€395.00 + IVA

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Conjunto de 6 pinças ESD/EGB
1 x	Fresa diamante esférica 3.2mm
1 x	Broca de alta duração de 2.0mm
1 x	DIL8/SOIC8 ZIF 200mil
2 x	Broca de alta duração de 0.3mm
1 x	Broca de alta duração de 3.0mm
1 x	Micro engenho de furar TBM 220
1 x	Alicate universal 160mm
1 x	Tambor de lixa Grão 240
1 x	Pinça anti-alérgica 5-121-1
2 x	conjunto de 6 chaves fendas e philips ESD
1 x	conjunto de 6 chaves fendas ESD
1 x	Disco de corte em HSS para OZI
1 x	DIL8/QFN8-1 ZIF-CS
1 x	Disco de corte diamantado Ø38mm
1 x	conjunto de 6 sextavadas exterior ESD
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	Chave de fendas isolada 14-601 VDE
1 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 1.1mm
1 x	Lixadeira de rolos BBS/S
1 x	Disco de corte diamantado com ventilação Ø38mm
1 x	Lixa para BBS/S grão 240
1 x	Torno Mecânico PD 250/E
1 x	Disco de corte diamantado Ø20mm
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL8/SOIC8 ZIF MB95-1
1 x	Top PSOP44 ZIF 600mil
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 2.5mm
1 x	conjunto de 6 sextavadas interior ESD
1 x	Broca de alta duração de 2.2mm
1 x	Lâmina de imersão em HSS para OZI
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	Programador universal BeeProg2
1 x	Alicate de pontas chatas 160mm
1 x	Alicate de pontas redondas 160mm
1 x	Pinça anti-alérgica 5-155-1
1 x	Lâmina tipo faca (sem dentes) em aço temperado
1 x	Tambor de lixa Grão 120
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1

€4,099.26