€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
2 x EUROline mini side cutter
1 x Safety insulated screwdrivers 14-608 VDE
1 x Table Saw TKS 2500 SC
1 x High quality corundum grinding bits
1 x EUROline end cutter
2 x EUROline side cutter rounded head
1 x EUROline top cutter
2 x EUROline round nose pliers
1 x Screwdriver 3.0
2 x EUROline set of pliers
2 x EUROline side cutter pointed head
1 x MICROMOT Mains Adapter NG 2/S
1 x sanding belts for BBS/s Grit 80
1 x 
1 x EUROline mini side cutter
1 x EUROline mini side cutter
1 x MICROMOT Mains Adapter NG 2/E
1 x Diamond-coated cutting disc for MIC
1 x Screwdriver 1.8
1 x EUROline flat nose pliers
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Screwdriver 0.8
1 x Replacement cutting disc for MICRO cutter MIC
1 x EUROline mini side cutter
1 x High quality corundum grinding bits
1 x EUROline snipe nose pliers
1 x Sanding Drums
2 x CRIMPING PLIERS/WIRE STRIPPER
3 x Sanding Discs
1 x Mini side cutters EUROline-Conductive
1 x Sanding bands 14x13mm
1 x Wire strippers 165mm
1 x Round nose pliers 45º EUROline-Conductive
2 x Flap Wheels
2 x Mill/Drill Unit BFB 2000.
1 x BIT-SET
2 x Sanding Discs
1 x Safety Insulated Pozidriv Screwdriver 14-642VDE
2 x Sanding Drums
1 x Steel brushes
3 x Micro Compound Table KT 70
2 x Crimping plier for BNC
3 x Protective device for hand-operated MICROMOT
1 x DEGRESER 200ml
1 x Safety insulated screwdrivers 14-603 VDE
1 x End side cutters 45º EUROline-Conductive
1 x Brass brushes
1 x MICROMOT extension cord. 300cm.
1 x FLUX DISPENSING PEN, LEAD FREE
2 x Milling cutter set (6 - 10mm)
2 x Three-jaw steel drill chuck
1 x Stainless steel wheels
1 x PRINTER 200ml
1 x End side cutters EUROline-Conductive
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
3 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x Aluminium Die-Cast
2 x 14-piece parallel supports set
1 x Telephone pliers bent 205mm
2 x Flexishaft MICROMOT 110/BF
1 x Milling cutter set (2 - 5mm)
1 x Steel wheels
1 x VIDEOCLEAN 200ml
2 x Sanding Drums
1 x Snipe nose pliers 45º EUROline-Conductive
1 x FREEZER-TOP 200ml
3 x Sanding Drums
1 x SCREEN 200ml
1 x Self-adhesive white corundum sanding discs for TG 125/E
2 x MICROMOT drill stand MB 200
1 x Combination pliers 190mm
1 x Mini side cutters EUROline-Conductive
1 x Flat nose pliers 45º EUROline-Conductive
2 x Flexishaft MICROMOT 110/P
1 x PROLUB 200ml
1 x Nylon Fleece Brushes
2 x MICROMOT steel collet set
1 x Footswitch FS
2 x MICROMOT tool holder
1 x Corundum sanding discs for LWS
1 x Telephone pliers straight 205mm
1 x TUNER 200ml
1 x Wheels brushes
1 x Floor cover ESD
1 x Side cutters 160mm
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Disc Sander TG 250/E
2 x ANTISTATIC 200ml
1 x Side cutters 195mm
1 x Steel cups
1 x Round nose pliers 165mm
1 x Stainless steel brushes
1 x Sanding bands 14x13mm
1 x ESD-handling ser 9-361
1 x CD-CLEANER 200ml
1 x Lambswool polishing disc
1 x ESD Brushe
1 x Polishing felt, medium hard
1 x Inpection mirror 1-978
1 x Broca de alta duração de 2.4mm
€6,086.65
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook