€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Wood Lathe DB450
2 x Collet Set for accurate use on round components
1 x MICRO Miller FF 230
1 x Vacum SAA 901
1 x Crosscut 'Super-Cut' blade
1 x HSS immersion saw blades for OZI
2 x Cutter head for copy and surface milling MT2
1 x Diamond blade
3 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x Radius Cutting Attachment, complete with pointed tool
1 x PLCC Puller
1 x Socket Wrenches 3.2
2 x Tool holder for rotary tools
1 x Socket Wrenches 5.5
1 x ESD-handling ser 9-361
1 x Sanding pads for OZI 220/E grit 80
2 x Hot wire cutter THERMOCUT 650
1 x PLCC Extractor
2 x 
1 x Replacement belts for BSL 220/E
1 x Replacement belts for BSL 220/E
1 x MICRO Miller MF 70
1 x Hot wire cutter THERMOCUT 230/E
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x MICROMOT Mains Adapter NG 2/E
1 x Three jaw chuck for the lathe DB 250
1 x Independent four jaw chuck for the DB 250
1 x Sanding pads for OZI 220/E grit 240
1 x OPTI BF20 VARIO
1 x MICROMOT Mains Adapter NG 5/E
1 x OPTI BF16 Vario
1 x Microfibre polishing wheel, 15-ply (100mm)
2 x Centre Turning Attachment
1 x MICRO Miller FF 500
1 x HSS cutting blade for OZI
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Gear Chuck
1 x Diamond Coated
1 x Wood Lathe DB900
2 x Coarse-toothed (10 TPI per 25mm)
1 x Fixed Steady
1 x Cutter head for copy and surface milling MT3
1 x Coarse-toothed (25 TPI per 25mm)
1 x Socket Wrenches 4.0
1 x EUROline mini side cutter
1 x BeeHive204
1 x BGA-Bottom-11
1 x Cut off/mitre saw KGS 80
2 x EUROline side cutter pointed head
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Replacement glue sticks for HKP 220
1 x BGA-Bottom-111
1 x Coarse-toothed (18 TPI per 25mm)
1 x Broca de alta duração de 0.7mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Motor-driven carving device MSG
1 x EUROline side cutter rounded head
2 x MICRO cutter MIC
1 x Blade holders for DS 460
1 x BGA-Bottom-1
1 x 6-piece screwdriver and cross-recess set
1 x Broca de alta duração de 2.2mm
1 x BGA-Bottom-10
1 x Mini side cutters EUROline-Conductive
1 x Lathe tools 8mm pastilhados
1 x IC tweezers
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Broca de alta duração de 0.3mm
1 x HSS drill bits 0.5mm
1 x End side cutters EUROline-Conductive
1 x Side cutters EUROline-Conductive
1 x EUROline set of pliers
1 x Flat nose pliers 45º EUROline-Conductive
2 x EUROline mini side cutter
1 x Broca de alta duração de 1.4mm
1 x broca de alta duração de 0,2mm
1 x Mini side cutters EUROline-Conductive
1 x EUROline top cutter
1 x EUROline end cutter
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x BGA-Bottom-118
1 x Broca de alta duração de 0.8mm
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Solid carbide saw blade
1 x Side cutters 160mm
1 x Mini side cutters EUROline-Conductive
1 x lathe tools 10mm
1 x Jig saw STS 12/E
1 x Broca de alta duração de 2.5mm
€14,304.96
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook