€7.30 + VAT

FREEZER-TOP 200ml
[1301412]

FREEZER-TOP 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-TOP is CFC-free.
  • It ensures reliable cooling down to -50° C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, nonflammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 1.08 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: none
ODP: 0.00
Reviews

Customers who bought this product also purchased
BeeProg2
BeeProg2
Manufacturers
1 x sandpaper for PS 13 Grot 180
1 x MICROMOT Mains Adapter NG 5/E
1 x Slot cutter 6.5mm
2 x Replacement glue sticks for HKP 220
1 x Edge cutter with pin 6.4mm
1 x Diamond-coated cutting disc for MIC
1 x Rounding over cutter 6.4mm
1 x Slot cutter 3.2mm
1 x sandpaper for PS 13 Grit 240
1 x MICROMOT Mains Adapter NG 2/S
1 x MICROMOT steel collet set
1 x MICROMOT extension cord. 300cm.
1 x Footswitch FS
1 x Angle cutter 45 °
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Aluminium Die-Cast
1 x 10-piece wood router cutter set
1 x Fluted filter for CW-matic
1 x Slot cutter 5.0mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x MICROMOT tool holder
1 x Micro Compound Table KT 70
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x V-slot cutter 6.5mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Flexishaft MICROMOT 110/P
1 x Three-jaw steel drill chuck
1 x Mill/Drill Unit BFB 2000.
1 x Grinding mop cylinder grit 120
2 x Fine dust paper filter for CW-matic
1 x Flexishaft MICROMOT 110/BF
1 x Half round cutter 13mm
1 x sandpaper for PS 13 Grit 400
1 x Sanding fleece for LWS
1 x Jig saw STS 12/E
1 x Corundum fan sander for LWS
1 x Corundum fan sander for LWS
1 x HSS cutting blade for OZI
1 x Step clamps made of steel
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x HSS immersion saw blades for OZI
1 x Corundum grinding disc for LWS
1 x Grinding and Polishing Machine SP/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Super-fine sanding discs grain 000
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Compact workshop vacuum cleaner CW-matic
1 x Router base OFV
1 x Precision caliper 500mm
1 x PLCC Extractor
1 x Super-fine sanding discs grain 400
1 x Cylinder sander WAS/E
1 x Digital caliper gauge 300 mm
1 x Super safety and specialty bit set, 75-piece
2 x Backing disc for LWS
1 x Silicon-Carbide.
1 x Bench drill press TBH
1 x Long neck angle grinder LHW
1 x Bench drill machine TBM 220
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Dividing attachment TA 230 for PF 250
1 x Insulation Resistance Tester MG500
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x 
1 x Belt sander BS/E
1 x Dial gauge
1 x Universal and oil siphoning pump AP 12
2 x Engraving tool GG
1 x Steel tape measure
1 x Independent four jaw chuck for the DB 250
1 x Belt sander BBS/S
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x MICROMOT 50/EF
1 x Magnetic base
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Disc Sander TG 250/E
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Tungstein carbide rasp - and cutting disc
1 x Coarse-toothed (10 TPI per 25mm)
1 x sanding belts for BBS/s Grit 80
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Sanding pads for OZI 220/E grit 240
1 x MICRO Miller FF 230
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Band knife of hardened spring band steel (without teeth)
1 x sanding belts for BBS/s Grit 150
1 x Professional polishing sponge
1 x Precision magnetic gauge stand
1 x Replacement belts for BSL 220/E
€4,697.39
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook