€3.27 + VAT

PRINTER 200ml
[1361412]

PRINTER 200ml

Efficiently Removes Ink, Paper and Toner Residues of all Kinds.

  • PRINTER is a mixture of carefully matched solvents ideal for the removal of colour and toner residues from matrix-, ink- and laser-printers.
  • PRINTER is also very effective in cleaning the paper entry mechanism and keeping free from paper dust.
  • Tiresome problems with the entry of paper are eliminated.
  • PRINTER does not attack the commonly used materials and evaporates without leaving any residues.

Application:

  • Intensive cleaning of printing units of all kinds.
  • Ink, toner and typewriter ribbon residues can be efficiently removed resulting in a perfect printing quality.
  • For the removal of paper dust from the printer's paper entry rollers, improving the grip and thereby improving the paper entry.
  • Also suitable for conventional typewriters, calculating machines, etc.

Technical Data:

 

Colour: colourless
Density: 0.69 g / cm³
Odour: characteristic
Compatibility with materials: good
Reviews
Manufacturers
1 x sandpaper for PS 13 Grot 180
1 x MICROMOT Mains Adapter NG 5/E
1 x Slot cutter 6.5mm
2 x Replacement glue sticks for HKP 220
1 x Edge cutter with pin 6.4mm
1 x Diamond-coated cutting disc for MIC
1 x Rounding over cutter 6.4mm
1 x Slot cutter 3.2mm
1 x sandpaper for PS 13 Grit 240
1 x MICROMOT Mains Adapter NG 2/S
1 x MICROMOT steel collet set
1 x MICROMOT extension cord. 300cm.
1 x Footswitch FS
1 x Angle cutter 45 °
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Aluminium Die-Cast
1 x 10-piece wood router cutter set
1 x Fluted filter for CW-matic
1 x Slot cutter 5.0mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x MICROMOT tool holder
1 x Micro Compound Table KT 70
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x V-slot cutter 6.5mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Flexishaft MICROMOT 110/P
1 x Three-jaw steel drill chuck
1 x Mill/Drill Unit BFB 2000.
1 x Grinding mop cylinder grit 120
2 x Fine dust paper filter for CW-matic
1 x Flexishaft MICROMOT 110/BF
1 x Half round cutter 13mm
1 x sandpaper for PS 13 Grit 400
1 x Sanding fleece for LWS
1 x Jig saw STS 12/E
1 x Corundum fan sander for LWS
1 x Corundum fan sander for LWS
1 x HSS cutting blade for OZI
1 x Step clamps made of steel
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x HSS immersion saw blades for OZI
1 x Corundum grinding disc for LWS
1 x Grinding and Polishing Machine SP/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Super-fine sanding discs grain 000
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Compact workshop vacuum cleaner CW-matic
1 x Router base OFV
1 x Precision caliper 500mm
1 x PLCC Extractor
1 x Super-fine sanding discs grain 400
1 x Cylinder sander WAS/E
1 x Digital caliper gauge 300 mm
1 x Super safety and specialty bit set, 75-piece
2 x Backing disc for LWS
1 x Silicon-Carbide.
1 x Bench drill press TBH
1 x Long neck angle grinder LHW
1 x Bench drill machine TBM 220
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Dividing attachment TA 230 for PF 250
1 x Insulation Resistance Tester MG500
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x 
1 x Belt sander BS/E
1 x Dial gauge
1 x Universal and oil siphoning pump AP 12
2 x Engraving tool GG
1 x Steel tape measure
1 x Independent four jaw chuck for the DB 250
1 x Belt sander BBS/S
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x MICROMOT 50/EF
1 x Magnetic base
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Disc Sander TG 250/E
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Tungstein carbide rasp - and cutting disc
1 x Coarse-toothed (10 TPI per 25mm)
1 x sanding belts for BBS/s Grit 80
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Sanding pads for OZI 220/E grit 240
1 x MICRO Miller FF 230
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Band knife of hardened spring band steel (without teeth)
1 x sanding belts for BBS/s Grit 150
1 x Professional polishing sponge
1 x Precision magnetic gauge stand
1 x Replacement belts for BSL 220/E
1 x MICRO Miller FF 500
€6,518.12
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook