Discs
1 x	Bench Circular Saw KS 230
1 x	Sanding bands 14x13mm
1 x	Polishing felt, medium hard
1 x	Professional polishing sponge
1 x	Diamond Grinding Bits 1,8mm
1 x	Thicknesser DH 40
1 x	Fibre-Cut Discs
1 x	Footswitch FS
1 x	Felt polishers
1 x	Diamond-coated cutting disc for MIC
1 x	High quality corundum grinding bits
1 x	Screwdriver bit set. 49-piece.
1 x	Bench drill machine TBM 220
1 x	Super-fine sanding discs grain 400
1 x	Microfibre cloth
2 x	Super safety and specialty bit set, 75-piece
1 x	Silicon-Carbide.
1 x	Steel brushes
1 x	Core box bit 3.2mm
1 x	Super-fine sanding discs grain 2000
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Universal holder UHZ
1 x	Conjunto de três brocas de ponto
1 x	Engraving tool GG
1 x	Diamond cutting blade for OZI
1 x	Polishing Set
1 x	Step clamps made of steel
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Slot cutter 3.2mm
1 x	BeeHive204
1 x	Ball-shaped diamond coated 3.2mm
1 x	Precision Vice FMS 75

€25,843.31