Top » Catalog » Drilling-milling machine » End mill » 3350213

€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	sandpaper for PS 13 Grit 240
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Rounding over cutter 6.4mm
1 x	Half round cutter 13mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Rebating cutter 6.4mm
1 x	Replacement belts for BSL 220/E
1 x	Bench drill press TBH
1 x	Grinding mop cylinder grit 120
1 x	Universal and oil siphoning pump AP 12
1 x	MICROMOT 230/E
1 x	MICROMOT extension cord. 300cm.
1 x	MICRO Miller FF 500
1 x	14-piece parallel supports set
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Disc Sander TG 125/E
1 x	Polishing felt, medium hard
1 x	Blade guides separately
1 x	Fixed Steady
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	MICROMOT steel collet set
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Chuck for TBM 220
1 x	Belt sander BS/E
1 x	Replacement belts for BSL 220/E
1 x	Professional polishing sponge
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Mill/Drill Unit BFB 2000.
1 x	Gear Chuck
1 x	MICROMOT tool holder
1 x	Pensander PS 13
1 x	Flexishaft MICROMOT 110/P
1 x	Cylinder sander WAS/E
1 x	Super-Cut
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Long neck angle grinder LHW
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Lambswool polishing disc
1 x	Collet Set for accurate use on round components
1 x	Screwdriver bit set. 49-piece.
1 x	Backing disc for LWS
1 x	Diamond blade for MBS 240/E
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Super-fine sanding discs grain 000
1 x	Micro Compound Table KT 70
1 x	Blade for Steel and brass
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Delta sander OZI/E
1 x	Three-jaw steel drill chuck
1 x	Grinding mop cylinder grit 240
1 x	Precision Drill/Grinder FBS 240/E
1 x	Diamond-coated cutting and roughing disc
1 x	Tool holder for rotary tools
1 x	Inpection mirror 1-978
1 x	MICROMOT 50
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Centre Turning Attachment
1 x	Precision drill grinder FBS 12/EF

€4,704.50