Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	4-jaw chuck individually clamping 125mm
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Crimping plier for BNC
1 x	Vacum SAA 901
1 x	Safety insulated screwdrivers 14-602 VDE
2 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Super-Cut
1 x	Tool holder for rotary tools
1 x	2-speed scroll saw DSH
1 x	Milling cutter set (2 - 5mm)
1 x	Universal holder UHZ
1 x	Nylon Fleece Brushes
1 x	Fibre-Cut Discs
1 x	Precision drill grinder FBS 12/EF
1 x	Backing disc for LWS
1 x	Professional Drill/Grinder IBS/E
2 x	Gear Chuck
1 x	Broca de ponto 3.15 x 1.00
1 x	Hand magnifier with LED light 3X
1 x	HSS twist drill set with centring pin
1 x	quantum revolving center CM2
1 x	sanding belts for BBS/s Grit 240
1 x	MICRO Miller MF 70
1 x	MICROFLAM gas soldering set MGS
1 x	MICROMOT drill stand MB 200
1 x	ESD Tweezers 5-192
1 x	Cutting disc, with reinforcement
1 x	Angle polisher WP/E
1 x	Cylinder sander WAS/E
1 x	Fibre-Cut Discs
1 x	3-jaw chuck centrically clamping 125mm
1 x	HSS cutting blade for OZI
1 x	Slot cutter 3.2mm
1 x	Complete Engraving Kit with trial glass
1 x	TIP SPT-3
1 x	Dividing attachment TA 230 for PF 250
1 x	Fixed Steady
1 x	Steel brushes
1 x	Half round cutter 13mm
1 x	Super-fine sanding discs grain 2000
1 x	Chuck for TBM 220
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Collet chuck ER25 for D250X550
1 x	MICRO woodturning lathe DB 250
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Sanding Drums
1 x	Flap Wheels
1 x	Machine Vice MS 4
1 x	MICRO Band Saw MBS 240/E
1 x	Diamond cutting blade for OZI
1 x	High quality corundum grinding bits
1 x	Sanding fleece for LWS
1 x	Insulation Resistance Tester MG125
1 x	Protective device for hand-operated MICROMOT
1 x	Broca de alta duração de 2.8mm
1 x	ESD Tweezers 5-193
1 x	Tool holder type D for SWH 1-A
1 x	Grinding mop cylinder grit 80
1 x	Edge cutter with pin 6.4mm
1 x	Jig saw blades made of HSS
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	HSS immersion saw blades for OZI
1 x	Angle cutter 45 °
1 x	HSS twist drill set to DIN 338
1 x	lathe tools 10mm
1 x	Fibre-Cut Discs
1 x	magnetic base 80kg

€3,504.25