Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	TCMT110204
1 x	Fibre-Cut Discs
1 x	Independent four jaw chuck for the DB 250
1 x	Felt polishers
2 x	Angle cutter 45 °
1 x	Sanding pads for OZI 220/E grit 150
1 x	Silicon-Carbide.
1 x	Universal polishing paste
2 x	Tungsten carbide cutter 2.0mm
1 x	Three jaw chuck for the lathe DB 250
1 x	Diamond blade for MBS 240/E
1 x	Threading inserts 60º
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Flexishaft MICROMOT 110/P
1 x	Polishing felt, medium hard
1 x	MICROMOT drill stand MB 200
1 x	Engraving tool GG
1 x	WCMT050308
1 x	Diamond Coated
2 x	End mill for aluminium 4mm
1 x	Edge cutter with pin 6.4mm
1 x	Protective device for hand-operated MICROMOT
2 x	Half round cutter 13mm
1 x	Universal and oil siphoning pump AP 12
1 x	Mill/Drill Unit BFB 2000.
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Cutter head for copy and surface milling MT2
1 x
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	DCMT070204
1 x	Ball shaped milling cutters
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Bench drill machine TBM 220
1 x	Grinding mop cylinder grit 80
2 x	Slot cutter 6.5mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Morse taper MT2 - B16
1 x	Chuck for TBM 220
1 x	End mill for aluminium 6mm
1 x	Steel brushes
1 x	Sanding pads for OZI 220/E grit 80
1 x	Tungsten tipped saw blade
1 x	Fibre-Cut Discs
1 x	Ball-shaped diamond coated 1.2mm
1 x	Cutting disc, with reinforcement
1 x	Five piece HSS chisel set
1 x	Brass brushes
1 x	Slot cutter 3.2mm
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Ball-shaped diamond coated 2.2mm
1 x	Dial gauge
1 x	Morse taper MT3 - B16
1 x	High quality corundum grinding bits
1 x	Footswitch FS
1 x	Three-jaw steel drill chuck
1 x	MICROMOT tool holder
1 x	10-piece wood router cutter set
1 x	Core box bit 3.2mm
1 x	HSS immersion saw blades for OZI
1 x	Combi cutter 6.5/2.5mm

€1,585.93