centrically clamping 125mm, Oficina-digital.com

Top » Catalog » Lathes » Optimum-Quantum accessories » Chuck » 4-jaw chuck centrically clamping » 3442812

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
    Chuck->
      3-jaw chuck centrically clamping
      4-jaw chuck
      4-jaw chuck centrically clamping
    drill chuck
    Morse taper
    Quick-action tool holder
    Revolving center
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	MICRO shaper MP 400
1 x	High quality corundum grinding bits
2 x	Precision lathe PD 250/E
2 x	Tungsten Carbide Tipped (TCT)
1 x	Flexishaft MICROMOT 110/BF
1 x	Three-jaw steel drill chuck
1 x	Replacement glue sticks for HKP 220
2 x	Footswitch FS
1 x	Super-Cut
1 x	High quality corundum grinding bits
1 x	Mill/Drill Unit BFB 2000.
1 x	Diamond Coated
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	High quality corundum grinding bits
1 x	Five piece HSS chisel set
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Crimping plier for BNC
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Saw blade made of high-alloy special steel
2 x	Special Fused Alumina (Hardness N).
2 x	Angle cutter 45 °
5 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement belts for BSL 220/E
2 x	Insulation Resistance Tester MG125
1 x	Corundum grinding disc for LWS
1 x	Rebating cutter 6.4mm
1 x	sandpaper for PS 13 Grot 180
1 x	MICROMOT glue gun HKP 220
1 x	Diamond-coated cutting and roughing disc
2 x	Slot cutter 5.0mm
1 x	Corundum grinding disc for LWS
1 x	Silicon-Carbide.
2 x	Half round cutter 13mm
1 x	Combi cutter 6.5/2.5mm
1 x	Slot cutter 6.5mm
2 x	Solid carbide saw blade
1 x	Fine dust paper filter for CW-matic
1 x	Universal and oil siphoning pump AP 12
1 x	IC Test clip 20 pins
5 x	MICROMOT Mains Adapter NG 5/E
2 x	Hot wire cutter THERMOCUT 650
1 x	Diamond blade
2 x	Rounding over cutter 6.4mm
1 x	Sanding fleece for LWS
2 x	10-piece wood router cutter set
1 x	Inspector mirror
1 x	Fluted filter for CW-matic
2 x	Slot cutter 3.2mm
1 x	Replacement belts for BSL 220/E
1 x	Corundum sanding discs for LWS
1 x	Corundum fan sander for LWS
1 x	sandpaper for PS 13 Grit 240
1 x	Corundum sanding discs for LWS
1 x	Sanding fleece for LWS
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Tungsten tipped saw blade
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Super-fine sanding discs grain 000
1 x	Magnetic base
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Microfibre cloth
1 x	V-slot cutter 6.5mm
1 x	Edge cutter with pin 6.4mm
2 x	Precision steel vice PM 40
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	MICRO Heat gun MH 550
1 x	Crosscut 'Super-Cut' blade
1 x	Step clamps made of steel
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Insulation Resistance Tester MG500
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cylinder sander WAS/E
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Three piece thread cutting set
2 x	HSS boring tool set, 6 pieces
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Lathe System PD 400
2 x	Chuck for TBM 220
1 x	Universal polishing paste
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Router base OFV
1 x	Disc Sander TG 125/E
1 x	Grinding mop cylinder grit 120
1 x	Compact workshop vacuum cleaner CW-matic
1 x	6pcs Double Open End wrench set
1 x	Micro Compound Table KT 70
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Precision caliper 500mm
2 x	MICROFLAME burner MFB/E
1 x	Belt sander BBS/S
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Table Saw FET
1 x	TU 2004V
1 x	Grinding mop cylinder grit 120
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROFLAM gas soldering set MGS
1 x	TU 1503V
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	TU 2404
1 x	Grinding mop cylinder grit 80
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Cutting disc, with reinforcement
1 x	Engraving tool GG
1 x	MICROMOT 50/EF
1 x	EUROline side cutter rounded head

€15,108.23