€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Reviews

Categories

Manufacturers

Information

2 x	Cutter head for copy and surface milling MT3
1 x	Cutting disc, with reinforcement
1 x	MICRO Miller FF 500
2 x	Replacement belts for BSL 220/E
1 x	TOP-PIN 200ml
2 x	Replacement belts for BSL 220/E
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
3 x	Three jaw chuck for the lathe DB 250
1 x	Core box bit 3.2mm
1 x	Rebating cutter 6.4mm
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 5.0mm
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Independent four jaw chuck for the DB 250
1 x	10-piece wood router cutter set
3 x	Drill chuck with sliding sleeve for the tailstock
1 x	Super-fine sanding discs grain 2000
1 x	Microfibre cloth
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Replacement belts for BSL 220/E
1 x	Slot cutter 6.5mm
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Rounding over cutter 6.4mm
2 x	Five piece HSS chisel set
1 x	Cutter head for copy and surface milling MT2
1 x	Angle cutter 45 °
1 x	Combi cutter 6.5/2.5mm
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Polishing felt, medium hard
1 x	Edge cutter with pin 6.4mm
1 x	Super-fine sanding discs grain 400
1 x	Backing disc for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	EUROline side cutter rounded head
1 x	WCMT050308
1 x	Three-jaw steel drill chuck
1 x	Spare cutting wire
1 x	Mill/Drill Unit BFB 2000.
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	lathe tools 10mm
1 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)

€3,697.69