Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Earthing module
1 x	Telephone pliers bent 165mm
2 x	Turning inserts CCMT060204
1 x	6-piece screwdriver and cross-recess set
1 x	Broca de ponto 3.15 x 1.25
2 x	High quality corundum grinding bits
3 x	PRINTER 200ml
2 x	SCREEN 200ml
2 x	Table Saw FET
1 x	Diamond Grinding Bits 5mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Brass brushes
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 1mm
1 x	Cups brushes
3 x	High quality corundum grinding bits
3 x	MICROMOT 230/E
2 x	WCMT050308
3 x	High quality corundum grinding bits
1 x	End side cutters 45º EUROline-Conductive
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Long neck angle milling/drilling unit LWB 220/E
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Brass contact cleaner brush
1 x	Motor-driven carving device MSG
1 x	MICROMOT 50/EF
2 x	Precision Drill/Grinder FBS 240/E
1 x	Insulation Resistance Tester MG125
1 x	High quality corundum grinding bits
1 x	Diamond Cutting Discs
2 x	Mill/Drill System BFW 40/E
2 x	Professional Drill/Grinder IBS/E
1 x	Precision drill grinder FBS 12/EF
1 x	High quality corundum grinding bits
1 x	Earth wire with dummy Schunko-plug
1 x	Side cutters EUROline-Conductive
1 x	DCMT070204
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	Bench drill machine TBM 220
1 x	MICRO Miller FF 230
3 x	FREEZER-BR 200ml
4 x	DUSTER-BR 200ml
1 x	ANTISTATIC 200ml
1 x	FREEZER-TOP 200ml
2 x	BeeProg2
1 x	Turning inserts CCMT09T304
3 x	Threading inserts 60º
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Combination pliers 185mm
2 x	Insert LGTN-2
1 x	PLCC Puller
2 x	High quality corundum grinding bits
2 x	Long neck straight drill/grinder LB/E
1 x	MICRO Miller FF 500
2 x	POLISHER 200ml
2 x	PLCC Extractor
1 x	Grinding mop cylinder grit 120
2 x	MICRO cutter MIC
1 x	Jig saw STS 12/E
2 x	Cut off/mitre saw KGS 80
2 x	MICRO shaper MP 400
1 x	ESD-handling ser 9-361
1 x	IC tweezers
1 x	MICRO woodturning lathe DB 250
1 x	Scroll saw DS 230/E
2 x	Surface planer AH 80
2 x	Flexible polishing pad set
1 x	SMD Tweezers 5-052
3 x	Felt polishers
1 x	Thicknesser DH 40
1 x	Beeprog2C
1 x	BGA-Bottom-209
2 x	BGA-Bottom-111
1 x	Flexible silicon discs
1 x	DIL8W/SOIC8 ZIF 150mil
2 x	HSS drill bits 1.0mm
1 x	BGA-Bottom-154
2 x	Sanding Drums
1 x	BGA-Bottom-204
2 x	Tungsten carbide drills Ø2mm
1 x	BGA-Bottom-201
1 x	BGA-Bottom-167
3 x	Sanding bands 14x13mm
3 x	Felt polishers
2 x	Tungsten carbide drills Ø1,5mm
1 x	BGA-0246/0244
1 x	BGA-Bottom-170
3 x	Flap Wheels
2 x	Cotton polishers
2 x	HSS drill bits 1.6mm
1 x	BGA-Bottom-8
1 x	Polishing paste
1 x	BGA-Bottom-202
2 x	Bottom PSOP44 NOR-1
1 x	BGA-Bottom-103
1 x	Sanding Drums
1 x	HSS twist drill set to DIN 338
2 x	Cotton polishers
1 x	BGA-Bottom-194
1 x	BGA-Bottom-187
1 x	Felt polishers
1 x	Telephon pliers bent 160mm
1 x	BGA-Bottom-215
1 x	Bottom PSOP44 NOR-3
2 x	Flexible silicon discs
1 x	BGA-Bottom-166
2 x	BeeHive208S
1 x	BGA-Bottom-9
1 x	BGA-Bottom-218
1 x	BGA-Bottom-164
1 x	BGA-Top-5 ZIF-CS
2 x	Sanding Discs
1 x	HSS drill bits 0.5mm
1 x	BGA-Bottom-177
1 x	BGA-Bottom-224
1 x	BGA-Bottom-221
1 x	DIL8/SOIC8 ZIF 150mil
2 x	BGA-Bottom-1
2 x	MICROFLAM gas soldering set MGS
2 x	Sanding Drums
1 x	BGA-Bottom-225
2 x	BGA-Bottom-106
2 x	Conjunto de três brocas de ponto
1 x	BGA-0245/0243
1 x	2-speed scroll saw DSH
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	BGA-Bottom-216
1 x	BGA-Bottom-171
1 x	BGA-0246/0243
1 x	BGA-Bottom-212
2 x	Tungsten carbide drills Ø1mm
1 x	BGA-Bottom-115
1 x	Flexible silicon discs
1 x	Warding files set, 6pcs
1 x	Flexible polishing pad set
1 x	BGA-Bottom-211
1 x	BGA-Bottom-20
1 x	DIL8/SOIC8 ZIF 200mil
1 x	Felt polishers
1 x	Sanding bands 14x13mm
1 x	BGA-Bottom-16
2 x	HSS drill bits 1.2mm
1 x	BGA-Bottom-18
1 x	Nylon Fleece Brushes
2 x	Sanding Discs
1 x	BGA-Bottom-88
1 x	BGA-Bottom-180
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL44/PLCC44 ZIF
2 x	BGA-Bottom-101
1 x	DIL32/PLCC32 ZIF
1 x	surface planing and thicknessing ADH 250
1 x	Flap Wheels
1 x	Table Saw TKS 2500 SC
1 x	Wood Lathe DB900
1 x	HSS twist drill set with centring pin
1 x	Wood Lathe DB450
1 x	BGA-Bottom-11

€36,217.84