€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	EUROline top cutter
1 x	Gear Chuck
2 x	EUROline mini side cutter
1 x	EUROline flat nose pliers
2 x	Mini side cutters EUROline-Conductive
1 x	TORX-screwdrivers T10
1 x	EUROline side cutter rounded head
1 x	TORX-screwdrivers T7
1 x	ESD-handling set
1 x	Steel tape measure
1 x	6-piece set of ESD/EGB tweezers
2 x	Ceramic-tipped tweezers and ESD 5-095
2 x	Pinça SOIC de 8 pinos
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	End side cutters 45º EUROline-Conductive
1 x	Floor cover ESD
1 x	TORX-screwdrivers T20
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	EUROline round nose pliers
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Snipe nose pliers 45º EUROline-Conductive
3 x	Brass contact cleaner brush
1 x	EUROline snipe nose pliers
2 x	Mini side cutters EUROline-Conductive
1 x	EUROline side cutter pointed head
2 x	Earth wire with dummy Schunko-plug
1 x	Socket Wrenches 4.5
1 x	Screwdriver 1.2
3 x	Earthing module
1 x	Screwdriver 0.8
1 x	ESD Tweezers 5-195
2 x	Glass fibre contact cleaner brush
1 x	EUROline set of pliers
1 x	ESD Brushe
1 x	Screwdriver 4.0
1 x	Socket Wrenches 3.5
1 x	Conj 5 pinças ESD
1 x	Screwdriver 5.5
1 x	Socket Wrenches 5.5
1 x	Screwdriver 1.8
1 x	Earth wire
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	6-piece wrench key set ESD
2 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Wrench Keys 0.9
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Contact bracelet with spiral cord
1 x	ESD Tweezers 5-193
1 x	6-piece TORX-screwdriver-set ESD
1 x	ESD Tweezers 5-191
1 x	ESD Tweezers 5-194
1 x	Socket Wrenches 2.0
1 x	ESD Brushe
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Felt polishers
1 x	Fibre-Cut Discs
1 x	Cross-recess Screwdrivers 000
1 x	FREEZER-TOP 200ml
1 x	Diamond Cutting Discs
2 x	Handy 1515
1 x	Side cutters EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	ANTISTATIC 200ml
1 x	Cross-recess Screwdrivers 00
1 x	Fibre-Cut Discs
1 x	Cotton polishers
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Flexible silicon discs
1 x	Diamond Cutting Discs
1 x	6-piece screwdriver set ESD
1 x	Diamond Cutting Discs
1 x	Felt polishers
1 x	Mini side cutters EUROline-Conductive
3 x	BIT-SET
1 x	PRINTER 200ml
1 x	Insulation Resistance Tester MG500
1 x	Thicknesser DH 40
1 x	Nylon Fleece Brushes
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Broca de alta duração de 2.8mm
1 x	Broca de alta duração de 2.4mm
1 x	Broca de alta duração de 2.3mm
1 x	Sanding bands 14x13mm
1 x	MICRO Band Saw MBS 240/E
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 2.5mm
1 x	MICRO cutter MIC
1 x	MICRO shaper MP 400
1 x	Scroll saw DS 230/E
1 x	Broca de alta duração de 2.0mm
1 x	Crimping plier for BNC
1 x	broca de alta duração de 0,2mm
1 x	Broca de alta duração de 2.9mm
2 x	Table Saw FET
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Broca de alta duração de 0.8mm
1 x	MICRO woodturning lathe DB 250
1 x	Boring Bar for CCMT 16mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

€5,794.11