Top » Catalog » Drilling-milling machine » End mill » 3350213

€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Rounding over cutter 6.4mm
2 x	Tungsten tipped saw blade
1 x	Independent four jaw chuck for the DB 250
1 x	Slot cutter 5.0mm
2 x	Slot cutter 3.2mm
3 x	Supercut jig saw blades of special steel
1 x	Sanding pads for OZI 220/E grit 240
2 x	Core box bit 3.2mm
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Jig saw blades made of HSS
1 x	Special Fused Alumina (Hardness N).
2 x	sandpaper for PS 13 Grit 400
2 x	Solid carbide saw blade
1 x	Rebating cutter 6.4mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	Diamond cutting blade for OZI
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	MICROMOT Mains Adapter NG 5/E
2 x	10-piece wood router cutter set
1 x	sandpaper for PS 13 Grot 180
1 x	Blade guides separately
3 x	Half round cutter 13mm
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Sanding fleece for LWS
1 x	Corundum sanding discs for LWS
1 x	Blade for Wood and Plastics
1 x	Grinding mop cylinder grit 120
1 x	Edge cutter with pin 6.4mm
2 x	sandpaper for PS 13 Grit 240
1 x	Corundum grinding disc for LWS
2 x	Sanding pads for OZI 220/E grit 150
1 x	Multiform grindstone
1 x	Three jaw chuck for the lathe DB 250
2 x	Silicon-Carbide.
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Grinding mop cylinder grit 120
1 x	Slot cutter 6.5mm
1 x	Grinding mop cylinder grit 80
1 x	Diamond blade
1 x	Collet Set for accurate use on round components
1 x	OPTI BF20 VARIO
1 x	Dividing attachment TA 230 for PF 250
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Aluminium Die-Cast
3 x	HSS cutting blade for OZI
2 x
1 x	Protective device for hand-operated MICROMOT
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Combi cutter 6.5/2.5mm
1 x	Backing disc for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Angle cutter 45 °
1 x	Tungstein carbide rasp - and cutting disc
1 x	MICROMOT extension cord. 300cm.
1 x	Fine dust paper filter for CW-matic
1 x	Fluted filter for CW-matic
2 x	Micro Compound Table KT 70
1 x	V-slot cutter 6.5mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Centre Turning Attachment
1 x	Corundum bound cutting disc for LWS
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Cutting disc, with reinforcement
1 x	Three-jaw steel drill chuck
1 x	Corundum grinding disc for LWS
1 x	Universal polishing paste

€3,706.02