€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Wolfram vanadium steel milling bits
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Super safety and specialty bit set, 75-piece
1 x	High quality corundum grinding bits
3 x	Dial gauge
1 x	Complete Engraving Kit with trial glass
2 x	Combi cutter 6.5/2.5mm
1 x	Protective device for hand-operated MICROMOT
1 x	Fixed Steady
1 x	Thicknesser DH 40
3 x	Flexible silicon discs
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Digital caliper gauge 300 mm
1 x	Nylon Fleece Brushes
1 x	Belt sander BS/E
2 x	Crosscut 'Super-Cut' blade
2 x	Steel tape measure
2 x	Diamond Grinding Bits 5mm
1 x	Multipurpose Vices Primus 75
1 x	HSS twist drill set to DIN 338
1 x	Cotton polishers
2 x	Replacement belts for BSL 220/E
1 x	Four Jaw Chuck
1 x	Cone shaped milling cutter
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Broca de alta duração de 2.4mm
1 x	Cylinder sander WAS/E
1 x	MICRO Band Saw MBS 240/E
1 x	Flexible silicon discs
2 x	Precision magnetic gauge stand
1 x	Ball-shaped diamond coated 1.2mm
1 x	Collet Set for accurate use on round components
1 x	Blade holders for DS 460
1 x	magnetic base 80kg
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Screwdriver bit set. 49-piece.
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 650
2 x	Precision caliper 500mm
1 x	Precision lathe PD 250/E
1 x	Cotton polishers
1 x	Sanding Discs
1 x	Fibre-Cut Discs
1 x	10-piece wood router cutter set
3 x	Chuck for TBM 220
1 x	Hot wire cutter THERMOCUT 12/E
1 x	MICROMOT drill stand MB 200
1 x	Corundum sanding discs for LWS
1 x	Backing disc for LWS
1 x	Flexible polishing pad set
3 x	Centre Turning Attachment
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond blade
1 x	Sanding Drums
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Step clamps made of steel
1 x	Multipurpose Vices Primus100
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Gear Chuck
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Precision steel vice PM 40
3 x	Polishing Set
1 x	Diamond Cutting Discs
1 x	Tool holder for rotary tools
2 x	Bench drill press TBH
1 x	Diamond Grinding Bits 1,8mm
1 x	Long neck angle grinder LHW
1 x	Lever Dial Indicator
2 x	Flexible polishing pad set
1 x	Ball-shaped diamond coated 3.2mm
1 x	Disc Sander TG 250/E
1 x	14-piece parallel supports set
1 x	Corundum sanding discs for LWS
1 x	Sanding bands 14x13mm
1 x	Wolfram vanadium steel milling bits
1 x	Ball-shaped diamond coated 2.2mm
2 x	Supercut jig saw blades of special steel
1 x	Conjunto de três brocas de ponto
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
2 x	Precision caliper square
1 x	Delta sander OZI/E
1 x	Corundum fan sander for LWS
1 x	Angle polisher WP/E
1 x	Blade for Wood and Plastics
1 x	Professional set for finish grinding and polishing
1 x	Magnetic base
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	MICRO Miller FF 230
1 x	Diamond Grinding Bits 1,8mm
1 x	Universal holder UHZ
1 x	VIDEOCLEAN 200ml
2 x	Special Fused Alumina (Hardness N).
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Professional Drill/Grinder IBS/E
1 x	sandpaper for PS 13 Grit 240
1 x	MICRO Miller MF 70
1 x	Milling cutter set (6 - 10mm)
1 x	Angle cutter 45 °
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
1 x	Micro Compound Table KT 70
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Tungsten Carbide Tipped (TCT)
1 x	Quick-action tool holder kit SWH AA
1 x	TUNER 200ml
1 x	Grinding and Polishing Machine SP/E
1 x	High quality corundum grinding bits
1 x	IC tweezers
1 x	MICRO Miller FF 500
1 x	VASELINE 200ml
1 x	MICROMOT 50/E
1 x	Universal and oil siphoning pump AP 12
1 x	Metal Cutting Blades
1 x	PROTECTION 200ml
1 x	Five piece HSS chisel set
1 x	Half round cutter 13mm
1 x	centrically clamping 100mm
1 x	MICROMOT 230/E
1 x	MICROMOT steel collet set
1 x	Bench drill machine TBM 220
2 x	Cutter head for copy and surface milling MT3
1 x	MICROMOT 50
1 x	Flexishaft MICROMOT 110/P
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	SILICONE 200ml
2 x	Machine Vice MS 4
1 x	sandpaper for PS 13 Grit 400
1 x	Mill/Drill System BFW 40/E
1 x	Tool holder type H for SWH 1-A
1 x	Long neck straight drill/grinder LB/E
1 x	3-jaw chuck centrically clamping 80mm
1 x	FREEZER-BR 200ml
1 x	Replacement belts for BSL 220/E
1 x	Corundum fan sander for LWS
1 x	3-jaw chuck centrically clamping 160mm
1 x	Fluted filter for CW-matic
1 x	End milling cutter kit HSS 12 pcs
1 x	MICRO shaper MP 400
1 x	Router base OFV
1 x	centrically clamping 125mm
1 x	Cutter head for copy and surface milling MT2
1 x	sandpaper for PS 13 Grot 180

€14,571.53